Examples with Message org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.types.rev131005.Message used on opensource projects

Example 11 with Message

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.types.rev131005.Message in project netvirt by opendaylight.

the class Ipv6PktHandlerTest method testOnPacketReceivedWithInvalidParams.

@Test
public void testOnPacketReceivedWithInvalidParams() throws Exception {
    // invalid ethtype
    pktHandler.onPacketReceived(new PacketReceivedBuilder().setPayload(ipv6TestUtils.buildPacket(// Destination MAC
    "33 33 FF F5 00 00", // Source MAC
    "00 01 02 03 04 05", // Invalid (fake IPv6)
    "80 00", // Version 6, traffic class E0, no flowlabel
    "6E 00 00 00", // Payload length
    "00 18", // Next header is authentication
    "3A", // Hop limit
    "FF", // Source IP
    "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00", // Destination IP
    "FF 02 00 00 00 00 00 00 00 00 00 01 FF F5 00 00")).build());
    verify(pktProcessService, times(0)).transmitPacket(any(TransmitPacketInput.class));
    // invalid ipv6 header
    pktHandler.onPacketReceived(new PacketReceivedBuilder().setPayload(ipv6TestUtils.buildPacket(// Destination MAC
    "33 33 FF F5 00 00", // Source MAC
    "00 01 02 03 04 05", // IPv6
    "86 DD", // Version 6, traffic class E0, no flowlabel
    "6E 00 00 00", // Payload length
    "00 18", // Next header is authentication
    "33", // Hop limit
    "FF", // Source IP
    "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00", // Destination IP
    "FF 02 00 00 00 00 00 00 00 00 00 01 FF F5 00 00")).build());
    verify(pktProcessService, times(0)).transmitPacket(any(TransmitPacketInput.class));
    // invalid icmpv6 header
    pktHandler.onPacketReceived(new PacketReceivedBuilder().setPayload(ipv6TestUtils.buildPacket(// Destination MAC
    "33 33 FF F5 00 00", // Source MAC
    "00 01 02 03 04 05", // IPv6
    "86 DD", // Version 6, traffic class E0, no flowlabel
    "6E 00 00 00", // Payload length
    "00 18", // Next header is ICMPv6
    "3A", // Hop limit
    "FF", // Source IP
    "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00", // Destination IP
    "FF 02 00 00 00 00 00 00 00 00 00 01 FF F5 00 00", // ICMPv6 router solicitation
    "85", // Code
    "00", // Checksum (valid)
    "67 3C", // ICMPv6 message body
    "00 00 00 00", // Target
    "FE 80 00 00 00 00 00 00 C0 00 54 FF FE F5 00 00")).build());
    verify(pktProcessService, times(0)).transmitPacket(any(TransmitPacketInput.class));
}

Example 12 with Message

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.types.rev131005.Message in project netvirt by opendaylight.

the class NexthopManager method createLocalNextHop.

public long createLocalNextHop(long vpnId, BigInteger dpnId, String ifName, String ipNextHopAddress, String ipPrefixAddress, String gwMacAddress, String jobKey) {
    String vpnName = fibUtil.getVpnNameFromId(vpnId);
    if (vpnName == null) {
        return 0;
    }
    String macAddress = fibUtil.getMacAddressFromPrefix(ifName, vpnName, ipPrefixAddress);
    String ipAddress = macAddress != null ? ipPrefixAddress : ipNextHopAddress;
    long groupId = createNextHopPointer(getNextHopKey(vpnId, ipAddress));
    if (groupId == 0) {
        LOG.error("Unable to allocate groupId for vpnId {} , prefix {}  IntfName {}, nextHopAddr {}", vpnId, ipAddress, ifName, ipNextHopAddress);
        return groupId;
    }
    String nextHopLockStr = vpnId + ipAddress;
    jobCoordinator.enqueueJob(jobKey, () -> {
        synchronized (nextHopLockStr.intern()) {
            VpnNexthop nexthop = getVpnNexthop(vpnId, ipAddress);
            LOG.trace("nexthop: {} retrieved for vpnId {}, prefix {}, ifName {} on dpn {}", nexthop, vpnId, ipAddress, ifName, dpnId);
            if (nexthop == null) {
                String encMacAddress = macAddress == null ? fibUtil.getMacAddressFromPrefix(ifName, vpnName, ipAddress) : macAddress;
                List<BucketInfo> listBucketInfo = new ArrayList<>();
                List<ActionInfo> listActionInfo = new ArrayList<>();
                int actionKey = 0;
                // MAC re-write
                if (encMacAddress != null) {
                    if (gwMacAddress != null) {
                        LOG.trace("The Local NextHop Group Source Mac {} for VpnInterface {} on VPN {}", gwMacAddress, ifName, vpnId);
                        listActionInfo.add(new ActionSetFieldEthernetSource(actionKey++, new MacAddress(gwMacAddress)));
                    }
                    listActionInfo.add(new ActionSetFieldEthernetDestination(actionKey++, new MacAddress(encMacAddress)));
                // listActionInfo.add(0, new ActionPopMpls());
                } else {
                    // FIXME: Log message here.
                    LOG.debug("mac address for new local nexthop is null");
                }
                listActionInfo.addAll(getEgressActionsForInterface(ifName, actionKey));
                BucketInfo bucket = new BucketInfo(listActionInfo);
                listBucketInfo.add(bucket);
                GroupEntity groupEntity = MDSALUtil.buildGroupEntity(dpnId, groupId, ipAddress, GroupTypes.GroupAll, listBucketInfo);
                LOG.trace("Install LNH Group: id {}, mac address {}, interface {} for prefix {}", groupId, encMacAddress, ifName, ipAddress);
                // Try to install group directly on the DPN bypassing the FRM, in order to avoid waiting for the
                // group to get installed before programming the flows
                installGroupOnDpn(groupId, dpnId, ipAddress, listBucketInfo, getNextHopKey(vpnId, ipAddress), GroupTypes.GroupAll);
                // install Group
                mdsalApiManager.syncInstallGroup(groupEntity);
                // update MD-SAL DS
                addVpnNexthopToDS(dpnId, vpnId, ipAddress, groupId);
            } else {
                // nexthop exists already; a new flow is going to point to
                // it, increment the flowrefCount by 1
                int flowrefCnt = nexthop.getFlowrefCount() + 1;
                VpnNexthop nh = new VpnNexthopBuilder().setKey(new VpnNexthopKey(ipAddress)).setFlowrefCount(flowrefCnt).build();
                LOG.trace("Updating vpnnextHop {} for refCount {} to Operational DS", nh, flowrefCnt);
                MDSALUtil.syncUpdate(dataBroker, LogicalDatastoreType.OPERATIONAL, getVpnNextHopIdentifier(vpnId, ipAddress), nh);
            }
        }
        return Collections.emptyList();
    });
    return groupId;
}

Example 13 with Message

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.types.rev131005.Message in project bgpcep by opendaylight.

the class BGPNotificationMessageParser method parseMessageBody.

/**
 * Parses BGP Notification message to bytes.
 *
 * @param body ByteBuf to be parsed
 * @param messageLength the length of the message
 * @return {@link Notify} which represents BGP notification message
 * @throws BGPDocumentedException if parsing goes wrong
 */
@Override
public Notify parseMessageBody(final ByteBuf body, final int messageLength) throws BGPDocumentedException {
    Preconditions.checkArgument(body != null, "Buffer cannot be null.");
    if (body.readableBytes() < ERROR_SIZE) {
        throw BGPDocumentedException.badMessageLength("Notification message too small.", messageLength);
    }
    final int errorCode = body.readUnsignedByte();
    final int errorSubcode = body.readUnsignedByte();
    final NotifyBuilder builder = new NotifyBuilder().setErrorCode((short) errorCode).setErrorSubcode((short) errorSubcode);
    if (body.isReadable()) {
        builder.setData(ByteArray.readAllBytes(body));
    }
    LOG.debug("BGP Notification message was parsed: err = {}, data = {}.", BGPError.forValue(errorCode, errorSubcode), Arrays.toString(builder.getData()));
    return builder.build();
}

Example 14 with Message

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.types.rev131005.Message in project bgpcep by opendaylight.

the class BGPRouteRefreshMessageParser method serializeMessage.

/**
 * Serializes BGP Route Refresh message.
 *
 * @param message to be serialized
 * @param bytes ByteBuf where the message will be serialized
 */
@Override
public void serializeMessage(final Notification message, final ByteBuf bytes) {
    Preconditions.checkArgument(message instanceof RouteRefresh, "Message is not of type RouteRefresh.");
    final RouteRefresh msg = (RouteRefresh) message;
    final ByteBuf msgBuf = Unpooled.buffer(TRIPLET_BYTE_SIZE);
    MultiprotocolCapabilitiesUtil.serializeMPAfiSafi(this.afiReg, this.safiReg, msg.getAfi(), msg.getSafi(), msgBuf);
    LOG.trace("RouteRefresh message serialized to: {}", ByteBufUtil.hexDump(msgBuf));
    MessageUtil.formatMessage(TYPE, msgBuf, bytes);
}

Example 15 with Message

use of org.opendaylight.yang.gen.v1.urn.opendaylight.params.xml.ns.yang.pcep.types.rev131005.Message in project bgpcep by opendaylight.

the class BGPParserTest method testGetUpdateMessage5.

/*
     * Tests withdrawn routes.
     *
     * ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <- marker
     * 00 1c <- length (28) - including header
     * 02 <- message type
     * 00 05 <- withdrawn routes length (5)
     * 1e ac 10 00 04 <- route (172.16.0.4)
     * 00 00 <- total path attribute length
     */
@Test
public void testGetUpdateMessage5() throws Exception {
    final byte[] body = ByteArray.cutBytes(inputBytes.get(4), MessageUtil.COMMON_HEADER_LENGTH);
    final int messageLength = ByteArray.bytesToInt(ByteArray.subByte(inputBytes.get(4), MessageUtil.MARKER_LENGTH, LENGTH_FIELD_LENGTH));
    final Update message = BGPParserTest.updateParser.parseMessageBody(Unpooled.copiedBuffer(body), messageLength);
    // attributes
    final List<WithdrawnRoutes> withdrawnRoutes = Lists.newArrayList(new WithdrawnRoutesBuilder().setPrefix(new Ipv4Prefix("172.16.0.4/30")).build());
    // check API message
    final Update expectedMessage = new UpdateBuilder().setWithdrawnRoutes(withdrawnRoutes).build();
    assertEquals(expectedMessage.getWithdrawnRoutes(), message.getWithdrawnRoutes());
    final ByteBuf buffer = Unpooled.buffer();
    BGPParserTest.updateParser.serializeMessage(message, buffer);
    assertArrayEquals(inputBytes.get(4), ByteArray.readAllBytes(buffer));
}