Examples with Sent org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.openconfig.extensions.rev180321.network.instances.network.instance.protocols.protocol.bgp.neighbors.neighbor.state.messages.Sent used on opensource projects

Example 26 with Sent

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.openconfig.extensions.rev180321.network.instances.network.instance.protocols.protocol.bgp.neighbors.neighbor.state.messages.Sent in project netvirt by opendaylight.

the class VpnFootprintService method removeOrUpdateVpnToDpnListForInterfaceName.

private void removeOrUpdateVpnToDpnListForInterfaceName(long vpnId, String rd, BigInteger dpnId, String intfName, String vpnName) {
    Boolean lastDpnOnVpn = Boolean.FALSE;
    synchronized (vpnName.intern()) {
        InstanceIdentifier<VpnToDpnList> id = VpnUtil.getVpnToDpnListIdentifier(rd, dpnId);
        VpnToDpnList dpnInVpn = VpnUtil.read(dataBroker, LogicalDatastoreType.OPERATIONAL, id).orNull();
        if (dpnInVpn == null) {
            LOG.error("removeOrUpdateVpnToDpnList: Could not find DpnToVpn map for VPN=[name={} rd={} id={}]" + " and dpnId={}", vpnName, rd, id, dpnId);
            return;
        }
        List<VpnInterfaces> vpnInterfaces = dpnInVpn.getVpnInterfaces();
        if (vpnInterfaces == null) {
            LOG.error("Could not find vpnInterfaces for DpnInVpn map for VPN=[name={} rd={} id={}] and dpnId={}", vpnName, rd, id, dpnId);
            return;
        }
        VpnInterfaces currVpnInterface = new VpnInterfacesBuilder().setInterfaceName(intfName).build();
        if (vpnInterfaces.remove(currVpnInterface)) {
            WriteTransaction writeTxn = dataBroker.newWriteOnlyTransaction();
            if (vpnInterfaces.isEmpty()) {
                List<IpAddresses> ipAddresses = dpnInVpn.getIpAddresses();
                VpnToDpnListBuilder dpnInVpnBuilder = new VpnToDpnListBuilder(dpnInVpn).setVpnInterfaces(null);
                if (ipAddresses == null || ipAddresses.isEmpty()) {
                    dpnInVpnBuilder.setDpnState(VpnToDpnList.DpnState.Inactive);
                    lastDpnOnVpn = Boolean.TRUE;
                } else {
                    LOG.error("removeOrUpdateVpnToDpnList: vpn interfaces are empty but ip addresses are present" + " for the vpn {} in dpn {} interface {}", vpnName, dpnId, intfName);
                }
                LOG.debug("removeOrUpdateVpnToDpnList: Removing vpn footprint for vpn {} vpnId {} interface {}," + " on dpn {}", vpnName, vpnName, intfName, dpnId);
                writeTxn.put(LogicalDatastoreType.OPERATIONAL, id, dpnInVpnBuilder.build(), WriteTransaction.CREATE_MISSING_PARENTS);
            } else {
                writeTxn.delete(LogicalDatastoreType.OPERATIONAL, id.child(VpnInterfaces.class, new VpnInterfacesKey(intfName)));
                LOG.debug("removeOrUpdateVpnToDpnList: Updating vpn footprint for vpn {} vpnId {} interface {}," + " on dpn {}", vpnName, vpnName, intfName, dpnId);
            }
            try {
                writeTxn.submit().get();
            } catch (InterruptedException | ExecutionException e) {
                LOG.error("removeOrUpdateVpnToDpnList: Error removing from dpnToVpnList for vpn {} vpnId {}" + " interface {} dpn {}", vpnName, vpnId, intfName, dpnId, e);
                throw new RuntimeException(e.getMessage(), e);
            }
        }
    }
    // Ends synchronized block
    LOG.info("removeOrUpdateVpnToDpnList: Updated/Removed vpn footprint for vpn {} vpnId {} interface {}," + " on dpn {}", vpnName, vpnName, intfName, dpnId);
    if (lastDpnOnVpn) {
        fibManager.cleanUpDpnForVpn(dpnId, vpnId, rd, new DpnEnterExitVpnWorker(dpnId, vpnName, rd, false));
        LOG.info("removeOrUpdateVpnToDpnList: Sent cleanup event for dpn {} in VPN {} vpnId {} interface {}", dpnId, vpnName, vpnId, intfName);
    }
}

Example 27 with Sent

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.openconfig.extensions.rev180321.network.instances.network.instance.protocols.protocol.bgp.neighbors.neighbor.state.messages.Sent in project netvirt by opendaylight.

the class OpenFlow13Provider method createIngressClassifierAclFlow.

/*
     * Ingress Classifier ACL flow:
     *     Performs the ACL classification, and sends packets to Ingress Dispatcher
     *     Match on inport (corresponds to Neutron NW/tenant), Push NSH, init(nsp, nsi, C1, C2),
     *     and resubmit to Ingress Dispatcher to be sent down the rest of
     *     the pipeline
     */
public Flow createIngressClassifierAclFlow(NodeId nodeId, MatchBuilder match, Long port, long nsp, short nsi) {
    OpenFlow13Utils.addMatchInPort(match, nodeId, port);
    List<Action> actionList = new ArrayList<>();
    actionList.add(OpenFlow13Utils.createActionNxPushNsh(actionList.size()));
    actionList.add(OpenFlow13Utils.createActionNxLoadNshMdtype(NSH_MDTYPE_ONE, actionList.size()));
    actionList.add(OpenFlow13Utils.createActionNxLoadNp(NSH_NP_ETH, actionList.size()));
    actionList.add(OpenFlow13Utils.createActionNxLoadNsp((int) nsp, actionList.size()));
    actionList.add(OpenFlow13Utils.createActionNxLoadNsi(nsi, actionList.size()));
    actionList.add(OpenFlow13Utils.createActionNxLoadNshc1(ACL_FLAG_CONTEXT_VALUE, actionList.size()));
    actionList.add(OpenFlow13Utils.createActionNxLoadNshc2(DEFAULT_NSH_CONTEXT_VALUE, actionList.size()));
    actionList.add(OpenFlow13Utils.createActionResubmitTable(NwConstants.LPORT_DISPATCHER_TABLE, actionList.size()));
    InstructionsBuilder isb = OpenFlow13Utils.wrapActionsIntoApplyActionsInstruction(actionList);
    // The flowIdStr needs to be unique, so the best way to make it unique is to use the match
    String flowIdStr = INGRESS_CLASSIFIER_ACL_FLOW_NAME + "_" + nodeId.getValue() + match.build().toString();
    return OpenFlow13Utils.createFlowBuilder(NwConstants.INGRESS_SFC_CLASSIFIER_ACL_TABLE, INGRESS_CLASSIFIER_ACL_PRIORITY, INGRESS_CLASSIFIER_ACL_COOKIE, INGRESS_CLASSIFIER_ACL_FLOW_NAME, flowIdStr, match, isb).build();
}

Example 28 with Sent

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.openconfig.extensions.rev180321.network.instances.network.instance.protocols.protocol.bgp.neighbors.neighbor.state.messages.Sent in project netvirt by opendaylight.

the class NaptEventHandler method buildAndGetSetActionInstructionInfo.

private static List<InstructionInfo> buildAndGetSetActionInstructionInfo(String ipAddress, int port, long segmentId, long vpnId, short tableId, NAPTEntryEvent.Protocol protocol, String extGwMacAddress) {
    ActionInfo ipActionInfo = null;
    ActionInfo macActionInfo = null;
    ActionInfo portActionInfo = null;
    ArrayList<ActionInfo> listActionInfo = new ArrayList<>();
    ArrayList<InstructionInfo> instructionInfo = new ArrayList<>();
    switch(tableId) {
        case NwConstants.OUTBOUND_NAPT_TABLE:
            ipActionInfo = new ActionSetSourceIp(ipAddress);
            // Added External Gateway MAC Address
            macActionInfo = new ActionSetFieldEthernetSource(new MacAddress(extGwMacAddress));
            if (protocol == NAPTEntryEvent.Protocol.TCP) {
                portActionInfo = new ActionSetTcpSourcePort(port);
            } else if (protocol == NAPTEntryEvent.Protocol.UDP) {
                portActionInfo = new ActionSetUdpSourcePort(port);
            }
            // reset the split-horizon bit to allow traffic from tunnel to be sent back to the provider port
            instructionInfo.add(new InstructionWriteMetadata(MetaDataUtil.getVpnIdMetadata(vpnId), MetaDataUtil.METADATA_MASK_VRFID.or(MetaDataUtil.METADATA_MASK_SH_FLAG)));
            break;
        case NwConstants.INBOUND_NAPT_TABLE:
            ipActionInfo = new ActionSetDestinationIp(ipAddress);
            if (protocol == NAPTEntryEvent.Protocol.TCP) {
                portActionInfo = new ActionSetTcpDestinationPort(port);
            } else if (protocol == NAPTEntryEvent.Protocol.UDP) {
                portActionInfo = new ActionSetUdpDestinationPort(port);
            }
            instructionInfo.add(new InstructionWriteMetadata(MetaDataUtil.getVpnIdMetadata(segmentId), MetaDataUtil.METADATA_MASK_VRFID));
            break;
        default:
            LOG.error("buildAndGetSetActionInstructionInfo : Neither OUTBOUND_NAPT_TABLE nor " + "INBOUND_NAPT_TABLE matches with input table id {}", tableId);
            return null;
    }
    listActionInfo.add(ipActionInfo);
    listActionInfo.add(portActionInfo);
    if (macActionInfo != null) {
        listActionInfo.add(macActionInfo);
        LOG.debug("buildAndGetSetActionInstructionInfo : External GW MAC Address {} is found  ", macActionInfo);
    }
    instructionInfo.add(new InstructionApplyActions(listActionInfo));
    instructionInfo.add(new InstructionGotoTable(NwConstants.NAPT_PFIB_TABLE));
    return instructionInfo;
}

Example 29 with Sent

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.openconfig.extensions.rev180321.network.instances.network.instance.protocols.protocol.bgp.neighbors.neighbor.state.messages.Sent in project openflowplugin by opendaylight.

the class SystemNotificationsListenerImpl method executeOnSwitchIdleEvent.

@SuppressWarnings("checkstyle:IllegalCatch")
private void executeOnSwitchIdleEvent() {
    boolean shouldBeDisconnected = true;
    final InetSocketAddress remoteAddress = connectionContext.getConnectionAdapter().getRemoteAddress();
    if (ConnectionContext.CONNECTION_STATE.WORKING.equals(connectionContext.getConnectionState())) {
        FeaturesReply features = connectionContext.getFeatures();
        LOG.info("Switch Idle state occurred, node={}|auxId={}", remoteAddress, features.getAuxiliaryId());
        connectionContext.changeStateToTimeouting();
        EchoInputBuilder builder = new EchoInputBuilder();
        builder.setVersion(features.getVersion());
        builder.setXid(ECHO_XID.getValue());
        Future<RpcResult<EchoOutput>> echoReplyFuture = connectionContext.getConnectionAdapter().echo(builder.build());
        try {
            RpcResult<EchoOutput> echoReplyValue = echoReplyFuture.get(echoReplyTimeout, TimeUnit.MILLISECONDS);
            if (echoReplyValue.isSuccessful() && Objects.equals(echoReplyValue.getResult().getXid(), ECHO_XID.getValue())) {
                connectionContext.changeStateToWorking();
                shouldBeDisconnected = false;
            } else {
                logErrors(remoteAddress, echoReplyValue);
            }
        } catch (Exception e) {
            if (LOG.isWarnEnabled()) {
                LOG.warn("Exception while  waiting for echoReply from [{}] in TIMEOUTING state: {}", remoteAddress, e.getMessage());
            }
            if (LOG.isTraceEnabled()) {
                LOG.trace("Exception while  waiting for echoReply from [{}] in TIMEOUTING state: {}", remoteAddress, e);
            }
        }
    }
    if (shouldBeDisconnected) {
        if (LOG.isInfoEnabled()) {
            LOG.info("ConnectionEvent:Closing connection as device is idle. Echo sent at {}. Device:{}, NodeId:{}", new Date(System.currentTimeMillis() - echoReplyTimeout), remoteAddress, connectionContext.getSafeNodeIdForLOG());
        }
        connectionContext.closeConnection(true);
    }
}

Example 30 with Sent

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.bgp.openconfig.extensions.rev180321.network.instances.network.instance.protocols.protocol.bgp.neighbors.neighbor.state.messages.Sent in project openflowplugin by opendaylight.

the class MockPlugin method onEchoRequestMessage.

@Override
public void onEchoRequestMessage(final EchoRequestMessage notification) {
    LOGGER.debug("MockPlugin.onEchoRequestMessage() adapter: {}", adapter);
    new Thread(() -> {
        LOGGER.debug("MockPlugin.onEchoRequestMessage().run() started adapter: {}", adapter);
        EchoReplyInputBuilder replyBuilder = new EchoReplyInputBuilder();
        replyBuilder.setVersion((short) 4);
        replyBuilder.setXid(notification.getXid());
        EchoReplyInput echoReplyInput = replyBuilder.build();
        adapter.echoReply(echoReplyInput);
        LOGGER.debug("adapter.EchoReply(Input) sent : ", echoReplyInput.toString());
        LOGGER.debug("MockPlugin.onEchoRequestMessage().run() finished adapter: {}", adapter);
    }).start();
}