use of org.onosproject.net.intent.FlowRuleIntent in project onos by opennetworkinglab.
the class LinkCollectionOptimizationTest method testVlanOrder.
/**
* We test the proper optimization of sp2mp with VLAN
* ingress point and different egress points: 1) it is
* a simple ingress point; 2) it is a vlan ingress point;
* 3) It is a simple ingress point. 1) and 2) share the same
* egress switch. The outcomes of the test are the re-ordering
* of the actions and the proper optimization of the chain.
*/
@Test
public void testVlanOrder() {
intent = LinkCollectionIntent.builder().appId(APP_ID).selector(selector).treatment(treatment).links(linksForSp2Mp).applyTreatmentOnEgress(true).filteredIngressPoints(ImmutableSet.of(new FilteredConnectPoint(d3p10, vlan100Selector))).filteredEgressPoints(ImmutableSet.of(new FilteredConnectPoint(d1p10), new FilteredConnectPoint(d1p11, vlan200Selector), new FilteredConnectPoint(d2p10))).build();
sut.activate();
List<Intent> compiled = sut.compile(intent, Collections.emptyList());
assertThat(compiled, hasSize(1));
Collection<FlowRule> rules = ((FlowRuleIntent) compiled.get(0)).flowRules();
assertThat(rules, hasSize(3));
Collection<FlowRule> rulesS3 = rules.stream().filter(rule -> rule.deviceId().equals(d3p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS3, hasSize(1));
FlowRule ruleS3 = rulesS3.iterator().next();
assertThat(ruleS3.selector(), is(DefaultTrafficSelector.builder(vlan100Selector).matchInPort(d3p10.port()).build()));
assertThat(ruleS3.treatment(), is(DefaultTrafficTreatment.builder().setOutput(d3p0.port()).build()));
Collection<FlowRule> rulesS2 = rules.stream().filter(rule -> rule.deviceId().equals(d2p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS2, hasSize(1));
FlowRule ruleS2 = rulesS2.iterator().next();
assertThat(ruleS2.selector(), is(DefaultTrafficSelector.builder(vlan100Selector).matchInPort(d2p1.port()).build()));
assertThat(ruleS2.treatment(), is(DefaultTrafficTreatment.builder().setOutput(d2p0.port()).popVlan().setOutput(d2p10.port()).build()));
Collection<FlowRule> rulesS1 = rules.stream().filter(rule -> rule.deviceId().equals(d1p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS1, hasSize(1));
FlowRule ruleS1 = rulesS1.iterator().next();
assertThat(ruleS1.selector(), is(DefaultTrafficSelector.builder(vlan100Selector).matchInPort(d1p0.port()).build()));
assertThat(ruleS1.treatment(), is(DefaultTrafficTreatment.builder().setVlanId(((VlanIdCriterion) vlan200Selector.getCriterion(VLAN_VID)).vlanId()).setOutput(d1p11.port()).popVlan().setOutput(d1p10.port()).build()));
sut.deactivate();
}
use of org.onosproject.net.intent.FlowRuleIntent in project onos by opennetworkinglab.
the class LinkCollectionOptimizationTest method testUntaggedOrder.
/**
* We test the proper optimization of sp2mp with untagged
* ingress point and different egress points: 1) it is
* a vlan ingress point; 2) it is a mpls ingress point;
* 3) It is a simple ingress point. 1) and 2) share the same
* egress switch. The outcomes of the test are the re-ordering
* of the actions and the proper optimization of the chain.
*/
@Test
public void testUntaggedOrder() {
intent = LinkCollectionIntent.builder().appId(APP_ID).selector(selector).treatment(treatment).links(linksForSp2Mp).applyTreatmentOnEgress(true).filteredIngressPoints(ImmutableSet.of(new FilteredConnectPoint(d3p10))).filteredEgressPoints(ImmutableSet.of(new FilteredConnectPoint(d1p10, vlan100Selector), new FilteredConnectPoint(d1p11, mpls200Selector), new FilteredConnectPoint(d1p12), new FilteredConnectPoint(d2p10))).build();
sut.activate();
List<Intent> compiled = sut.compile(intent, Collections.emptyList());
assertThat(compiled, hasSize(1));
Collection<FlowRule> rules = ((FlowRuleIntent) compiled.get(0)).flowRules();
assertThat(rules, hasSize(3));
Collection<FlowRule> rulesS3 = rules.stream().filter(rule -> rule.deviceId().equals(d3p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS3, hasSize(1));
FlowRule ruleS3 = rulesS3.iterator().next();
assertThat(ruleS3.selector(), is(DefaultTrafficSelector.builder().matchInPort(d3p10.port()).build()));
assertThat(ruleS3.treatment(), is(DefaultTrafficTreatment.builder().setOutput(d3p0.port()).build()));
Collection<FlowRule> rulesS2 = rules.stream().filter(rule -> rule.deviceId().equals(d2p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS2, hasSize(1));
FlowRule ruleS2 = rulesS2.iterator().next();
assertThat(ruleS2.selector(), is(DefaultTrafficSelector.builder().matchInPort(d2p1.port()).build()));
assertThat(ruleS2.treatment(), is(DefaultTrafficTreatment.builder().setOutput(d2p0.port()).setOutput(d2p10.port()).build()));
Collection<FlowRule> rulesS1 = rules.stream().filter(rule -> rule.deviceId().equals(d1p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS1, hasSize(1));
FlowRule ruleS1 = rulesS1.iterator().next();
assertThat(ruleS1.selector(), is(DefaultTrafficSelector.builder().matchInPort(d1p0.port()).build()));
assertThat(ruleS1.treatment(), is(DefaultTrafficTreatment.builder().setOutput(d1p12.port()).pushVlan().setVlanId(((VlanIdCriterion) vlan100Selector.getCriterion(VLAN_VID)).vlanId()).setOutput(d1p10.port()).popVlan().pushMpls().copyTtlOut().setMpls(((MplsCriterion) mpls200Selector.getCriterion(MPLS_LABEL)).label()).setOutput(d1p11.port()).build()));
sut.deactivate();
}
use of org.onosproject.net.intent.FlowRuleIntent in project onos by opennetworkinglab.
the class LinkCollectionOptimizationTest method testOptimizationMplsEncapTrivialSelectors.
/**
* We test the proper optimization of sp2mp with the VLAN
* encapsulation and trivial selector.
*/
@Test
public void testOptimizationMplsEncapTrivialSelectors() {
intent = LinkCollectionIntent.builder().appId(APP_ID).selector(selector).treatment(treatment).constraints(constraintsForMPLS).links(linksForSp2Mp).filteredIngressPoints(ImmutableSet.of(new FilteredConnectPoint(d3p10))).filteredEgressPoints(ImmutableSet.of(new FilteredConnectPoint(d1p10), new FilteredConnectPoint(d1p11), new FilteredConnectPoint(d2p10))).build();
sut.activate();
/*
* We use the FIRST_FIT to simplify tests.
*/
LinkCollectionCompiler.labelAllocator.setLabelSelection(LABEL_SELECTION);
List<Intent> compiled = sut.compile(intent, Collections.emptyList());
assertThat(compiled, hasSize(1));
Collection<FlowRule> rules = ((FlowRuleIntent) compiled.get(0)).flowRules();
assertThat(rules, hasSize(3));
Collection<FlowRule> rulesS3 = rules.stream().filter(rule -> rule.deviceId().equals(d3p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS3, hasSize(1));
FlowRule ruleS3 = rulesS3.iterator().next();
assertThat(ruleS3.selector(), is(DefaultTrafficSelector.builder().matchInPort(d3p10.port()).build()));
assertThat(ruleS3.treatment(), is(DefaultTrafficTreatment.builder().pushMpls().copyTtlOut().setMpls(MplsLabel.mplsLabel(LABEL)).setOutput(d3p0.port()).build()));
Collection<FlowRule> rulesS2 = rules.stream().filter(rule -> rule.deviceId().equals(d2p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS2, hasSize(1));
FlowRule ruleS2 = rulesS2.iterator().next();
assertThat(ruleS2.selector(), is(DefaultTrafficSelector.builder().matchInPort(d2p1.port()).matchMplsLabel(MplsLabel.mplsLabel((LABEL))).matchEthType(Ethernet.MPLS_UNICAST).build()));
assertThat(ruleS2.treatment(), is(DefaultTrafficTreatment.builder().setMpls(MplsLabel.mplsLabel(LABEL)).setOutput(d2p0.port()).copyTtlIn().popMpls(IPV4.ethType()).setOutput(d2p10.port()).build()));
Collection<FlowRule> rulesS1 = rules.stream().filter(rule -> rule.deviceId().equals(d1p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS1, hasSize(1));
FlowRule ruleS1 = rulesS1.iterator().next();
assertThat(ruleS1.selector(), is(DefaultTrafficSelector.builder().matchInPort(d1p0.port()).matchMplsLabel(MplsLabel.mplsLabel((LABEL))).matchEthType(Ethernet.MPLS_UNICAST).build()));
assertThat(ruleS1.treatment(), is(DefaultTrafficTreatment.builder().copyTtlIn().popMpls(IPV4.ethType()).setOutput(d1p10.port()).setOutput(d1p11.port()).build()));
sut.deactivate();
}
use of org.onosproject.net.intent.FlowRuleIntent in project onos by opennetworkinglab.
the class LinkCollectionOptimizationTest method testPoPVlanOptimization.
/**
* We test the proper optimization of sp2mp with VLAN ingress point,
* simple egress point, non trivial intent treatment and non trivial
* intent selector. The outcomes of the test are the proper optimization
* of the actions. It is expected that the actions related to the intent
* treatment and intent selector are not optimized. The optimization is
* performed only on the dec ttl actions and on the actions which create
* traffic slices. The rationale is that in the intent treatment we expect
* actions like set something so it is fine to perform them several times.
*/
@Test
public void testPoPVlanOptimization() {
intent = LinkCollectionIntent.builder().appId(APP_ID).selector(ipPrefixSelector).treatment(ethDstTreatment).links(linksForSp2Mp).applyTreatmentOnEgress(true).filteredIngressPoints(ImmutableSet.of(new FilteredConnectPoint(d3p10, vlan100Selector))).filteredEgressPoints(ImmutableSet.of(new FilteredConnectPoint(d1p10), new FilteredConnectPoint(d1p11), new FilteredConnectPoint(d1p12), new FilteredConnectPoint(d2p10))).build();
sut.activate();
List<Intent> compiled = sut.compile(intent, Collections.emptyList());
assertThat(compiled, hasSize(1));
Collection<FlowRule> rules = ((FlowRuleIntent) compiled.get(0)).flowRules();
assertThat(rules, hasSize(3));
Collection<FlowRule> rulesS3 = rules.stream().filter(rule -> rule.deviceId().equals(d3p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS3, hasSize(1));
FlowRule ruleS3 = rulesS3.iterator().next();
assertThat(ruleS3.selector(), is(DefaultTrafficSelector.builder(ipPrefixSelector).matchVlanId(((VlanIdCriterion) vlan100Selector.getCriterion(VLAN_VID)).vlanId()).matchInPort(d3p10.port()).build()));
assertThat(ruleS3.treatment(), is(DefaultTrafficTreatment.builder().setOutput(d3p0.port()).build()));
Collection<FlowRule> rulesS2 = rules.stream().filter(rule -> rule.deviceId().equals(d2p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS2, hasSize(1));
FlowRule ruleS2 = rulesS2.iterator().next();
assertThat(ruleS2.selector(), is(DefaultTrafficSelector.builder(ipPrefixSelector).matchInPort(d2p1.port()).matchVlanId(((VlanIdCriterion) vlan100Selector.getCriterion(VLAN_VID)).vlanId()).build()));
assertThat(ruleS2.treatment(), is(DefaultTrafficTreatment.builder().setOutput(d2p0.port()).setEthDst(((ModEtherInstruction) ethDstTreatment.allInstructions().stream().filter(instruction -> instruction instanceof ModEtherInstruction).findFirst().get()).mac()).popVlan().setOutput(d2p10.port()).build()));
Collection<FlowRule> rulesS1 = rules.stream().filter(rule -> rule.deviceId().equals(d1p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS1, hasSize(1));
FlowRule ruleS1 = rulesS1.iterator().next();
assertThat(ruleS1.selector(), is(DefaultTrafficSelector.builder(ipPrefixSelector).matchInPort(d1p0.port()).matchVlanId(((VlanIdCriterion) vlan100Selector.getCriterion(VLAN_VID)).vlanId()).build()));
assertThat(ruleS1.treatment(), is(DefaultTrafficTreatment.builder().setEthDst(((ModEtherInstruction) ethDstTreatment.allInstructions().stream().filter(instruction -> instruction instanceof ModEtherInstruction).findFirst().get()).mac()).popVlan().setOutput(d1p12.port()).setEthDst(((ModEtherInstruction) ethDstTreatment.allInstructions().stream().filter(instruction -> instruction instanceof ModEtherInstruction).findFirst().get()).mac()).setOutput(d1p10.port()).setEthDst(((ModEtherInstruction) ethDstTreatment.allInstructions().stream().filter(instruction -> instruction instanceof ModEtherInstruction).findFirst().get()).mac()).setOutput(d1p11.port()).build()));
sut.deactivate();
}
use of org.onosproject.net.intent.FlowRuleIntent in project onos by opennetworkinglab.
the class LinkCollectionOptimizationTest method testDecTtlOptimization.
/**
* We test the proper optimization of sp2mp with dec tll
* and dec mpls ttl.
*/
@Test
public void testDecTtlOptimization() {
intent = LinkCollectionIntent.builder().appId(APP_ID).selector(selector).treatment(decTllTreatment).links(linksForSp2Mp).filteredIngressPoints(ImmutableSet.of(new FilteredConnectPoint(d3p10))).filteredEgressPoints(ImmutableSet.of(new FilteredConnectPoint(d1p10), new FilteredConnectPoint(d1p11), new FilteredConnectPoint(d2p10))).applyTreatmentOnEgress(true).build();
sut.activate();
List<Intent> compiled = sut.compile(intent, Collections.emptyList());
assertThat(compiled, hasSize(1));
Collection<FlowRule> rules = ((FlowRuleIntent) compiled.get(0)).flowRules();
assertThat(rules, hasSize(3));
Collection<FlowRule> rulesS3 = rules.stream().filter(rule -> rule.deviceId().equals(d3p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS3, hasSize(1));
FlowRule ruleS3 = rulesS3.iterator().next();
assertThat(ruleS3.selector(), is(DefaultTrafficSelector.builder().matchInPort(d3p10.port()).build()));
assertThat(ruleS3.treatment(), is(DefaultTrafficTreatment.builder().setOutput(d3p0.port()).build()));
Collection<FlowRule> rulesS2 = rules.stream().filter(rule -> rule.deviceId().equals(d2p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS2, hasSize(1));
FlowRule ruleS2 = rulesS2.iterator().next();
assertThat(ruleS2.selector(), is(DefaultTrafficSelector.builder().matchInPort(d2p1.port()).build()));
assertThat(ruleS2.treatment(), is(DefaultTrafficTreatment.builder().setOutput(d2p0.port()).decMplsTtl().decNwTtl().setOutput(d2p10.port()).build()));
Collection<FlowRule> rulesS1 = rules.stream().filter(rule -> rule.deviceId().equals(d1p0.deviceId())).collect(Collectors.toSet());
assertThat(rulesS1, hasSize(1));
FlowRule ruleS1 = rulesS1.iterator().next();
assertThat(ruleS1.selector(), is(DefaultTrafficSelector.builder().matchInPort(d1p0.port()).build()));
assertThat(ruleS1.treatment(), is(DefaultTrafficTreatment.builder().decMplsTtl().decNwTtl().setOutput(d1p10.port()).setOutput(d1p11.port()).build()));
sut.deactivate();
}
Aggregations