Examples with Prefix org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.nt.l3.unicast.igp.topology.rev131021.igp.node.attributes.igp.node.attributes.Prefix used on opensource projects

Example 71 with Prefix

use of org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.nt.l3.unicast.igp.topology.rev131021.igp.node.attributes.igp.node.attributes.Prefix in project bgpcep by opendaylight.

the class AbstractAddPathTest method createSimpleUpdate.

private static Update createSimpleUpdate(final Ipv4Prefix prefix, final PathId pathId, final ClusterIdentifier clusterId, final long localPreference) {
    final AttributesBuilder attBuilder = new AttributesBuilder();
    attBuilder.setLocalPref(new LocalPrefBuilder().setPref(localPreference).build());
    attBuilder.setOrigin(new OriginBuilder().setValue(BgpOrigin.Igp).build());
    attBuilder.setAsPath(new AsPathBuilder().setSegments(Collections.emptyList()).build());
    if (clusterId != null) {
        attBuilder.setClusterId(new ClusterIdBuilder().setCluster(Collections.singletonList(clusterId)).build());
        attBuilder.setOriginatorId(new OriginatorIdBuilder().setOriginator(new Ipv4Address(clusterId)).build());
    }
    addAttributeAugmentation(attBuilder, prefix, pathId);
    return new UpdateBuilder().setAttributes(attBuilder.build()).build();
}

Example 72 with Prefix

use of org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.nt.l3.unicast.igp.topology.rev131021.igp.node.attributes.igp.node.attributes.Prefix in project bgpcep by opendaylight.

the class AbstractAddPathTest method createSimpleWithdrawalUpdate.

private static Update createSimpleWithdrawalUpdate(final Ipv4Prefix prefix, final long localPreference) {
    final AttributesBuilder attBuilder = new AttributesBuilder();
    attBuilder.setLocalPref(new LocalPrefBuilder().setPref(localPreference).build());
    attBuilder.setOrigin(new OriginBuilder().setValue(BgpOrigin.Igp).build());
    attBuilder.setAsPath(new AsPathBuilder().setSegments(Collections.emptyList()).build());
    attBuilder.setUnrecognizedAttributes(Collections.emptyList());
    return new UpdateBuilder().setWithdrawnRoutes(Collections.singletonList(new WithdrawnRoutesBuilder().setPrefix(prefix).build())).build();
}

Example 73 with Prefix

use of org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.nt.l3.unicast.igp.topology.rev131021.igp.node.attributes.igp.node.attributes.Prefix in project bgpcep by opendaylight.

the class AddPathNPathsTest method testUseCase1.

/*
     * N-Paths
     *                                            ___________________
     *                                           | ODL BGP 127.0.0.1 |
     * [peer://127.0.0.2; p1, lp100] --(iBGP)--> |                   | --(RR-client, non add-path) --> [Peer://127.0.0.5; (p1, lp100), (p1, lp1200)]
     * [peer://127.0.0.3; p1, lp200] --(iBGP)--> |                   |
     * [peer://127.0.0.4; p1, lp50] --(iBGP)-->  |                   | --(RR-client, add-path) --> [Peer://127.0.0.6; (p1, path-id1, lp100), (p1, path-id2, pl50), (p1, path-id3, pl200)]
     * [peer://127.0.0.2; p1, lp20] --(iBGP)-->  |___________________|
     * p1 = 1.1.1.1/32
     */
@Test
public void testUseCase1() throws Exception {
    final BgpParameters nonAddPathParams = createParameter(false);
    final BgpParameters addPathParams = createParameter(true);
    configurePeer(PEER1, this.ribImpl, nonAddPathParams, PeerRole.Ibgp, this.serverRegistry);
    final BGPSessionImpl session1 = createPeerSession(PEER1, nonAddPathParams, new SimpleSessionListener());
    configurePeer(PEER2, this.ribImpl, nonAddPathParams, PeerRole.Ibgp, this.serverRegistry);
    final BGPSessionImpl session2 = createPeerSession(PEER2, nonAddPathParams, new SimpleSessionListener());
    configurePeer(PEER3, this.ribImpl, nonAddPathParams, PeerRole.Ibgp, this.serverRegistry);
    final BGPSessionImpl session3 = createPeerSession(PEER3, nonAddPathParams, new SimpleSessionListener());
    final SimpleSessionListener listener4 = new SimpleSessionListener();
    configurePeer(PEER4, this.ribImpl, nonAddPathParams, PeerRole.RrClient, this.serverRegistry);
    final BGPSessionImpl session4 = createPeerSession(PEER4, nonAddPathParams, listener4);
    final SimpleSessionListener listener5 = new SimpleSessionListener();
    configurePeer(PEER5, this.ribImpl, addPathParams, PeerRole.RrClient, this.serverRegistry);
    final BGPSessionImpl session5 = createPeerSession(PEER5, addPathParams, listener5);
    checkPeersPresentOnDataStore(5);
    // new best route so far
    sendRouteAndCheckIsOnLocRib(session1, PREFIX1, 100, 1);
    checkReceivedMessages(listener4, 1);
    checkReceivedMessages(listener5, 1);
    assertEquals(UPD_100, listener5.getListMsg().get(0));
    final SimpleSessionListener listener6 = new SimpleSessionListener();
    configurePeer(PEER6, this.ribImpl, nonAddPathParams, PeerRole.RrClient, this.serverRegistry);
    final BGPSessionImpl session6 = createPeerSession(PEER6, nonAddPathParams, listener6);
    checkPeersPresentOnDataStore(6);
    checkReceivedMessages(listener6, 1);
    assertEquals(UPD_NA_100, listener6.getListMsg().get(0));
    session6.close();
    checkPeersPresentOnDataStore(5);
    // the second best route
    sendRouteAndCheckIsOnLocRib(session2, PREFIX1, 50, 2);
    checkReceivedMessages(listener4, 1);
    checkReceivedMessages(listener5, 2);
    assertEquals(UPD_50, listener5.getListMsg().get(1));
    // new best route
    sendRouteAndCheckIsOnLocRib(session3, PREFIX1, 200, 2);
    checkReceivedMessages(listener4, 2);
    checkReceivedMessages(listener5, 3);
    assertEquals(UPD_200, listener5.getListMsg().get(2));
    // the worst prefix, no changes
    sendRouteAndCheckIsOnLocRib(session2, PREFIX1, 20, 2);
    checkReceivedMessages(listener4, 2);
    checkReceivedMessages(listener5, 3);
    // withdraw second best route, 2 advertisement (1 withdrawal) for add-path supported, none for non add path
    sendWithdrawalRouteAndCheckIsOnLocRib(session1, PREFIX1, 100, 2);
    checkReceivedMessages(listener4, 2);
    checkReceivedMessages(listener5, 5);
    // we advertise again to try new test
    sendRouteAndCheckIsOnLocRib(session1, PREFIX1, 100, 2);
    checkReceivedMessages(listener4, 2);
    checkReceivedMessages(listener5, 6);
    // withdraw second best route, 2 advertisement (1 withdrawal) for add-path supported, 1 withdrawal for non add path
    sendWithdrawalRouteAndCheckIsOnLocRib(session3, PREFIX1, 200, 2);
    checkReceivedMessages(listener4, 3);
    checkReceivedMessages(listener5, 8);
    session1.close();
    session2.close();
    session3.close();
    session4.close();
    session5.close();
}

Example 74 with Prefix

use of org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.nt.l3.unicast.igp.topology.rev131021.igp.node.attributes.igp.node.attributes.Prefix in project bgpcep by opendaylight.

the class BGPSynchronization method updReceived.

/**
 * For each received Update message, the upd sync variable needs to be updated to true, for particular AFI/SAFI
 * combination. Currently we only assume Unicast SAFI. From the Update message we have to extract the AFI. Each
 * Update message can contain BGP Object with one type of AFI. If the object is BGP Link, BGP Node or a BGPPrefix
 * the AFI is Linkstate. In case of BGPRoute, the AFI depends on the IP Address of the prefix.
 *
 * @param msg received Update message
 */
public void updReceived(final Update msg) {
    TablesKey type = new TablesKey(Ipv4AddressFamily.class, UnicastSubsequentAddressFamily.class);
    boolean isEOR = false;
    if (msg.getNlri() == null && msg.getWithdrawnRoutes() == null) {
        if (msg.getAttributes() != null) {
            if (msg.getAttributes().getAugmentation(Attributes1.class) != null) {
                final Attributes1 pa = msg.getAttributes().getAugmentation(Attributes1.class);
                if (pa.getMpReachNlri() != null) {
                    type = new TablesKey(pa.getMpReachNlri().getAfi(), pa.getMpReachNlri().getSafi());
                }
            } else if (msg.getAttributes().getAugmentation(Attributes2.class) != null) {
                final Attributes2 pa = msg.getAttributes().getAugmentation(Attributes2.class);
                if (pa.getMpUnreachNlri() != null) {
                    type = new TablesKey(pa.getMpUnreachNlri().getAfi(), pa.getMpUnreachNlri().getSafi());
                }
                if (pa.getMpUnreachNlri().getWithdrawnRoutes() == null) {
                    // EOR message contains only MPUnreach attribute and no NLRI
                    isEOR = true;
                }
            }
        } else {
            // true for empty Update Message
            isEOR = true;
        }
    }
    syncType(type, isEOR);
}

Example 75 with Prefix

use of org.opendaylight.yang.gen.v1.urn.tbd.params.xml.ns.yang.nt.l3.unicast.igp.topology.rev131021.igp.node.attributes.igp.node.attributes.Prefix in project bgpcep by opendaylight.

the class SrAttributeParserTest method testIpv6SrPrefix.

// https://tools.ietf.org/html/draft-gredler-idr-bgp-ls-segment-routing-ext-02#section-2.3.2
@Test
public void testIpv6SrPrefix() {
    final byte[] bytes = { 0, 0, 0 };
    final Ipv6SrPrefix prefix = new Ipv6SrPrefixBuilder().setAlgorithm(Algorithm.ShortestPathFirst).build();
    assertEquals(prefix, Ipv6SrPrefixAttributesParser.parseSrIpv6Prefix(Unpooled.wrappedBuffer(bytes)));
    final ByteBuf serializedPrefix = Unpooled.buffer();
    Ipv6SrPrefixAttributesParser.serializeIpv6SrPrefix(prefix, serializedPrefix);
    assertArrayEquals(bytes, ByteArray.readAllBytes(serializedPrefix));
}