Examples with VlanId org.onlab.packet.VlanId used on opensource projects

Example 16 with VlanId

use of org.onlab.packet.VlanId in project trellis-control by opennetworkinglab.

the class RouteHandler method processHostMovedEvent.

void processHostMovedEvent(HostEvent event) {
    log.info("processHostMovedEvent {}", event);
    MacAddress hostMac = event.subject().mac();
    VlanId hostVlanId = event.subject().vlan();
    Set<ConnectPoint> prevLocations = event.prevSubject().locations().stream().map(h -> (ConnectPoint) h).collect(Collectors.toSet());
    Set<ConnectPoint> newLocations = event.subject().locations().stream().map(h -> (ConnectPoint) h).collect(Collectors.toSet());
    List<Set<IpPrefix>> batchedSubnets = srManager.deviceConfiguration.getBatchedSubnets(event.subject().id());
    Set<DeviceId> newDeviceIds = newLocations.stream().map(ConnectPoint::deviceId).collect(Collectors.toSet());
    // Set of deviceIDs of the previous locations where the host was connected
    // Used to determine if host moved to different connect points
    // on same device or moved to a different device altogether
    Set<DeviceId> oldDeviceIds = prevLocations.stream().map(ConnectPoint::deviceId).collect(Collectors.toSet());
    // and only when the no. of routes with the host as next-hop is not zero
    if (!batchedSubnets.isEmpty()) {
        // For each new location, if NextObj exists for the host, update with new location ..
        Sets.difference(newLocations, prevLocations).forEach(newLocation -> {
            // NOTE: that we use the nexthop vlanId to retrieve the nextId
            // while the vlanId used to program the L3 unicast chain
            // is derived from the port configuration. In case of
            // a tagged interface we use host vlanId. Host vlan should
            // be part of the tags configured for that port. See the
            // code in DefaultGroupHandler.updateL3UcastGroupBucket
            int nextId = srManager.getMacVlanNextObjectiveId(newLocation.deviceId(), hostMac, hostVlanId, null, false);
            if (nextId != -1) {
                // Update the nextId group bucket
                log.debug("HostMoved. NextId exists, update L3 Ucast Group Bucket {}, {}, {} --> {}", newLocation, hostMac, hostVlanId, nextId);
                srManager.updateMacVlanTreatment(newLocation.deviceId(), hostMac, hostVlanId, newLocation.port(), nextId);
            } else {
                log.debug("HostMoved. NextId does not exist for this location {}, host {}/{}", newLocation, hostMac, hostVlanId);
            }
        });
    }
    batchedSubnets.forEach(subnets -> {
        log.debug("HostMoved. populateSubnet {}, {}", newLocations, subnets);
        srManager.defaultRoutingHandler.populateSubnet(newLocations, subnets);
        subnets.forEach(prefix -> {
            // For each old location
            Sets.difference(prevLocations, newLocations).forEach(prevLocation -> {
                // Otherwise, do not remove and let the adding part update the old flow
                if (newDeviceIds.contains(prevLocation.deviceId())) {
                    return;
                }
                log.debug("HostMoved. removeSubnet {}, {}", prevLocation, prefix);
                srManager.deviceConfiguration.removeSubnet(prevLocation, prefix);
                // Do not remove flow from a device if the route is still reachable via its pair device.
                // If spine exists,
                // populateSubnet above will update the flow to point to its pair device via spine.
                // If spine does not exist,
                // processSingleLeafPair below will update the flow to point to its pair device via pair port.
                DeviceId pairDeviceId = srManager.getPairDeviceId(prevLocation.deviceId()).orElse(null);
                if (newLocations.stream().anyMatch(n -> n.deviceId().equals(pairDeviceId))) {
                    return;
                }
                log.debug("HostMoved. revokeRoute {}, {}, {}, {}", prevLocation, prefix, hostMac, hostVlanId);
                srManager.defaultRoutingHandler.revokeRoute(prevLocation.deviceId(), prefix, hostMac, hostVlanId, prevLocation.port(), false);
            });
            // For each new location, add all new IPs.
            Sets.difference(newLocations, prevLocations).forEach(newLocation -> {
                log.debug("HostMoved. addSubnet {}, {}", newLocation, prefix);
                srManager.deviceConfiguration.addSubnet(newLocation, prefix);
                // its a new connect point, not a move from an existing device, populateRoute
                if (!oldDeviceIds.contains(newLocation.deviceId())) {
                    log.debug("HostMoved. populateRoute {}, {}, {}, {}", newLocation, prefix, hostMac, hostVlanId);
                    srManager.defaultRoutingHandler.populateRoute(newLocation.deviceId(), prefix, hostMac, hostVlanId, newLocation.port(), false);
                }
            });
            newLocations.forEach(location -> {
                processSingleLeafPairIfNeeded(newLocations, location, prefix, hostVlanId);
            });
        });
    });
}

Example 17 with VlanId

use of org.onlab.packet.VlanId in project trellis-control by opennetworkinglab.

the class RouteHandler method processSingleLeafPairIfNeeded.

protected boolean processSingleLeafPairIfNeeded(Set<ConnectPoint> locations, ConnectPoint location, IpPrefix prefix, VlanId nextHopVlan) {
    // Special handling for single leaf pair
    if (!srManager.getInfraDeviceIds().isEmpty()) {
        log.debug("Spine found. Skip single leaf pair handling");
        return false;
    }
    Optional<DeviceId> pairDeviceId = srManager.getPairDeviceId(location.deviceId());
    if (pairDeviceId.isEmpty()) {
        log.debug("Pair device of {} not found", location.deviceId());
        return false;
    }
    if (locations.stream().anyMatch(l -> l.deviceId().equals(pairDeviceId.get()))) {
        log.debug("Pair device has a next hop available. Leave it as is.");
        return false;
    }
    Optional<PortNumber> pairRemotePort = srManager.getPairLocalPort(pairDeviceId.get());
    if (pairRemotePort.isEmpty()) {
        log.debug("Pair remote port of {} not found", pairDeviceId.get());
        return false;
    }
    // Use routerMac of the pair device as the next hop
    MacAddress effectiveMac;
    try {
        effectiveMac = srManager.getDeviceMacAddress(location.deviceId());
    } catch (DeviceConfigNotFoundException e) {
        log.warn("Abort populateRoute on pair device {}. routerMac not found", pairDeviceId);
        return false;
    }
    // Since the pairLocalPort is trunk port, use assigned vlan of original port
    // when the host is untagged
    VlanId effectiveVlan = Optional.ofNullable(srManager.getInternalVlanId(location)).orElse(nextHopVlan);
    log.debug("Single leaf pair. populateRoute {}/{}, {}, {}, {}", pairDeviceId, pairRemotePort, prefix, effectiveMac, effectiveVlan);
    srManager.defaultRoutingHandler.populateRoute(pairDeviceId.get(), prefix, effectiveMac, effectiveVlan, pairRemotePort.get(), false);
    return true;
}

Example 18 with VlanId

use of org.onlab.packet.VlanId in project trellis-control by opennetworkinglab.

the class RouteHandler method processRouteAddedInternal.

/**
 * Internal logic that handles route addition.
 *
 * @param routes collection of routes to be processed
 * @param populateRouteOnly true if we only want to populateRoute but not populateSubnet.
 *                          Set it to true when initializing a device coming up.
 *                          populateSubnet will be done when link comes up later so it is redundant.
 *                          populateRoute still needs to be done for statically configured next hop hosts.
 */
private void processRouteAddedInternal(Collection<ResolvedRoute> routes, boolean populateRouteOnly) {
    if (!isReady()) {
        log.info("System is not ready. Skip adding route for {}", routes);
        return;
    }
    log.info("processRouteAddedInternal. routes={}", routes);
    if (routes.size() > 2) {
        log.info("Route {} has more than two next hops. Do not process route change", routes);
        return;
    }
    if (routes.isEmpty()) {
        log.warn("No resolved route found. Abort processRouteAddedInternal");
        return;
    }
    Set<ConnectPoint> allLocations = Sets.newHashSet();
    Set<IpPrefix> allPrefixes = Sets.newHashSet();
    routes.forEach(route -> {
        allLocations.addAll(srManager.nextHopLocations(route));
        allPrefixes.add(route.prefix());
    });
    log.debug("RouteAdded. populateSubnet {}, {}", allLocations, allPrefixes);
    srManager.defaultRoutingHandler.populateSubnet(allLocations, allPrefixes);
    routes.forEach(route -> {
        IpPrefix prefix = route.prefix();
        MacAddress nextHopMac = route.nextHopMac();
        VlanId nextHopVlan = route.nextHopVlan();
        Set<ConnectPoint> locations = srManager.nextHopLocations(route);
        locations.forEach(location -> {
            log.debug("RouteAdded. addSubnet {}, {}", location, prefix);
            srManager.deviceConfiguration.addSubnet(location, prefix);
            log.debug("RouteAdded populateRoute {}, {}, {}, {}", location, prefix, nextHopMac, nextHopVlan);
            srManager.defaultRoutingHandler.populateRoute(location.deviceId(), prefix, nextHopMac, nextHopVlan, location.port(), false);
            processSingleLeafPairIfNeeded(locations, location, prefix, nextHopVlan);
        });
    });
}

Example 19 with VlanId

use of org.onlab.packet.VlanId in project trellis-control by opennetworkinglab.

the class XconnectAddCommand method doExecute.

@Override
protected void doExecute() {
    DeviceId deviceId = DeviceId.deviceId(deviceIdStr);
    VlanId vlanId = VlanId.vlanId(vlanIdStr);
    XconnectEndpoint ep1 = XconnectEndpoint.fromString(ep1Str);
    XconnectEndpoint ep2 = XconnectEndpoint.fromString(ep2Str);
    Set<XconnectEndpoint> endpoints = Sets.newHashSet(ep1, ep2);
    XconnectService xconnectService = get(XconnectService.class);
    xconnectService.addOrUpdateXconnect(deviceId, vlanId, endpoints);
}

Example 20 with VlanId

use of org.onlab.packet.VlanId in project trellis-control by opennetworkinglab.

the class XconnectRemoveCommand method doExecute.

@Override
protected void doExecute() {
    DeviceId deviceId = DeviceId.deviceId(deviceIdStr);
    VlanId vlanId = VlanId.vlanId(vlanIdStr);
    XconnectService xconnectService = get(XconnectService.class);
    xconnectService.removeXonnect(deviceId, vlanId);
}