Examples with PortNumber org.openkilda.rulemanager.ProtoConstants.PortNumber used on opensource projects

Example 46 with PortNumber

use of org.openkilda.rulemanager.ProtoConstants.PortNumber in project open-kilda by telstra.

the class UnicastVerificationVxlanRuleGenerator method buildUnicastVerificationRuleVxlan.

private FlowSpeakerData buildUnicastVerificationRuleVxlan(Switch sw, Cookie cookie) {
    List<Action> actions = new ArrayList<>();
    if (sw.getFeatures().contains(NOVIFLOW_PUSH_POP_VXLAN)) {
        actions.add(new PopVxlanAction(ActionType.POP_VXLAN_NOVIFLOW));
    } else {
        actions.add(new PopVxlanAction(ActionType.POP_VXLAN_OVS));
    }
    actions.add(new PortOutAction(new PortNumber(SpecialPortType.CONTROLLER)));
    // todo remove unnecessary action
    actions.add(SetFieldAction.builder().field(ETH_DST).value(sw.getSwitchId().toLong()).build());
    Instructions instructions = Instructions.builder().applyActions(actions).build();
    long ethSrc = new SwitchId(config.getFlowPingMagicSrcMacAddress()).toLong();
    Set<FieldMatch> match = Sets.newHashSet(FieldMatch.builder().field(ETH_SRC).value(ethSrc).mask(NO_MASK).build(), FieldMatch.builder().field(ETH_DST).value(sw.getSwitchId().toLong()).mask(NO_MASK).build(), FieldMatch.builder().field(ETH_TYPE).value(EthType.IPv4).build(), FieldMatch.builder().field(IP_PROTO).value(IpProto.UDP).build(), FieldMatch.builder().field(UDP_SRC).value(STUB_VXLAN_UDP_SRC).build());
    return FlowSpeakerData.builder().switchId(sw.getSwitchId()).ofVersion(OfVersion.of(sw.getOfVersion())).cookie(cookie).table(OfTable.INPUT).priority(VERIFICATION_RULE_VXLAN_PRIORITY).match(match).instructions(instructions).build();
}

Example 47 with PortNumber

use of org.openkilda.rulemanager.ProtoConstants.PortNumber in project open-kilda by telstra.

the class MultiTableIngressRuleGeneratorTest method buildCommandsVlanEncapsulationDoubleVlanPortOverlappingTest.

@Test
public void buildCommandsVlanEncapsulationDoubleVlanPortOverlappingTest() {
    Flow oneSwitchFlow = buildFlow(ONE_SWITCH_PATH, OUTER_VLAN_ID_2, 0);
    Set<FlowSideAdapter> overlapping = Sets.newHashSet(FlowSideAdapter.makeIngressAdapter(oneSwitchFlow, ONE_SWITCH_PATH));
    Flow flow = buildFlow(PATH, OUTER_VLAN_ID_1, INNER_VLAN_ID_1);
    MultiTableIngressRuleGenerator generator = buildGenerator(PATH, flow, VLAN_ENCAPSULATION, overlapping);
    List<SpeakerData> commands = generator.generateCommands(SWITCH_1);
    assertEquals(3, commands.size());
    FlowSpeakerData ingressCommand = (FlowSpeakerData) commands.get(0);
    FlowSpeakerData preIngressCommand = (FlowSpeakerData) commands.get(1);
    MeterSpeakerData meterCommand = (MeterSpeakerData) commands.get(2);
    assertEquals(newArrayList(meterCommand.getUuid()), new ArrayList<>(ingressCommand.getDependsOn()));
    RoutingMetadata ingressMetadata = RoutingMetadata.builder().outerVlanId(OUTER_VLAN_ID_1).build(SWITCH_1.getFeatures());
    Set<FieldMatch> expectedIngressMatch = Sets.newHashSet(FieldMatch.builder().field(Field.IN_PORT).value(PORT_NUMBER_1).build(), FieldMatch.builder().field(Field.VLAN_VID).value(INNER_VLAN_ID_1).build(), FieldMatch.builder().field(Field.METADATA).value(ingressMetadata.getValue()).mask(ingressMetadata.getMask()).build());
    List<Action> expectedIngressActions = newArrayList(SetFieldAction.builder().field(Field.VLAN_VID).value(TRANSIT_VLAN_ID).build(), new PortOutAction(new PortNumber(PORT_NUMBER_2)));
    Set<FieldMatch> expectedPreIngressMatch = Sets.newHashSet(FieldMatch.builder().field(Field.IN_PORT).value(PORT_NUMBER_1).build(), FieldMatch.builder().field(Field.VLAN_VID).value(OUTER_VLAN_ID_1).build());
    FlowSharedSegmentCookie preIngressCookie = FlowSharedSegmentCookie.builder(SharedSegmentType.QINQ_OUTER_VLAN).portNumber(PORT_NUMBER_1).vlanId(OUTER_VLAN_ID_1).build();
    RoutingMetadata preIngressMetadata = RoutingMetadata.builder().outerVlanId(OUTER_VLAN_ID_1).build(SWITCH_1.getFeatures());
    assertPreIngressCommand(preIngressCommand, preIngressCookie, Priority.FLOW_PRIORITY, expectedPreIngressMatch, newArrayList(new PopVlanAction()), mapMetadata(preIngressMetadata));
    assertIngressCommand(ingressCommand, Priority.DOUBLE_VLAN_FLOW_PRIORITY, expectedIngressMatch, expectedIngressActions, METER_ID, null);
    assertMeterCommand(meterCommand);
}

Example 48 with PortNumber

use of org.openkilda.rulemanager.ProtoConstants.PortNumber in project open-kilda by telstra.

the class Server42IslRttTurningRuleGeneratorTest method server42IslRttTurningRuleGeneratorTest.

@Test
public void server42IslRttTurningRuleGeneratorTest() {
    Switch sw = buildSwitch("OF_13", Sets.newHashSet(NOVIFLOW_COPY_FIELD));
    List<SpeakerData> commands = generator.generateCommands(sw);
    assertEquals(1, commands.size());
    FlowSpeakerData flowCommandData = getCommand(FlowSpeakerData.class, commands);
    assertEquals(sw.getSwitchId(), flowCommandData.getSwitchId());
    assertEquals(sw.getOfVersion(), flowCommandData.getOfVersion().toString());
    assertTrue(flowCommandData.getDependsOn().isEmpty());
    assertEquals(new Cookie(SERVER_42_ISL_RTT_TURNING_COOKIE), flowCommandData.getCookie());
    assertEquals(OfTable.INPUT, flowCommandData.getTable());
    assertEquals(SERVER_42_ISL_RTT_TURNING_PRIORITY, flowCommandData.getPriority());
    Set<FieldMatch> expectedMatch = Sets.newHashSet(FieldMatch.builder().field(Field.ETH_DST).value(MAC_ADDRESS.toLong()).build(), FieldMatch.builder().field(Field.ETH_TYPE).value(EthType.IPv4).build(), FieldMatch.builder().field(Field.IP_PROTO).value(IpProto.UDP).build(), FieldMatch.builder().field(Field.UDP_SRC).value(SERVER_42_ISL_RTT_FORWARD_UDP_PORT).build());
    assertEquals(expectedMatch, flowCommandData.getMatch());
    List<Action> expectedApplyActions = Lists.newArrayList(SetFieldAction.builder().field(Field.UDP_SRC).value(SERVER_42_ISL_RTT_REVERSE_UDP_PORT).build(), new PortOutAction(new PortNumber(SpecialPortType.IN_PORT)));
    Instructions expectedInstructions = Instructions.builder().applyActions(expectedApplyActions).build();
    assertEquals(expectedInstructions, flowCommandData.getInstructions());
}

Example 49 with PortNumber

use of org.openkilda.rulemanager.ProtoConstants.PortNumber in project open-kilda by telstra.

the class OfInstructionsConverter method convertToRuleManagerAction.

/**
 * Converts action.
 */
public Action convertToRuleManagerAction(OFAction action) {
    switch(action.getType()) {
        case PUSH_VLAN:
            return new PushVlanAction();
        case POP_VLAN:
            return new PopVlanAction();
        case METER:
            OFActionMeter meterAction = (OFActionMeter) action;
            MeterId meterId = new MeterId(meterAction.getMeterId());
            return new MeterAction(meterId);
        case GROUP:
            OFActionGroup groupAction = (OFActionGroup) action;
            GroupId groupId = new GroupId(groupAction.getGroup().getGroupNumber());
            return new GroupAction(groupId);
        case OUTPUT:
            OFActionOutput outputAction = (OFActionOutput) action;
            PortNumber portNumber = convertPort(outputAction.getPort());
            return new PortOutAction(portNumber);
        case EXPERIMENTER:
            if (action instanceof OFActionNoviflowPushVxlanTunnel) {
                OFActionNoviflowPushVxlanTunnel pushNoviVxlan = (OFActionNoviflowPushVxlanTunnel) action;
                return PushVxlanAction.builder().type(ActionType.PUSH_VXLAN_NOVIFLOW).vni((int) pushNoviVxlan.getVni()).srcMacAddress(convertMac(pushNoviVxlan.getEthSrc())).dstMacAddress(convertMac(pushNoviVxlan.getEthDst())).srcIpv4Address(convertIPv4Address(pushNoviVxlan.getIpv4Src())).dstIpv4Address(convertIPv4Address(pushNoviVxlan.getIpv4Dst())).udpSrc(pushNoviVxlan.getUdpSrc()).build();
            } else if (action instanceof OFActionKildaPushVxlanField) {
                OFActionKildaPushVxlanField pushKildaVxlan = (OFActionKildaPushVxlanField) action;
                return PushVxlanAction.builder().type(ActionType.PUSH_VXLAN_OVS).vni((int) pushKildaVxlan.getVni()).srcMacAddress(convertMac(pushKildaVxlan.getEthSrc())).dstMacAddress(convertMac(pushKildaVxlan.getEthDst())).srcIpv4Address(convertIPv4Address(pushKildaVxlan.getIpv4Src())).dstIpv4Address(convertIPv4Address(pushKildaVxlan.getIpv4Dst())).udpSrc(pushKildaVxlan.getUdpSrc()).build();
            } else if (action instanceof OFActionNoviflowCopyField) {
                OFActionNoviflowCopyField copyField = (OFActionNoviflowCopyField) action;
                return CopyFieldAction.builder().numberOfBits(copyField.getNBits()).srcOffset(copyField.getSrcOffset()).dstOffset(copyField.getDstOffset()).oxmSrcHeader(convertOxmHeader(copyField.getOxmSrcHeader())).oxmDstHeader(convertOxmHeader(copyField.getOxmDstHeader())).build();
            } else if (action instanceof OFActionNoviflowSwapField) {
                OFActionNoviflowSwapField swapField = (OFActionNoviflowSwapField) action;
                return SwapFieldAction.builder().type(ActionType.NOVI_SWAP_FIELD).numberOfBits(swapField.getNBits()).srcOffset(swapField.getSrcOffset()).dstOffset(swapField.getDstOffset()).oxmSrcHeader(convertOxmHeader(swapField.getOxmSrcHeader())).oxmDstHeader(convertOxmHeader(swapField.getOxmDstHeader())).build();
            } else if (action instanceof OFActionKildaSwapField) {
                OFActionKildaSwapField swapField = (OFActionKildaSwapField) action;
                return SwapFieldAction.builder().type(ActionType.KILDA_SWAP_FIELD).numberOfBits(swapField.getNBits()).srcOffset(swapField.getSrcOffset()).dstOffset(swapField.getDstOffset()).oxmSrcHeader(convertOxmHeader(swapField.getOxmSrcHeader())).oxmDstHeader(convertOxmHeader(swapField.getOxmDstHeader())).build();
            } else if (action instanceof OFActionNoviflowPopVxlanTunnel) {
                return new PopVxlanAction(ActionType.POP_VXLAN_NOVIFLOW);
            } else if (action instanceof OFActionKildaPopVxlanField) {
                return new PopVxlanAction(ActionType.POP_VXLAN_OVS);
            } else {
                throw new IllegalStateException(format("Unknown experimenter action %s", action.getType()));
            }
        case SET_FIELD:
            OFActionSetField setFieldAction = (OFActionSetField) action;
            return convertOxm(setFieldAction.getField());
        case SET_VLAN_VID:
            OFActionSetVlanVid setVlanVid = (OFActionSetVlanVid) action;
            return SetFieldAction.builder().field(Field.VLAN_VID).value(setVlanVid.getVlanVid().getVlan()).build();
        default:
            throw new IllegalStateException(format("Unknown action type %s", action.getType()));
    }
}

Example 50 with PortNumber

use of org.openkilda.rulemanager.ProtoConstants.PortNumber in project open-kilda by telstra.

the class FlowLoopTransitRuleGeneratorTest method assertTransitCommands.

private void assertTransitCommands(List<SpeakerData> commands, OfTable table, FlowTransitEncapsulation encapsulation) {
    assertEquals(1, commands.size());
    FlowSpeakerData flowCommandData = getCommand(FlowSpeakerData.class, commands);
    assertEquals(SWITCH_2.getSwitchId(), flowCommandData.getSwitchId());
    assertEquals(SWITCH_2.getOfVersion(), flowCommandData.getOfVersion().toString());
    assertTrue(flowCommandData.getDependsOn().isEmpty());
    assertEquals(LOOP_COOKIE, flowCommandData.getCookie());
    assertEquals(table, flowCommandData.getTable());
    assertEquals(Priority.LOOP_FLOW_PRIORITY, flowCommandData.getPriority());
    Set<FieldMatch> expectedMatch;
    List<Action> expectedApplyActions = new ArrayList<>();
    if (encapsulation.getType().equals(FlowEncapsulationType.TRANSIT_VLAN)) {
        expectedMatch = buildExpectedVlanMatch(PORT_NUMBER_1, encapsulation.getId());
    } else {
        expectedMatch = buildExpectedVxlanMatch(PORT_NUMBER_1, encapsulation.getId());
        expectedApplyActions.add(SetFieldAction.builder().field(Field.ETH_SRC).value(SWITCH_ID_2.getId()).build());
        expectedApplyActions.add(SetFieldAction.builder().field(Field.ETH_DST).value(SWITCH_ID_1.getId()).build());
    }
    assertEqualsMatch(expectedMatch, flowCommandData.getMatch());
    expectedApplyActions.add(new PortOutAction(new PortNumber(SpecialPortType.IN_PORT)));
    Instructions expectedInstructions = Instructions.builder().applyActions(expectedApplyActions).build();
    assertEquals(expectedInstructions, flowCommandData.getInstructions());
    assertTrue(flowCommandData.getFlags().isEmpty());
}