Examples with Element org.omegat.filters3.Element used on opensource projects

Example 76 with Element

use of org.omegat.filters3.Element in project JMRI by JMRI.

the class PaneProgPaneTest method testPaneWrite.

@Test
public void testPaneWrite() {
    Assume.assumeFalse(GraphicsEnvironment.isHeadless());
    log.debug("testPaneWrite starts");
    // initialize the system
    // make sure XML document is ready
    setupDoc();
    PaneProgFrame pFrame = new PaneProgFrame(null, new RosterEntry(), "test frame", "programmers/Basic.xml", p, false) {

        // dummy implementations
        @Override
        protected JPanel getModePane() {
            return null;
        }
    };
    CvTableModel cvModel = new CvTableModel(new JLabel(), p);
    IndexedCvTableModel icvModel = new IndexedCvTableModel(new JLabel(), p);
    String[] args = { "CV", "Name" };
    VariableTableModel varModel = new VariableTableModel(null, args, cvModel, icvModel);
    log.debug("VariableTableModel ctor complete");
    // have to add a couple of defined variables
    Element el0 = new Element("variable").setAttribute("CV", "2").setAttribute("readOnly", "no").setAttribute("mask", "VVVVVVVV").setAttribute("default", "20").setAttribute("label", "Start voltage").addContent(new Element("decVal"));
    Element el1 = new Element("variable").setAttribute("CV", "3").setAttribute("readOnly", "no").setAttribute("mask", "VVVVVVVV").setAttribute("default", "30").setAttribute("label", "Primary Address").addContent(new Element("decVal"));
    varModel.setRow(0, el0);
    varModel.setRow(1, el1);
    log.debug("Two elements loaded");
    //        PaneProgPane progPane = new PaneProgPane("name", pane1, cvModel, varModel, null);
    PaneProgPane progPane = new PaneProgPane(pFrame, "name", pane1, cvModel, icvModel, varModel, null, null);
    p.resetCv(2, -1);
    p.resetCv(3, -1);
    // test by invoking
    progPane.writeAllButton.setSelected(true);
    // wait for reply (normally, done by callback; will check that later)
    JUnitUtil.waitFor(() -> {
        return !progPane.isBusy();
    }, "progPane.isBusy");
    Assert.assertEquals("CV 2 value ", 20, p.getCvVal(2));
    Assert.assertEquals("CV 3 value ", 30, p.getCvVal(3));
    log.debug("testPaneWrite ends ok");
}

Example 77 with Element

use of org.omegat.filters3.Element in project JMRI by JMRI.

the class PaneProgPaneTest method testPaneReadOpCount.

// test counting of read operations needed
@Test
public void testPaneReadOpCount() {
    Assume.assumeFalse(GraphicsEnvironment.isHeadless());
    log.debug("testPaneReadOpCount starts");
    // initialize the system
    // make sure XML document is ready
    setupDoc();
    PaneProgFrame pFrame = new PaneProgFrame(null, new RosterEntry(), "test frame", "programmers/Basic.xml", p, false) {

        // dummy implementations
        @Override
        protected JPanel getModePane() {
            return null;
        }
    };
    CvTableModel cvModel = new CvTableModel(new JLabel(), p);
    IndexedCvTableModel icvModel = new IndexedCvTableModel(new JLabel(), p);
    String[] args = { "CV", "Name" };
    VariableTableModel varModel = new VariableTableModel(null, args, cvModel, icvModel);
    // have to add a couple of defined variables
    int row = 0;
    // note these +have+ to be on this pane, e.g. named in setupDoc
    Element el0 = new Element("variable").setAttribute("CV", "1").setAttribute("readOnly", "no").setAttribute("mask", "VVVVVVVV").setAttribute("label", "Start voltage").addContent(new Element("decVal"));
    varModel.setRow(row++, el0);
    Element el1 = new Element("variable").setAttribute("CV", "1").setAttribute("readOnly", "no").setAttribute("mask", "VVVVVVVV").setAttribute("label", "Primary Address").addContent(new Element("decVal"));
    varModel.setRow(row++, el1);
    Element el2 = new Element("variable").setAttribute("CV", "67").setAttribute("label", "Normal direction of motion").setAttribute("readOnly", "no").setAttribute("mask", "VVVVVVVV").addContent(new Element("speedTableVal"));
    varModel.setRow(row++, el2);
    Element el3 = new Element("variable").setAttribute("CV", "68").setAttribute("readOnly", "no").setAttribute("mask", "VVVVVVVV").setAttribute("label", "Address").addContent(new Element("decVal"));
    varModel.setRow(row++, el3);
    PaneProgPane progPane = new PaneProgPane(pFrame, "name", pane1, cvModel, icvModel, varModel, null, null);
    // start actual testing
    Assert.assertEquals("number of all CVs to read ", 29, progPane.countOpsNeeded(true, false));
    Assert.assertEquals("number of all CVs to write ", 29, progPane.countOpsNeeded(false, false));
    Assert.assertEquals("number of changed CVs to read ", 0, progPane.countOpsNeeded(true, true));
    Assert.assertEquals("number of changed CVs to write ", 0, progPane.countOpsNeeded(false, true));
    // mark some as needing to be written
    (cvModel.allCvMap().get("1")).setValue(12);
    Assert.assertEquals("modified all CVs to read ", 29, progPane.countOpsNeeded(true, false));
    Assert.assertEquals("modified all CVs to write ", 29, progPane.countOpsNeeded(false, false));
    Assert.assertEquals("modified changed CVs to read ", 1, progPane.countOpsNeeded(true, true));
    Assert.assertEquals("modified changed CVs to write ", 1, progPane.countOpsNeeded(false, true));
    (cvModel.allCvMap().get("69")).setValue(12);
    // careful - might change more than one CV!
    Assert.assertEquals("spdtbl all CVs to read ", 29, progPane.countOpsNeeded(true, false));
    Assert.assertEquals("spdtbl all CVs to write ", 29, progPane.countOpsNeeded(false, false));
    Assert.assertEquals("spdtbl changed CVs to read ", 2, progPane.countOpsNeeded(true, true));
    Assert.assertEquals("spdtbl changed CVs to write ", 2, progPane.countOpsNeeded(false, true));
    log.debug("testPaneReadOpCount ends ok");
}

Example 78 with Element

use of org.omegat.filters3.Element in project JMRI by JMRI.

the class PaneProgPaneTest method testColumn.

// test creating columns in a pane
@Test
public void testColumn() {
    Assume.assumeFalse(GraphicsEnvironment.isHeadless());
    setupDoc();
    PaneProgFrame pFrame = new PaneProgFrame(null, new RosterEntry(), "test frame", "programmers/Basic.xml", p, false) {

        // dummy implementations
        @Override
        protected JPanel getModePane() {
            return null;
        }
    };
    CvTableModel cvModel = new CvTableModel(new JLabel(), p);
    IndexedCvTableModel icvModel = new IndexedCvTableModel(new JLabel(), p);
    log.debug("CvTableModel ctor complete");
    String[] args = { "CV", "Name" };
    VariableTableModel varModel = new VariableTableModel(null, args, cvModel, icvModel);
    log.debug("VariableTableModel ctor complete");
    // create test object with special implementation of the newColumn(String) operation
    colCount = 0;
    PaneProgPane pane = new PaneProgPane(pFrame, "name", pane1, cvModel, icvModel, varModel, null, null) {

        @Override
        public JPanel newColumn(Element e, boolean a, Element el) {
            colCount++;
            return new JPanel();
        }
    };
    assertNotNull("exists", pane);
    assertEquals("column count", 2, colCount);
}

Example 79 with Element

use of org.omegat.filters3.Element in project JMRI by JMRI.

the class VariableTableModelTest method testVarEnumVar.

// Check creating an enumvar with various groupings
public void testVarEnumVar() {
    String[] args = { "CV", "Name" };
    VariableTableModel t = new VariableTableModel(null, args, new CvTableModel(null, p), null);
    // create a JDOM tree with just some elements
    Element root = new Element("decoder-config");
    Document doc = new Document(root);
    doc.setDocType(new DocType("decoder-config", "decoder-config.dtd"));
    // add some elements
    Element el0;
    root.addContent(// the sites information here lists all relevant
    new Element("decoder").addContent(new Element("variables").addContent(el0 = new Element("variable").setAttribute("CV", "99").setAttribute("label", "Enum Sample").setAttribute("mask", "VVVVVVVV").setAttribute("readOnly", "").addContent(new Element("enumVal").addContent(new Element("enumChoice").setAttribute("choice", "V0")).addContent(new Element("enumChoice").setAttribute("choice", "V1")).addContent(new Element("enumChoiceGroup").addContent(new Element("enumChoice").setAttribute("choice", "V2")).addContent(new Element("enumChoice").setAttribute("choice", "V3"))).addContent(new Element("enumChoice").setAttribute("choice", "V4"))))));
    // end of adding contents
    // and test reading this
    t.setRow(0, el0);
    // check
    Assert.assertEquals("name of variable 1", "Enum Sample", t.getLabel(0));
    EnumVariableValue ev = (EnumVariableValue) t.getVariable(t.findVarIndex("Enum Sample"));
    ev.setValue(1);
    Assert.assertEquals("value 1", "V1", ev.getTextValue());
    ev.setValue(2);
    Assert.assertEquals("value 2", "V2", ev.getTextValue());
    ev.setValue(3);
    Assert.assertEquals("value 3", "V3", ev.getTextValue());
    ev.setValue(4);
    Assert.assertEquals("value 4", "V4", ev.getTextValue());
}

Example 80 with Element

use of org.omegat.filters3.Element in project JMRI by JMRI.

the class VariableTableModelTest method testVarTableLoadFileComplex.

// Check can read complex file
public void testVarTableLoadFileComplex() throws Exception {
    String[] args = { "CV", "Name" };
    VariableTableModel t = new VariableTableModel(null, args, new CvTableModel(null, p), null);
    // create a JDOM tree from file
    XmlFile file = new XmlFile() {
    };
    Element root = file.rootFromName("xml/decoders//QSI_ver9.xml");
    // add the contents
    Element el0 = root.getChild("decoder").getChild("variables");
    int i = 0;
    for (Element v : el0.getChildren("variable")) {
        t.setRow(i++, v);
    }
// fault is failure to reach the end, e.g. throw message or exception
}