Examples with IDockerConnection org.eclipse.linuxtools.docker.core.IDockerConnection used on opensource projects

Example 36 with IDockerConnection

use of org.eclipse.linuxtools.docker.core.IDockerConnection in project linuxtools by eclipse.

the class ContainerLauncher method fetchContainerDirs.

/**
 * Fetch directories from Container and place them in a specified location.
 *
 * @param connectionUri
 *            - uri of connection to use
 * @param imageName
 *            - name of image to use
 * @param containerDirs
 *            - list of directories to copy
 * @param excludedDirs
 *            - list of directories not to copy
 * @param hostDir
 *            - host directory to copy directories to
 * @return 0 if successful, -1 if failure occurred
 *
 * @since 4.0
 */
public int fetchContainerDirs(String connectionUri, String imageName, List<String> containerDirs, List<String> excludedDirs, IPath hostDir) {
    // Try and use the specified connection that was used before,
    // otherwise, open an error
    final IDockerConnection connection = DockerConnectionManager.getInstance().getConnectionByUri(connectionUri);
    if (connection == null) {
        Display.getDefault().syncExec(() -> MessageDialog.openError(PlatformUI.getWorkbench().getActiveWorkbenchWindow().getShell(), DVMessages.getString(ERROR_LAUNCHING_CONTAINER), DVMessages.getFormattedString(ERROR_NO_CONNECTION_WITH_URI, connectionUri)));
        return -1;
    }
    CopyVolumesFromImageJob job = new CopyVolumesFromImageJob(connection, imageName, containerDirs, excludedDirs, hostDir);
    job.schedule();
    return 0;
}

Example 37 with IDockerConnection

use of org.eclipse.linuxtools.docker.core.IDockerConnection in project linuxtools by eclipse.

the class ContainerLauncher method launch.

/**
 * Perform a launch of a command in a container and output stdout/stderr to
 * console.
 *
 * @param id
 *            - id of caller to use to distinguish console owner
 * @param listener
 *            - optional listener of the run console
 * @param connectionUri
 *            - the specified connection to use
 * @param image
 *            - the image to use
 * @param cmdList
 *            - command to run as list of String
 * @param workingDir
 *            - working directory or null
 * @param additionalDirs
 *            - additional directories to mount or null
 * @param origEnv
 *            - original environment if we are appending to our existing
 *            environment
 * @param envMap
 *            - map of environment variable settings
 * @param ports
 *            - ports to expose
 * @param keep
 *            - keep container after running
 * @param stdinSupport
 *            - true if stdin support is required, false otherwise
 * @param privilegedMode
 *            - true if privileged mode is required, false otherwise
 * @param labels
 *            - Map of labels for the container
 * @param seccomp
 *            - seccomp profile
 * @since 4.0
 */
public void launch(String id, IContainerLaunchListener listener, final String connectionUri, String image, List<String> cmdList, String workingDir, List<String> additionalDirs, Map<String, String> origEnv, Map<String, String> envMap, List<String> ports, boolean keep, boolean stdinSupport, boolean privilegedMode, Map<String, String> labels, String seccomp) {
    // $NON-NLS-1$
    final String LAUNCH_TITLE = "ContainerLaunch.title";
    // $NON-NLS-1$
    final String LAUNCH_EXITED_TITLE = "ContainerLaunchExited.title";
    final List<String> env = new ArrayList<>();
    env.addAll(toList(origEnv));
    env.addAll(toList(envMap));
    final Set<String> exposedPorts = new HashSet<>();
    final Map<String, List<IDockerPortBinding>> portBindingsMap = new HashMap<>();
    if (ports != null) {
        for (String port : ports) {
            port = port.trim();
            if (port.length() > 0) {
                // $NON-NLS-1$
                String[] segments = port.split(":");
                if (segments.length == 1) {
                    // containerPort
                    exposedPorts.add(segments[0]);
                    portBindingsMap.put(segments[0], Arrays.asList((IDockerPortBinding) new DockerPortBinding("", // $NON-NLS-1$ //$NON-NLS-2$
                    "")));
                } else if (segments.length == 2) {
                    // hostPort:containerPort
                    exposedPorts.add(segments[1]);
                    portBindingsMap.put(segments[1], Arrays.asList((IDockerPortBinding) new DockerPortBinding("", // $NON-NLS-1$ //$NON-NLS-2$
                    segments[0])));
                } else if (segments.length == 3) {
                    // either
                    // ip:hostPort:containerPort
                    // or ip::containerPort
                    exposedPorts.add(segments[1]);
                    if (segments[1].isEmpty()) {
                        portBindingsMap.put(segments[2], Arrays.asList((IDockerPortBinding) new DockerPortBinding("", // $NON-NLS-1$ //$NON-NLS-2$
                        segments[0])));
                    } else {
                        portBindingsMap.put(segments[2], Arrays.asList((IDockerPortBinding) new DockerPortBinding(segments[0], // $NON-NLS-1$ //$NON-NLS-2$
                        segments[1])));
                    }
                }
            }
        }
    }
    // Note we only pass volumes to the config if we have a
    // remote daemon. Local mounted volumes are passed
    // via the HostConfig binds setting
    DockerContainerConfig.Builder builder = new DockerContainerConfig.Builder().openStdin(stdinSupport).cmd(cmdList).image(image).workingDir(workingDir);
    // option
    if (listener != null && listener.getClass().getName().equals("org.eclipse.cdt.internal.docker.launcher.ContainerLaunchConfigurationDelegate$StartGdbServerJob")) {
        builder = builder.tty(true);
    }
    // add any exposed ports as needed
    if (exposedPorts.size() > 0)
        builder = builder.exposedPorts(exposedPorts);
    // add any labels if specified
    if (labels != null)
        builder = builder.labels(labels);
    if (!DockerConnectionManager.getInstance().hasConnections()) {
        Display.getDefault().syncExec(() -> MessageDialog.openError(PlatformUI.getWorkbench().getActiveWorkbenchWindow().getShell(), DVMessages.getString(ERROR_LAUNCHING_CONTAINER), DVMessages.getString(ERROR_NO_CONNECTIONS)));
        return;
    }
    // Try and use the specified connection that was used before,
    // otherwise, open an error
    final IDockerConnection connection = DockerConnectionManager.getInstance().getConnectionByUri(connectionUri);
    if (connection == null) {
        Display.getDefault().syncExec(() -> MessageDialog.openError(PlatformUI.getWorkbench().getActiveWorkbenchWindow().getShell(), DVMessages.getString(ERROR_LAUNCHING_CONTAINER), DVMessages.getFormattedString(ERROR_NO_CONNECTION_WITH_URI, connectionUri)));
        return;
    }
    // if connection is not open, force it to be by fetching images
    if (!connection.isOpen()) {
        connection.getImages();
    }
    DockerHostConfig.Builder hostBuilder = new DockerHostConfig.Builder().privileged(privilegedMode);
    // ptrace with gdbserver
    if (seccomp != null) {
        hostBuilder.securityOpt(seccomp);
    }
    final Map<String, String> remoteVolumes = new HashMap<>();
    if (!((DockerConnection) connection).isLocal()) {
        @SuppressWarnings("rawtypes") final Map<String, Map> volumes = new HashMap<>();
        // the host data over before starting.
        if (additionalDirs != null) {
            for (String dir : additionalDirs) {
                remoteVolumes.put(dir, dir);
                volumes.put(dir, new HashMap<>());
            }
        }
        if (workingDir != null) {
            // $NON-NLS-1$
            remoteVolumes.put(workingDir, workingDir);
            volumes.put(workingDir, new HashMap<>());
        }
        builder = builder.volumes(volumes);
    } else {
        // Running daemon on local host.
        // Add mounts for any directories we need to run the executable.
        // When we add mount points, we need entries of the form:
        // hostname:mountname:Z.
        // In our case, we want all directories mounted as-is so the
        // executable will run as the user expects.
        final List<String> volumes = new ArrayList<>();
        if (additionalDirs != null) {
            for (String dir : additionalDirs) {
                // $NON-NLS-1$ //$NON-NLS-2$
                volumes.add(dir + ":" + dir + ":Z");
            }
        }
        if (workingDir != null) {
            // $NON-NLS-1$ //$NON-NLS-2$
            volumes.add(workingDir + ":" + workingDir + ":Z");
        }
        hostBuilder = hostBuilder.binds(volumes);
    }
    final DockerContainerConfig config = builder.build();
    // add any port bindings if specified
    if (portBindingsMap.size() > 0)
        hostBuilder = hostBuilder.portBindings(portBindingsMap);
    final IDockerHostConfig hostConfig = hostBuilder.build();
    final String imageName = image;
    final boolean keepContainer = keep;
    final String consoleId = id;
    final IContainerLaunchListener containerListener = listener;
    Thread t = new Thread(() -> {
        // create the container
        String containerId = null;
        try {
            containerId = ((DockerConnection) connection).createContainer(config, hostConfig, null);
            if (!((DockerConnection) connection).isLocal()) {
                // data over from the host.
                if (!remoteVolumes.isEmpty()) {
                    CopyVolumesJob job = new CopyVolumesJob(remoteVolumes, connection, containerId);
                    job.schedule();
                    job.join();
                    if (job.getResult() != Status.OK_STATUS)
                        return;
                }
            }
            if (config.tty()) {
                // We need tty support to handle issue with Docker daemon
                // not always outputting in time (e.g. we might get an
                // output line after the process has exited which can be
                // too late to show or it might get displayed in a wrong
                // order in relation to other output. We also want the
                // output to ultimately show up in the Console View.
                OutputStream stream = null;
                RunConsole oldConsole = getConsole();
                final RunConsole rc = RunConsole.findConsole(containerId, consoleId);
                setConsole(rc);
                rc.clearConsole();
                if (oldConsole != null)
                    RunConsole.removeConsole(oldConsole);
                Display.getDefault().syncExec(() -> rc.setTitle(Messages.getFormattedString(LAUNCH_TITLE, new String[] { cmdList.get(0), imageName })));
                if (rc != null) {
                    stream = rc.getOutputStream();
                }
                // We want terminal support, but we want to output to the
                // RunConsole.
                // To do this, we create a DockerConsoleOutputStream which
                // we
                // hook into the TM Terminal via stdout and stderr output
                // listeners.
                // These listeners will output to the
                // DockerConsoleOutputStream which
                // will in turn output to the RunConsole. See
                // DockerConnection.openTerminal().
                DockerConsoleOutputStream out = new DockerConsoleOutputStream(stream);
                RunConsole.attachToTerminal(connection, containerId, out);
                if (containerListener != null) {
                    out.addConsoleListener(new RunConsoleListenerBridge(containerListener));
                }
                ((DockerConnection) connection).startContainer(containerId, null, null);
                IDockerContainerInfo info = ((DockerConnection) connection).getContainerInfo(containerId);
                if (containerListener != null) {
                    containerListener.containerInfo(info);
                }
                // Wait for the container to finish
                final IDockerContainerExit status = ((DockerConnection) connection).waitForContainer(containerId);
                Display.getDefault().syncExec(() -> {
                    rc.setTitle(Messages.getFormattedString(LAUNCH_EXITED_TITLE, new String[] { status.statusCode().toString(), cmdList.get(0), imageName }));
                    rc.showConsole();
                    // We used a TM Terminal to receive the output of the
                    // session and
                    // then sent the output to the RunConsole. Remove the
                    // terminal
                    // tab that got created now that we are finished and all
                    // data is shown
                    // in Console View.
                    IWorkbenchPage page = PlatformUI.getWorkbench().getActiveWorkbenchWindow().getActivePage();
                    IViewPart terminalView = page.findView("org.eclipse.tm.terminal.view.ui.TerminalsView");
                    CTabFolder ctabfolder = terminalView.getAdapter(CTabFolder.class);
                    if (ctabfolder != null) {
                        CTabItem[] items = ctabfolder.getItems();
                        for (CTabItem item : items) {
                            if (item.getText().endsWith(info.name())) {
                                item.dispose();
                                break;
                            }
                        }
                    }
                });
                // finished
                if (containerListener != null)
                    containerListener.done();
                if (!keepContainer) {
                    ((DockerConnection) connection).removeContainer(containerId);
                }
            } else {
                OutputStream stream = null;
                RunConsole oldConsole = getConsole();
                final RunConsole rc = RunConsole.findConsole(containerId, consoleId);
                setConsole(rc);
                rc.clearConsole();
                if (oldConsole != null)
                    RunConsole.removeConsole(oldConsole);
                Display.getDefault().syncExec(() -> rc.setTitle(Messages.getFormattedString(LAUNCH_TITLE, new String[] { cmdList.get(0), imageName })));
                // if (!rc.isAttached()) {
                rc.attachToConsole(connection, containerId);
                // }
                if (rc != null) {
                    stream = rc.getOutputStream();
                    if (containerListener != null) {
                        ((ConsoleOutputStream) stream).addConsoleListener(containerListener);
                    }
                }
                // Create a unique logging thread id which has container id
                // and console id
                String loggingId = containerId + "." + consoleId;
                ((DockerConnection) connection).startContainer(containerId, loggingId, stream);
                if (rc != null)
                    rc.showConsole();
                if (containerListener != null) {
                    IDockerContainerInfo info = ((DockerConnection) connection).getContainerInfo(containerId);
                    containerListener.containerInfo(info);
                }
                // Wait for the container to finish
                final IDockerContainerExit status = ((DockerConnection) connection).waitForContainer(containerId);
                Display.getDefault().syncExec(() -> {
                    rc.setTitle(Messages.getFormattedString(LAUNCH_EXITED_TITLE, new String[] { status.statusCode().toString(), cmdList.get(0), imageName }));
                    rc.showConsole();
                });
                // finished
                if (containerListener != null)
                    containerListener.done();
                if (!keepContainer) {
                    // Drain the logging thread before we remove the
                    // container (we need to use the logging id)
                    Thread.sleep(1000);
                    ((DockerConnection) connection).stopLoggingThread(loggingId);
                    // Look for any Display Log console that the user may
                    // have opened which would be
                    // separate and make sure it is removed as well
                    RunConsole rc2 = RunConsole.findConsole(((DockerConnection) connection).getContainer(containerId));
                    if (rc2 != null)
                        RunConsole.removeConsole(rc2);
                    ((DockerConnection) connection).removeContainer(containerId);
                }
            }
        } catch (final DockerException e2) {
            // error in creation, try and remove Container if possible
            if (!keepContainer && containerId != null) {
                try {
                    ((DockerConnection) connection).removeContainer(containerId);
                } catch (DockerException | InterruptedException e1) {
                // ignore exception
                }
            }
            Display.getDefault().syncExec(() -> MessageDialog.openError(PlatformUI.getWorkbench().getActiveWorkbenchWindow().getShell(), DVMessages.getFormattedString(ERROR_CREATING_CONTAINER, imageName), e2.getMessage()));
        } catch (InterruptedException e3) {
        // for now
        // do nothing
        }
        ((DockerConnection) connection).getContainers(true);
    });
    t.start();
}

Example 38 with IDockerConnection

use of org.eclipse.linuxtools.docker.core.IDockerConnection in project linuxtools by eclipse.

the class ContainerLauncher method fetchContainerDirsSync.

/**
 * Fetch directories from Container and place them in a specified location.
 * This method will wait for copy job to complete before returning.
 *
 * @param connectionUri
 *            - uri of connection to use
 * @param imageName
 *            - name of image to use
 * @param containerDirs
 *            - list of directories to copy
 * @param hostDir
 *            - host directory to copy directories to
 * @return 0 if successful, -1 if failure occurred
 *
 * @since 4.0
 */
public int fetchContainerDirsSync(String connectionUri, String imageName, List<String> containerDirs, List<String> excludedDirs, IPath hostDir) {
    // Try and use the specified connection that was used before,
    // otherwise, open an error
    final IDockerConnection connection = DockerConnectionManager.getInstance().getConnectionByUri(connectionUri);
    if (connection == null) {
        Display.getDefault().syncExec(() -> MessageDialog.openError(PlatformUI.getWorkbench().getActiveWorkbenchWindow().getShell(), DVMessages.getString(ERROR_LAUNCHING_CONTAINER), DVMessages.getFormattedString(ERROR_NO_CONNECTION_WITH_URI, connectionUri)));
        return -1;
    }
    CopyVolumesFromImageJob job = new CopyVolumesFromImageJob(connection, imageName, containerDirs, excludedDirs, hostDir);
    job.schedule();
    try {
        job.join();
    } catch (InterruptedException e) {
        return -1;
    }
    return 0;
}

Example 39 with IDockerConnection

use of org.eclipse.linuxtools.docker.core.IDockerConnection in project linuxtools by eclipse.

the class BaseContainersCommandHandler method execute.

@Override
public Object execute(ExecutionEvent event) {
    final IWorkbenchPart activePart = HandlerUtil.getActivePart(event);
    final List<IDockerContainer> selectedContainers = getSelectedContainers(activePart);
    final IDockerConnection connection = getCurrentConnection(activePart);
    if (connection == null || selectedContainers.isEmpty()) {
        return null;
    }
    final Job job = new Job(getJobName(selectedContainers)) {

        @Override
        protected IStatus run(final IProgressMonitor monitor) {
            if (confirmed(selectedContainers)) {
                monitor.beginTask(getJobName(selectedContainers), selectedContainers.size());
                for (final IDockerContainer container : selectedContainers) {
                    monitor.setTaskName(getTaskName(container));
                    executeInJob(container, connection);
                    monitor.worked(1);
                }
            }
            monitor.done();
            return Status.OK_STATUS;
        }
    };
    // job.setPriority(Job.LONG);
    job.setUser(true);
    job.schedule();
    return null;
}

Example 40 with IDockerConnection

use of org.eclipse.linuxtools.docker.core.IDockerConnection in project linuxtools by eclipse.

the class BuildImageCommandHandler method execute.

@Override
public Object execute(final ExecutionEvent event) {
    final ImageBuild wizard = new ImageBuild();
    final WizardDialog wizardDialog = new NonModalWizardDialog(HandlerUtil.getActiveShell(event), wizard);
    wizardDialog.create();
    IWorkbenchWindow window = PlatformUI.getWorkbench().getActiveWorkbenchWindow();
    IWorkbenchPage activePage = null;
    IWorkbenchPart activePart = null;
    if (window != null)
        activePage = window.getActivePage();
    if (activePage != null)
        activePart = activePage.getActivePart();
    IDockerConnection connection = CommandUtils.getCurrentConnection(activePart);
    // connections
    if (connection == null) {
        connection = DockerConnectionManager.getInstance().getFirstConnection();
    }
    if (connection == null || !connection.isOpen()) {
        // if no active connection, issue error message dialog and return
        Display.getDefault().syncExec(() -> MessageDialog.openError(PlatformUI.getWorkbench().getActiveWorkbenchWindow().getShell(), // $NON-NLS-1$
        WizardMessages.getString("ErrorNoActiveConnection.msg"), // $NON-NLS-1$
        WizardMessages.getString("ErrorNoActiveConnection.desc")));
        return null;
    }
    final boolean buildImage = wizardDialog.open() == Window.OK;
    if (buildImage) {
        performBuildImage(wizard, connection);
    }
    return null;
}