Examples with CommPortIdentifier gnu.io.CommPortIdentifier used on opensource projects

Example 71 with CommPortIdentifier

use of gnu.io.CommPortIdentifier in project JMRI by JMRI.

the class SerialDriverAdapter method openPort.

@Override
public String openPort(String portName, String appName) {
    // open the port, check ability to set moderators
    try {
        // get and open the primary port
        CommPortIdentifier portID = CommPortIdentifier.getPortIdentifier(portName);
        try {
            // name of program, msec to wait
            activeSerialPort = (SerialPort) portID.open(appName, 2000);
        } catch (PortInUseException p) {
            return handlePortBusy(p, portName, log);
        }
        // try to set it for communication via SerialDriver
        try {
            activeSerialPort.setSerialPortParams(9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
        } catch (gnu.io.UnsupportedCommOperationException e) {
            log.error("Cannot set serial parameters on port " + portName + ": " + e.getMessage());
            return "Cannot set serial parameters on port " + portName + ": " + e.getMessage();
        }
        // set RTS high, DTR high
        // not connected in some serial ports and adapters
        activeSerialPort.setRTS(true);
        // pin 1 in DIN8; on main connector, this is DTR
        activeSerialPort.setDTR(true);
        // disable flow control; hardware lines used for signaling, XON/XOFF might appear in data
        activeSerialPort.setFlowControlMode(0);
        // 50 mSec timeout before sending chars
        activeSerialPort.enableReceiveTimeout(50);
        // set timeout
        // activeSerialPort.enableReceiveTimeout(1000);
        log.debug("Serial timeout was observed as: " + activeSerialPort.getReceiveTimeout() + " " + activeSerialPort.isReceiveTimeoutEnabled());
        // get and save stream
        serialStream = activeSerialPort.getInputStream();
        // purge contents, if any
        purgeStream(serialStream);
        // report status
        if (log.isInfoEnabled()) {
            log.info("Wangrow " + portName + " port opened at " + activeSerialPort.getBaudRate() + " baud");
        }
        opened = true;
    } catch (gnu.io.NoSuchPortException p) {
        return handlePortNotFound(p, portName, log);
    } catch (Exception ex) {
        log.error("Unexpected exception while opening port " + portName + " trace follows: " + ex);
        ex.printStackTrace();
        return "Unexpected error while opening port " + portName + ": " + ex;
    }
    // indicates OK return
    return null;
}

Example 72 with CommPortIdentifier

use of gnu.io.CommPortIdentifier in project JMRI by JMRI.

the class Mx1Adapter method openPort.

@Override
public String openPort(String portName, String appName) {
    // open the port in MX-1 mode, check ability to set moderators
    try {
        // get and open the primary port
        CommPortIdentifier portID = CommPortIdentifier.getPortIdentifier(portName);
        try {
            // name of program, msec to wait
            activeSerialPort = (SerialPort) portID.open(appName, 2000);
        } catch (PortInUseException p) {
            return handlePortBusy(p, portName, log);
        }
        // try to set it for Can Net
        try {
            setSerialPort();
        } catch (gnu.io.UnsupportedCommOperationException e) {
            log.error("Cannot set serial parameters on port " + portName + ": " + e.getMessage());
            return "Cannot set serial parameters on port " + portName + ": " + e.getMessage();
        }
        // set timeout
        // activeSerialPort.enableReceiveTimeout(1000);
        log.debug("Serial timeout was observed as: " + activeSerialPort.getReceiveTimeout() + " " + activeSerialPort.isReceiveTimeoutEnabled());
        // get and save stream
        serialStream = activeSerialPort.getInputStream();
        // purge contents, if any
        purgeStream(serialStream);
        // report status?
        if (log.isInfoEnabled()) {
            // report now
            log.info(portName + " port opened at " + activeSerialPort.getBaudRate() + " baud with" + " DTR: " + activeSerialPort.isDTR() + " RTS: " + activeSerialPort.isRTS() + " DSR: " + activeSerialPort.isDSR() + " CTS: " + activeSerialPort.isCTS() + "  CD: " + activeSerialPort.isCD());
        }
        if (log.isDebugEnabled()) {
            // report additional status
            log.debug(" port flow control shows " + (activeSerialPort.getFlowControlMode() == SerialPort.FLOWCONTROL_RTSCTS_OUT ? "hardware flow control" : "no flow control"));
        }
        if (log.isDebugEnabled()) {
            // arrange to notify later
            activeSerialPort.addEventListener((SerialPortEvent e) -> {
                int type = e.getEventType();
                switch(type) {
                    case SerialPortEvent.DATA_AVAILABLE:
                        log.info("SerialEvent: DATA_AVAILABLE is " + e.getNewValue());
                        return;
                    case SerialPortEvent.OUTPUT_BUFFER_EMPTY:
                        log.info("SerialEvent: OUTPUT_BUFFER_EMPTY is " + e.getNewValue());
                        return;
                    case SerialPortEvent.CTS:
                        log.info("SerialEvent: CTS is " + e.getNewValue());
                        return;
                    case SerialPortEvent.DSR:
                        log.info("SerialEvent: DSR is " + e.getNewValue());
                        return;
                    case SerialPortEvent.RI:
                        log.info("SerialEvent: RI is " + e.getNewValue());
                        return;
                    case SerialPortEvent.CD:
                        log.info("SerialEvent: CD is " + e.getNewValue());
                        return;
                    case SerialPortEvent.OE:
                        log.info("SerialEvent: OE (overrun error) is " + e.getNewValue());
                        return;
                    case SerialPortEvent.PE:
                        log.info("SerialEvent: PE (parity error) is " + e.getNewValue());
                        return;
                    case SerialPortEvent.FE:
                        log.info("SerialEvent: FE (framing error) is " + e.getNewValue());
                        return;
                    case SerialPortEvent.BI:
                        log.info("SerialEvent: BI (break interrupt) is " + e.getNewValue());
                        return;
                    default:
                        log.info("SerialEvent of unknown type: " + type + " value: " + e.getNewValue());
                }
            });
            try {
                activeSerialPort.notifyOnFramingError(true);
            } catch (Exception e) {
                log.debug("Could not notifyOnFramingError: " + e);
            }
            try {
                activeSerialPort.notifyOnBreakInterrupt(true);
            } catch (Exception e) {
                log.debug("Could not notifyOnBreakInterrupt: " + e);
            }
            try {
                activeSerialPort.notifyOnParityError(true);
            } catch (Exception e) {
                log.debug("Could not notifyOnParityError: " + e);
            }
            try {
                activeSerialPort.notifyOnOverrunError(true);
            } catch (Exception e) {
                log.debug("Could not notifyOnOverrunError: " + e);
            }
        }
        opened = true;
    } catch (gnu.io.NoSuchPortException p) {
        return handlePortNotFound(p, portName, log);
    } catch (IOException | TooManyListenersException ex) {
        log.error("Unexpected exception while opening port {} trace follows: ", portName, ex);
        return "Unexpected error while opening port " + portName + ": " + ex;
    }
    // normal operation
    return null;
}

Example 73 with CommPortIdentifier

use of gnu.io.CommPortIdentifier in project JMRI by JMRI.

the class SerialDriverAdapter method openPort.

@Override
public String openPort(String portName, String appName) {
    // open the port in MX-1 mode, check ability to set moderators
    try {
        // get and open the primary port
        CommPortIdentifier portID = CommPortIdentifier.getPortIdentifier(portName);
        try {
            // name of program, msec to wait
            activeSerialPort = (SerialPort) portID.open(appName, 2000);
        } catch (PortInUseException p) {
            return handlePortBusy(p, portName, log);
        }
        // try to set it for Can Net
        try {
            setSerialPort();
        } catch (gnu.io.UnsupportedCommOperationException e) {
            log.error("Cannot set serial parameters on port " + portName + ": " + e.getMessage());
            return "Cannot set serial parameters on port " + portName + ": " + e.getMessage();
        }
        // set timeout
        // activeSerialPort.enableReceiveTimeout(1000);
        log.debug("Serial timeout was observed as: " + activeSerialPort.getReceiveTimeout() + " " + activeSerialPort.isReceiveTimeoutEnabled());
        // get and save stream
        serialStream = activeSerialPort.getInputStream();
        // purge contents, if any
        purgeStream(serialStream);
        // report status?
        if (log.isInfoEnabled()) {
            // report now
            log.info(portName + " port opened at " + activeSerialPort.getBaudRate() + " baud with" + " DTR: " + activeSerialPort.isDTR() + " RTS: " + activeSerialPort.isRTS() + " DSR: " + activeSerialPort.isDSR() + " CTS: " + activeSerialPort.isCTS() + "  CD: " + activeSerialPort.isCD());
        }
        if (log.isDebugEnabled()) {
            // report additional status
            log.debug(" port flow control shows " + (activeSerialPort.getFlowControlMode() == SerialPort.FLOWCONTROL_RTSCTS_OUT ? "hardware flow control" : "no flow control"));
        }
        if (log.isDebugEnabled()) {
            // arrange to notify later
            activeSerialPort.addEventListener(new SerialPortEventListener() {

                @Override
                public void serialEvent(SerialPortEvent e) {
                    int type = e.getEventType();
                    switch(type) {
                        case SerialPortEvent.DATA_AVAILABLE:
                            log.info("SerialEvent: DATA_AVAILABLE is " + e.getNewValue());
                            return;
                        case SerialPortEvent.OUTPUT_BUFFER_EMPTY:
                            log.info("SerialEvent: OUTPUT_BUFFER_EMPTY is " + e.getNewValue());
                            return;
                        case SerialPortEvent.CTS:
                            log.info("SerialEvent: CTS is " + e.getNewValue());
                            return;
                        case SerialPortEvent.DSR:
                            log.info("SerialEvent: DSR is " + e.getNewValue());
                            return;
                        case SerialPortEvent.RI:
                            log.info("SerialEvent: RI is " + e.getNewValue());
                            return;
                        case SerialPortEvent.CD:
                            log.info("SerialEvent: CD is " + e.getNewValue());
                            return;
                        case SerialPortEvent.OE:
                            log.info("SerialEvent: OE (overrun error) is " + e.getNewValue());
                            return;
                        case SerialPortEvent.PE:
                            log.info("SerialEvent: PE (parity error) is " + e.getNewValue());
                            return;
                        case SerialPortEvent.FE:
                            log.info("SerialEvent: FE (framing error) is " + e.getNewValue());
                            return;
                        case SerialPortEvent.BI:
                            log.info("SerialEvent: BI (break interrupt) is " + e.getNewValue());
                            return;
                        default:
                            log.info("SerialEvent of unknown type: " + type + " value: " + e.getNewValue());
                            return;
                    }
                }
            });
            try {
                activeSerialPort.notifyOnFramingError(true);
            } catch (Exception e) {
                log.debug("Could not notifyOnFramingError: " + e);
            }
            try {
                activeSerialPort.notifyOnBreakInterrupt(true);
            } catch (Exception e) {
                log.debug("Could not notifyOnBreakInterrupt: " + e);
            }
            try {
                activeSerialPort.notifyOnParityError(true);
            } catch (Exception e) {
                log.debug("Could not notifyOnParityError: " + e);
            }
            try {
                activeSerialPort.notifyOnOverrunError(true);
            } catch (Exception e) {
                log.debug("Could not notifyOnOverrunError: " + e);
            }
        }
        opened = true;
    } catch (gnu.io.NoSuchPortException p) {
        return handlePortNotFound(p, portName, log);
    } catch (Exception ex) {
        log.error("Unexpected exception while opening port " + portName + " trace follows: " + ex);
        ex.printStackTrace();
        return "Unexpected error while opening port " + portName + ": " + ex;
    }
    // normal operation
    return null;
}

Example 74 with CommPortIdentifier

use of gnu.io.CommPortIdentifier in project JMRI by JMRI.

the class SerialDriverAdapter method openPort.

@Override
public String openPort(String portName, String appName) {
    // open the port, check ability to set moderators
    try {
        // get and open the primary port
        CommPortIdentifier portID = CommPortIdentifier.getPortIdentifier(portName);
        try {
            // name of program, msec to wait
            activeSerialPort = (SerialPort) portID.open(appName, 2000);
        } catch (PortInUseException p) {
            return handlePortBusy(p, portName, log);
        }
        // try to set it for communication via SerialDriver
        try {
            activeSerialPort.setSerialPortParams(currentBaudNumber(getCurrentBaudRate()), SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
        } catch (gnu.io.UnsupportedCommOperationException e) {
            log.error("Cannot set serial parameters on port " + portName + ": " + e.getMessage());
            return "Cannot set serial parameters on port " + portName + ": " + e.getMessage();
        }
        // set RTS high, DTR high
        // not connected in some serial ports and adapters
        activeSerialPort.setRTS(true);
        // pin 1 in DIN8; on main connector, this is DTR
        activeSerialPort.setDTR(true);
        // disable flow control; hardware lines used for signaling, XON/XOFF might appear in data
        activeSerialPort.setFlowControlMode(0);
        // set timeout
        // activeSerialPort.enableReceiveTimeout(1000);
        log.debug("Serial timeout was observed as: " + activeSerialPort.getReceiveTimeout() + " " + activeSerialPort.isReceiveTimeoutEnabled());
        // get and save stream
        serialStream = activeSerialPort.getInputStream();
        // purge contents, if any
        purgeStream(serialStream);
        // report status?
        if (log.isInfoEnabled()) {
            log.info(portName + " port opened at " + activeSerialPort.getBaudRate() + " baud, sees " + " DTR: " + activeSerialPort.isDTR() + " RTS: " + activeSerialPort.isRTS() + " DSR: " + activeSerialPort.isDSR() + " CTS: " + activeSerialPort.isCTS() + "  CD: " + activeSerialPort.isCD());
        }
        opened = true;
    } catch (gnu.io.NoSuchPortException p) {
        return handlePortNotFound(p, portName, log);
    } catch (Exception ex) {
        log.error("Unexpected exception while opening port " + portName + " trace follows: " + ex);
        ex.printStackTrace();
        return "Unexpected error while opening port " + portName + ": " + ex;
    }
    // indicates OK return
    return null;
}

Example 75 with CommPortIdentifier

use of gnu.io.CommPortIdentifier in project JMRI by JMRI.

the class SerialDriverAdapter method openPort.

@Override
public String openPort(String portName, String appName) {
    String[] baudRates = validBaudRates();
    int[] baudValues = validBaudValues();
    // open the port, check ability to set moderators
    try {
        // get and open the primary port
        CommPortIdentifier portID = CommPortIdentifier.getPortIdentifier(portName);
        try {
            // name of program, msec to wait
            activeSerialPort = (SerialPort) portID.open(appName, 2000);
        } catch (PortInUseException p) {
            return handlePortBusy(p, portName, log);
        }
        // try to set it for comunication via SerialDriver
        try {
            // find the baud rate value, configure comm options
            // default, but also defaulted in the initial value of selectedSpeed
            int baud = baudValues[0];
            for (int i = 0; i < baudRates.length; i++) {
                if (baudRates[i].equals(mBaudRate)) {
                    baud = baudValues[i];
                }
            }
            activeSerialPort.setSerialPortParams(baud, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
        } catch (gnu.io.UnsupportedCommOperationException e) {
            log.error("Cannot set serial parameters on port " + portName + ": " + e.getMessage());
            return "Cannot set serial parameters on port " + portName + ": " + e.getMessage();
        }
        // set RTS high, DTR high
        // not connected in some serial ports and adapters
        activeSerialPort.setRTS(true);
        // pin 1 in DIN8; on main connector, this is DTR
        activeSerialPort.setDTR(true);
        // disable flow control; hardware lines used for signaling, XON/XOFF might appear in data
        activeSerialPort.setFlowControlMode(0);
        // 50 mSec timeout before sending chars
        activeSerialPort.enableReceiveTimeout(50);
        // set timeout
        // activeSerialPort.enableReceiveTimeout(1000);
        log.debug("Serial timeout was observed as: " + activeSerialPort.getReceiveTimeout() + " " + activeSerialPort.isReceiveTimeoutEnabled());
        // get and save stream
        serialStream = activeSerialPort.getInputStream();
        // purge contents, if any
        purgeStream(serialStream);
        // report status?
        if (log.isInfoEnabled()) {
            log.info(portName + " port opened at " + activeSerialPort.getBaudRate() + " baud, sees " + " DTR: " + activeSerialPort.isDTR() + " RTS: " + activeSerialPort.isRTS() + " DSR: " + activeSerialPort.isDSR() + " CTS: " + activeSerialPort.isCTS() + "  CD: " + activeSerialPort.isCD());
        }
        opened = true;
    } catch (gnu.io.NoSuchPortException p) {
        return handlePortNotFound(p, portName, log);
    } catch (Exception ex) {
        log.error("Unexpected exception while opening port " + portName + " trace follows: " + ex);
        ex.printStackTrace();
        return "Unexpected error while opening port " + portName + ": " + ex;
    }
    // indicates OK return
    return null;
}