Examples with Matches org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.access.control.list.rev160218.access.lists.acl.access.list.entries.ace.Matches used on opensource projects

Example 31 with Matches

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.access.control.list.rev160218.access.lists.acl.access.list.entries.ace.Matches in project netvirt by opendaylight.

the class IPv6Handler method installPing6ResponderFlowEntry.

public void installPing6ResponderFlowEntry(BigInteger dpnId, long vpnId, String routerInternalIp, MacAddress routerMac, long label, int addOrRemove) {
    List<MatchInfo> matches = new ArrayList<>();
    matches.add(MatchIpProtocol.ICMPV6);
    matches.add(new MatchMetadata(MetaDataUtil.getVpnIdMetadata(vpnId), MetaDataUtil.METADATA_MASK_VRFID));
    matches.add(new MatchIcmpv6((short) 128, (short) 0));
    matches.add(MatchEthernetType.IPV6);
    matches.add(new MatchIpv6Destination(routerInternalIp));
    List<ActionInfo> actionsInfos = new ArrayList<>();
    // Set Eth Src and Eth Dst
    actionsInfos.add(new ActionMoveSourceDestinationEth());
    actionsInfos.add(new ActionSetFieldEthernetSource(routerMac));
    // Move Ipv6 Src to Ipv6 Dst
    actionsInfos.add(new ActionMoveSourceDestinationIpv6());
    actionsInfos.add(new ActionSetSourceIpv6(new Ipv6Prefix(routerInternalIp)));
    // Set the ICMPv6 type to 129 (echo reply)
    actionsInfos.add(new ActionSetIcmpv6Type((short) 129));
    actionsInfos.add(new ActionNxLoadInPort(BigInteger.ZERO));
    actionsInfos.add(new ActionNxResubmit(NwConstants.L3_FIB_TABLE));
    List<InstructionInfo> instructions = new ArrayList<>();
    instructions.add(new InstructionApplyActions(actionsInfos));
    int priority = FibConstants.DEFAULT_FIB_FLOW_PRIORITY + FibConstants.DEFAULT_IPV6_PREFIX_LENGTH;
    String flowRef = FibUtil.getFlowRef(dpnId, NwConstants.L3_FIB_TABLE, label, priority);
    FlowEntity flowEntity = MDSALUtil.buildFlowEntity(dpnId, NwConstants.L3_FIB_TABLE, flowRef, priority, flowRef, 0, 0, NwConstants.COOKIE_VM_FIB_TABLE, matches, instructions);
    if (addOrRemove == NwConstants.ADD_FLOW) {
        mdsalManager.syncInstallFlow(flowEntity);
    } else {
        mdsalManager.syncRemoveFlow(flowEntity);
    }
}

Example 32 with Matches

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.access.control.list.rev160218.access.lists.acl.access.list.entries.ace.Matches in project netvirt by opendaylight.

the class VrfEntryListener method installSubnetBroadcastAddrDropRule.

private void installSubnetBroadcastAddrDropRule(final BigInteger dpnId, final String rd, final long vpnId, final VrfEntry vrfEntry, int addOrRemove, WriteTransaction tx) {
    List<MatchInfo> matches = new ArrayList<>();
    LOG.debug("SUBNETROUTE: installSubnetBroadcastAddrDropRule: destPrefix {} rd {} vpnId {} dpnId {}", vrfEntry.getDestPrefix(), rd, vpnId, dpnId);
    String[] ipAddress = vrfEntry.getDestPrefix().split("/");
    String subnetBroadcastAddr = FibUtil.getBroadcastAddressFromCidr(vrfEntry.getDestPrefix());
    final int prefixLength = ipAddress.length == 1 ? 0 : Integer.parseInt(ipAddress[1]);
    InetAddress destPrefix;
    try {
        destPrefix = InetAddress.getByName(subnetBroadcastAddr);
    } catch (UnknownHostException e) {
        LOG.error("Failed to get destPrefix for prefix {} rd {} VpnId {} DPN {}", vrfEntry.getDestPrefix(), rd, vpnId, dpnId, e);
        return;
    }
    // Match on VpnId and SubnetBroadCast IP address
    matches.add(new MatchMetadata(MetaDataUtil.getVpnIdMetadata(vpnId), MetaDataUtil.METADATA_MASK_VRFID));
    matches.add(MatchEthernetType.IPV4);
    if (prefixLength != 0) {
        matches.add(new MatchIpv4Destination(subnetBroadcastAddr, Integer.toString(IPV4_ADDR_PREFIX_LENGTH)));
    }
    // Action is to drop the packet
    List<InstructionInfo> dropInstructions = new ArrayList<>();
    List<ActionInfo> actionsInfos = new ArrayList<>();
    actionsInfos.add(new ActionDrop());
    dropInstructions.add(new InstructionApplyActions(actionsInfos));
    int priority = DEFAULT_FIB_FLOW_PRIORITY + IPV4_ADDR_PREFIX_LENGTH;
    String flowRef = FibUtil.getFlowRef(dpnId, NwConstants.L3_SUBNET_ROUTE_TABLE, rd, priority, destPrefix);
    FlowEntity flowEntity = MDSALUtil.buildFlowEntity(dpnId, NwConstants.L3_SUBNET_ROUTE_TABLE, flowRef, priority, flowRef, 0, 0, COOKIE_TABLE_MISS, matches, dropInstructions);
    Flow flow = flowEntity.getFlowBuilder().build();
    String flowId = flowEntity.getFlowId();
    FlowKey flowKey = new FlowKey(new FlowId(flowId));
    Node nodeDpn = FibUtil.buildDpnNode(dpnId);
    InstanceIdentifier<Flow> flowInstanceId = InstanceIdentifier.builder(Nodes.class).child(Node.class, nodeDpn.getKey()).augmentation(FlowCapableNode.class).child(Table.class, new TableKey(flow.getTableId())).child(Flow.class, flowKey).build();
    if (addOrRemove == NwConstants.ADD_FLOW) {
        tx.put(LogicalDatastoreType.CONFIGURATION, flowInstanceId, flow, true);
    } else {
        tx.delete(LogicalDatastoreType.CONFIGURATION, flowInstanceId);
    }
}

Example 33 with Matches

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.access.control.list.rev160218.access.lists.acl.access.list.entries.ace.Matches in project netvirt by opendaylight.

the class ElanDmacUtils method buildDmacFlowForExternalRemoteMac.

/**
 * Builds a Flow to be programmed in a DPN's DMAC table. This method must be
 * used when the MAC is located in an External Device (TOR). The flow
 * matches on the specified MAC and 1) sends the packet over the CSS-TOR
 * tunnel if SHFlag is not set, or 2) drops it if SHFlag is set (what means
 * the packet came from an external tunnel)
 *
 * @param dpId
 *            DPN whose DMAC table is going to be modified
 * @param extDeviceNodeId
 *            Hwvtep node where the mac is attached to
 * @param elanTag
 *            ElanId to which the MAC is being added to
 * @param vni
 *            the vni
 * @param dstMacAddress
 *            The mac address to be programmed
 * @param displayName
 *            the display name
 * @return the flow
 */
@SuppressWarnings("checkstyle:IllegalCatch")
public Flow buildDmacFlowForExternalRemoteMac(BigInteger dpId, String extDeviceNodeId, long elanTag, Long vni, String dstMacAddress, String displayName) {
    List<MatchInfo> mkMatches = ElanUtils.buildMatchesForElanTagShFlagAndDstMac(elanTag, /* shFlag */
    false, dstMacAddress);
    List<Instruction> mkInstructions = new ArrayList<>();
    try {
        List<Action> actions = elanItmUtils.getExternalTunnelItmEgressAction(dpId, new NodeId(extDeviceNodeId), vni);
        mkInstructions.add(MDSALUtil.buildApplyActionsInstruction(actions));
    } catch (Exception e) {
        LOG.error("Could not get Egress Actions for DpId {} externalNode {}", dpId, extDeviceNodeId, e);
    }
    return MDSALUtil.buildFlowNew(NwConstants.ELAN_DMAC_TABLE, ElanUtils.getKnownDynamicmacFlowRef(NwConstants.ELAN_DMAC_TABLE, dpId, extDeviceNodeId, dstMacAddress, elanTag, false), 20, /* prio */
    displayName, 0, /* idleTimeout */
    0, /* hardTimeout */
    ElanConstants.COOKIE_ELAN_KNOWN_DMAC.add(BigInteger.valueOf(elanTag)), mkMatches, mkInstructions);
}

Example 34 with Matches

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.access.control.list.rev160218.access.lists.acl.access.list.entries.ace.Matches in project netvirt by opendaylight.

the class ElanUtils method setupTermDmacFlows.

/**
 * Installs a Flow in INTERNAL_TUNNEL_TABLE of the affected DPN that sends
 * the packet through the specified interface if the tunnel_id matches the
 * interface's lportTag.
 *
 * @param interfaceInfo
 *            the interface info
 * @param mdsalApiManager
 *            the mdsal API manager
 * @param writeFlowGroupTx
 *            the writeFLowGroup tx
 */
public void setupTermDmacFlows(InterfaceInfo interfaceInfo, IMdsalApiManager mdsalApiManager, WriteTransaction writeFlowGroupTx) {
    BigInteger dpId = interfaceInfo.getDpId();
    int lportTag = interfaceInfo.getInterfaceTag();
    Flow flow = MDSALUtil.buildFlowNew(NwConstants.INTERNAL_TUNNEL_TABLE, getIntTunnelTableFlowRef(NwConstants.INTERNAL_TUNNEL_TABLE, lportTag), 5, String.format("%s:%d", "ITM Flow Entry ", lportTag), 0, 0, ITMConstants.COOKIE_ITM.add(BigInteger.valueOf(lportTag)), getTunnelIdMatchForFilterEqualsLPortTag(lportTag), getInstructionsInPortForOutGroup(interfaceInfo.getInterfaceName()));
    mdsalApiManager.addFlowToTx(dpId, flow, writeFlowGroupTx);
    LOG.debug("Terminating service table flow entry created on dpn:{} for logical Interface port:{}", dpId, interfaceInfo.getPortName());
}

Example 35 with Matches

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.access.control.list.rev160218.access.lists.acl.access.list.entries.ace.Matches in project netvirt by opendaylight.

the class VpnUtil method findVrfEntriesByNexthop.

public static List<VrfEntry> findVrfEntriesByNexthop(DataBroker broker, String rd, String nexthop) {
    InstanceIdentifier<VrfTables> vpnVrfTableIid = InstanceIdentifier.builder(FibEntries.class).child(VrfTables.class, new VrfTablesKey(rd)).build();
    Optional<VrfTables> vrfTablesOpc = read(broker, LogicalDatastoreType.CONFIGURATION, vpnVrfTableIid);
    List<VrfEntry> matches = new ArrayList<>();
    if (vrfTablesOpc.isPresent()) {
        VrfTables vrfTables = vrfTablesOpc.get();
        for (VrfEntry vrfEntry : vrfTables.getVrfEntry()) {
            vrfEntry.getRoutePaths().stream().filter(routePath -> routePath.getNexthopAddress() != null && routePath.getNexthopAddress().equals(nexthop)).findFirst().ifPresent(routePath -> matches.add(vrfEntry));
        }
    }
    return matches;
}