Examples with PortNumber org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.PortNumber used on opensource projects

Example 6 with PortNumber

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.PortNumber in project netvirt by opendaylight.

the class AclServiceTestBaseIPv6 method newMatch.

@Override
protected Matches newMatch(int srcLowerPort, int srcUpperPort, int destLowerPort, int destupperPort, int srcRemoteIpPrefix, int dstRemoteIpPrefix, short protocol) {
    AceIpBuilder aceIpBuilder = new AceIpBuilder();
    if (destLowerPort != -1) {
        DestinationPortRangeBuilder destinationPortRangeBuilder = new DestinationPortRangeBuilder();
        destinationPortRangeBuilder.setLowerPort(new PortNumber(destLowerPort));
        destinationPortRangeBuilder.setUpperPort(new PortNumber(destupperPort));
        aceIpBuilder.setDestinationPortRange(destinationPortRangeBuilder.build());
    }
    AceIpv6Builder aceIpv6Builder = new AceIpv6Builder();
    if (srcRemoteIpPrefix == AclConstants.SOURCE_REMOTE_IP_PREFIX_SPECIFIED) {
        aceIpv6Builder.setSourceIpv6Network(new Ipv6Prefix(AclConstants.IPV6_ALL_NETWORK));
    }
    if (dstRemoteIpPrefix == AclConstants.DEST_REMOTE_IP_PREFIX_SPECIFIED) {
        aceIpv6Builder.setSourceIpv6Network(new Ipv6Prefix(AclConstants.IPV6_ALL_NETWORK));
    }
    if (protocol != -1) {
        aceIpBuilder.setProtocol(protocol);
    }
    aceIpBuilder.setAceIpVersion(aceIpv6Builder.build());
    MatchesBuilder matchesBuilder = new MatchesBuilder();
    matchesBuilder.setAceType(aceIpBuilder.build());
    return matchesBuilder.build();
}

Example 7 with PortNumber

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.PortNumber in project netvirt by opendaylight.

the class InterfaceStateEventListener method removeSnatEntriesForPort.

// TODO Clean up the exception handling
@SuppressWarnings("checkstyle:IllegalCatch")
private void removeSnatEntriesForPort(String interfaceName, String routerName) {
    Long routerId = NatUtil.getVpnId(dataBroker, routerName);
    if (routerId == NatConstants.INVALID_ID) {
        LOG.error("removeSnatEntriesForPort : routerId not found for routername {}", routerName);
        return;
    }
    BigInteger naptSwitch = getNaptSwitchforRouter(dataBroker, routerName);
    if (naptSwitch == null || naptSwitch.equals(BigInteger.ZERO)) {
        LOG.error("removeSnatEntriesForPort : NaptSwitch is not elected for router {} with Id {}", routerName, routerId);
        return;
    }
    // getInternalIp for port
    List<String> fixedIps = getFixedIpsForPort(interfaceName);
    if (fixedIps == null) {
        LOG.warn("removeSnatEntriesForPort : Internal Ips not found for InterfaceName {} in router {} with id {}", interfaceName, routerName, routerId);
        return;
    }
    for (String internalIp : fixedIps) {
        LOG.debug("removeSnatEntriesForPort : Internal Ip retrieved for interface {} is {} in router with Id {}", interfaceName, internalIp, routerId);
        IpPort ipPort = NatUtil.getInternalIpPortInfo(dataBroker, routerId, internalIp);
        if (ipPort == null) {
            LOG.debug("removeSnatEntriesForPort : no snatint-ip-port-map found for ip:{}", internalIp);
            continue;
        }
        for (IntIpProtoType protoType : ipPort.getIntIpProtoType()) {
            ProtocolTypes protocol = protoType.getProtocol();
            for (Integer portnum : protoType.getPorts()) {
                // build and remove the flow in outbound table
                try {
                    removeNatFlow(naptSwitch, NwConstants.OUTBOUND_NAPT_TABLE, routerId, internalIp, portnum);
                } catch (Exception ex) {
                    LOG.error("removeSnatEntriesForPort : Failed to remove snat flow for internalIP {} with " + "Port {} protocol {} for routerId {} in OUTBOUNDTABLE of NaptSwitch {}", internalIp, portnum, protocol, routerId, naptSwitch, ex);
                }
                // Get the external IP address and the port from the model
                NAPTEntryEvent.Protocol proto = protocol.toString().equals(ProtocolTypes.TCP.toString()) ? NAPTEntryEvent.Protocol.TCP : NAPTEntryEvent.Protocol.UDP;
                IpPortExternal ipPortExternal = NatUtil.getExternalIpPortMap(dataBroker, routerId, internalIp, String.valueOf(portnum), proto);
                if (ipPortExternal == null) {
                    LOG.error("removeSnatEntriesForPort : Mapping for internalIp {} with port {} is not found in " + "router with Id {}", internalIp, portnum, routerId);
                    return;
                }
                String externalIpAddress = ipPortExternal.getIpAddress();
                Integer portNumber = ipPortExternal.getPortNum();
                // build and remove the flow in inboundtable
                try {
                    removeNatFlow(naptSwitch, NwConstants.INBOUND_NAPT_TABLE, routerId, externalIpAddress, portNumber);
                } catch (Exception ex) {
                    LOG.error("removeSnatEntriesForPort : Failed to remove snat flow internalIP {} with " + "Port {} protocol {} for routerId {} in INBOUNDTABLE of naptSwitch {}", externalIpAddress, portNumber, protocol, routerId, naptSwitch, ex);
                }
                String internalIpPort = internalIp + ":" + portnum;
                // delete the entry from IntExtIpPortMap DS
                try {
                    naptManager.removeFromIpPortMapDS(routerId, internalIpPort, proto);
                    naptManager.removePortFromPool(internalIpPort, externalIpAddress);
                } catch (Exception ex) {
                    LOG.error("removeSnatEntriesForPort : releaseIpExtPortMapping failed, Removal of " + "ipportmap {} for router {} failed", internalIpPort, routerId, ex);
                }
            }
        }
        // delete the entry from SnatIntIpPortMap DS
        LOG.debug("removeSnatEntriesForPort : Removing InternalIp:{} on router {}", internalIp, routerId);
        naptManager.removeFromSnatIpPortDS(routerId, internalIp);
    }
}

Example 8 with PortNumber

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.PortNumber in project netvirt by opendaylight.

the class ElanUtils method buildLocalDmacFlowEntry.

/**
 * Builds the flow to be programmed in the DMAC table of the local DPN (that
 * is, where the MAC is attached to). This flow consists in:
 *
 * <p>Match: + elanTag in metadata + packet goes to a MAC locally attached
 * Actions: + optionally, pop-vlan + set-vlan-id + output to ifName's
 * portNumber
 *
 * @param elanTag
 *            the elan tag
 * @param dpId
 *            the dp id
 * @param ifName
 *            the if name
 * @param macAddress
 *            the mac address
 * @param elanInfo
 *            the elan info
 * @param ifTag
 *            the if tag
 * @return the flow
 */
public Flow buildLocalDmacFlowEntry(long elanTag, BigInteger dpId, String ifName, String macAddress, ElanInstance elanInfo, long ifTag) {
    List<MatchInfo> mkMatches = new ArrayList<>();
    mkMatches.add(new MatchMetadata(ElanHelper.getElanMetadataLabel(elanTag), MetaDataUtil.METADATA_MASK_SERVICE));
    mkMatches.add(new MatchEthernetDestination(new MacAddress(macAddress)));
    List<Instruction> mkInstructions = new ArrayList<>();
    List<Action> actions = getEgressActionsForInterface(ifName, /* tunnelKey */
    null);
    mkInstructions.add(MDSALUtil.buildApplyActionsInstruction(actions));
    Flow flow = MDSALUtil.buildFlowNew(NwConstants.ELAN_DMAC_TABLE, getKnownDynamicmacFlowRef(NwConstants.ELAN_DMAC_TABLE, dpId, ifTag, macAddress, elanTag), 20, elanInfo.getElanInstanceName(), 0, 0, ElanConstants.COOKIE_ELAN_KNOWN_DMAC.add(BigInteger.valueOf(elanTag)), mkMatches, mkInstructions);
    return flow;
}

Example 9 with PortNumber

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.PortNumber in project netvirt by opendaylight.

the class QosAlertManager method addToQosAlertCache.

public void addToQosAlertCache(Port port) {
    LOG.trace("Adding port {} in cache", port.getUuid());
    BigInteger dpnId = qosNeutronUtils.getDpnForInterface(port.getUuid().getValue());
    if (dpnId.equals(BigInteger.ZERO)) {
        LOG.debug("DPN ID for port {} not found", port.getUuid());
        return;
    }
    String portNumber = qosNeutronUtils.getPortNumberForInterface(port.getUuid().getValue());
    LOG.trace("Adding DPN ID {} with port {} port number {}", dpnId, port.getUuid(), portNumber);
    qosAlertDpnPortNumberMap.computeIfAbsent(dpnId, key -> new ConcurrentHashMap<>()).put(portNumber, new QosAlertPortData(port, qosNeutronUtils, alertThresholdSupplier));
}

Example 10 with PortNumber

use of org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.inet.types.rev130715.PortNumber in project bgpcep by opendaylight.

the class NeighborStateCliUtilsTest method testFullNeighborStateCli.

@Test
public void testFullNeighborStateCli() throws IOException {
    final org.opendaylight.yang.gen.v1.http.openconfig.net.yang.bgp.multiprotocol.rev151009.bgp.common.afi.safi.list.afi.safi.StateBuilder builder = new org.opendaylight.yang.gen.v1.http.openconfig.net.yang.bgp.multiprotocol.rev151009.bgp.common.afi.safi.list.afi.safi.StateBuilder();
    builder.addAugmentation(NeighborAfiSafiStateAugmentation.class, new NeighborAfiSafiStateAugmentationBuilder().setActive(true).setPrefixes(new PrefixesBuilder().setInstalled(1L).setReceived(1L).setSent(2L).build()).build());
    final AfiSafi afiSafi = new AfiSafiBuilder().setAfiSafiName(IPV4UNICAST.class).setState(builder.build()).build();
    final StateBuilder stateBuilder = new StateBuilder();
    stateBuilder.addAugmentation(NeighborStateAugmentation.class, new NeighborStateAugmentationBuilder().setSupportedCapabilities(Collections.singletonList(ADDPATHS.class)).setSessionState(BgpNeighborState.SessionState.ACTIVE).build());
    final Received received = new ReceivedBuilder().setNOTIFICATION(BigInteger.ONE).setUPDATE(BigInteger.TEN).build();
    final Sent sent = new SentBuilder().setNOTIFICATION(BigInteger.TEN).setUPDATE(BigInteger.ONE).build();
    stateBuilder.addAugmentation(BgpNeighborStateAugmentation.class, new BgpNeighborStateAugmentationBuilder().setMessages(new MessagesBuilder().setReceived(received).setSent(sent).build()).build());
    final Transport transport = new TransportBuilder().setState(new org.opendaylight.yang.gen.v1.http.openconfig.net.yang.bgp.rev151009.bgp.neighbor.group.transport.StateBuilder().addAugmentation(NeighborTransportStateAugmentation.class, new NeighborTransportStateAugmentationBuilder().setRemoteAddress(NEIGHBOR_IP_ADDRESS).setLocalPort(new PortNumber(1234)).setRemotePort(new PortNumber(4321)).build()).build()).build();
    final Timers timers = new TimersBuilder().setState(new org.opendaylight.yang.gen.v1.http.openconfig.net.yang.bgp.rev151009.bgp.neighbor.group.timers.StateBuilder().addAugmentation(NeighborTimersStateAugmentation.class, new NeighborTimersStateAugmentationBuilder().setNegotiatedHoldTime(BigDecimal.TEN).setUptime(new Timeticks(600L)).build()).build()).build();
    final Neighbor neighbor = new NeighborBuilder().setState(stateBuilder.build()).setAfiSafis(new AfiSafisBuilder().setAfiSafi(Collections.singletonList(afiSafi)).build()).setTransport(transport).setTimers(timers).build();
    NeighborStateCliUtils.displayNeighborOperationalState(NEIGHBOR_ADDRESS, neighbor, this.stream);
    final String expected = IOUtils.toString(getClass().getClassLoader().getResourceAsStream("neighbor.txt"), UTF8);
    assertEquals(expected, this.output.toString());
}