Examples with ComponentData alma.acs.monitoring.DAO.ComponentData used on opensource projects

Example 1 with ComponentData

use of alma.acs.monitoring.DAO.ComponentData in project ACS by ACS-Community.

the class BlobberWorkerUnitTest method testCorrelatorULongLong.

public void testCorrelatorULongLong() throws Exception {
    // was 0, which is now illegal
    blobber.setCollectorIntervalSeconds(1);
    getTestWorker().setCanHandle(true);
    // Collector "TestCollector" is just a dummy to trick the worker to believe that 
    // there is a collector registered and start operating. "TestCollector" is not used at all.
    // The TestBlobberWorker creates its own single collector from which the blobber worker will get data. 
    getTestWorker().addCollector("TestCollector");
    String componentName = "CONTROL/DV01/PSA";
    String serialNumber = "3456328928847";
    String propertyName = "VOLTAGE_MID_1";
    // Note that CORBA ulonglong means Java long.
    Any anyUp = create_any();
    long[] dataArrayUp1 = { 1, 2, 3 };
    long[] dataArrayUp2 = { 11, 12, 13 };
    long[] dataArrayUp3 = { 21, 22, 23 };
    long[][] dataUpMatrix = { dataArrayUp1, dataArrayUp2, dataArrayUp3 };
    String[] serialNumbers = { "A", "B", "C" };
    uLongLongSeqBlobData[] dataUp = new uLongLongSeqBlobData[dataUpMatrix.length];
    int index = 0;
    for (long[] value : dataUpMatrix) {
        dataUp[index] = new uLongLongSeqBlobData(BASE_TIME + index, value);
        index++;
    }
    uLongLongSeqBlobDataSeqHelper.insert(anyUp, dataUp);
    MonitorBlob blobUp = new MonitorBlob(false, (short) 0, serialNumbers, "wrong:" + propertyName, anyUp);
    MonitorBlob[] blobs = new MonitorBlob[1];
    blobs[0] = blobUp;
    long startTime = BASE_TIME + 100;
    long stopTime = BASE_TIME + 101;
    MonitorDataBlock block = new MonitorDataBlock(startTime, stopTime, componentName, serialNumber, blobs);
    MonitorDataBlock[] blocks = new MonitorDataBlock[1];
    blocks[0] = block;
    getTestWorker().getCollector().setMonitorData(blocks);
    ComponentData data = getTestWorker().fetchData();
    String clob = BASE_TIME + "|1|" + (BASE_TIME + 1) + "|11|" + (BASE_TIME + 2) + "|21\n";
    checkData(data, clob, 3, componentName, propertyName, "A", startTime, stopTime);
    checkStatistics(data, 1.0, 21.0, 11.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|2|" + (BASE_TIME + 1) + "|12|" + (BASE_TIME + 2) + "|22\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "B", startTime, stopTime);
    checkStatistics(data, 2.0, 22.0, 12.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|3|" + (BASE_TIME + 1) + "|13|" + (BASE_TIME + 2) + "|23\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "C", startTime, stopTime);
    checkStatistics(data, 3.0, 23.0, 13.0, 10.0);
}

Example 2 with ComponentData

use of alma.acs.monitoring.DAO.ComponentData in project ACS by ACS-Community.

the class BlobberWorkerUnitTest method testCorrelatorHandling.

public void testCorrelatorHandling() throws Exception {
    blobber.setCollectorIntervalSeconds(100);
    getTestWorker().setCanHandle(true);
    // Collector "TestCase" is just a dummy name to trick the worker to believe that 
    // there is a collector registered and start operating. "TestCase" is not used at all.
    getTestWorker().addCollector("TestCase");
    String componentName = "CONTROL/DV01/PSA";
    String serialNumber = "3456328928847";
    String propertyName = "VOLTAGE_MID_1";
    Any anyUp = create_any();
    double[] doubleDataUp1 = { 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0 };
    double[] doubleDataUp2 = { 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0 };
    double[] doubleDataUp3 = { 21.0, 22.0, 23.0, 24.0, 25.0, 26.0, 27.0, 28.0, 29.0, 30.0 };
    double[][] doubleDataUpMatrix = { doubleDataUp1, doubleDataUp2, doubleDataUp3 };
    String[] serialNumbers = { "A", "B", "C", "D", "E", "F", "G", "H", "I", "J" };
    doubleSeqBlobData[] dataUp = createDoubleSeqBlobData(doubleDataUpMatrix);
    doubleSeqBlobDataSeqHelper.insert(anyUp, dataUp);
    MonitorBlob blobUp = new MonitorBlob(false, (short) 0, serialNumbers, "wrong:" + propertyName, anyUp);
    MonitorBlob[] blobs = new MonitorBlob[1];
    blobs[0] = blobUp;
    long startTime = BASE_TIME + 100;
    long stopTime = BASE_TIME + 101;
    MonitorDataBlock block = new MonitorDataBlock(startTime, stopTime, componentName, serialNumber, blobs);
    MonitorDataBlock[] blocks = new MonitorDataBlock[1];
    blocks[0] = block;
    getTestWorker().getCollector().setMonitorData(blocks);
    m_logger.fine("About to call getTestWorker().fetchData()");
    ComponentData data = getTestWorker().fetchData();
    String clob = BASE_TIME + "|1.0|" + (BASE_TIME + 1) + "|11.0|" + (BASE_TIME + 2) + "|21.0\n";
    checkData(data, clob, 3, componentName, propertyName, "A", startTime, stopTime);
    checkStatistics(data, 1.0, 21.0, 11.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|2.0|" + (BASE_TIME + 1) + "|12.0|" + (BASE_TIME + 2) + "|22.0\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "B", startTime, stopTime);
    checkStatistics(data, 2.0, 22.0, 12.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|3.0|" + (BASE_TIME + 1) + "|13.0|" + (BASE_TIME + 2) + "|23.0\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "C", startTime, stopTime);
    checkStatistics(data, 3.0, 23.0, 13.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|4.0|" + (BASE_TIME + 1) + "|14.0|" + (BASE_TIME + 2) + "|24.0\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "D", startTime, stopTime);
    checkStatistics(data, 4.0, 24.0, 14.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|5.0|" + (BASE_TIME + 1) + "|15.0|" + (BASE_TIME + 2) + "|25.0\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "E", startTime, stopTime);
    checkStatistics(data, 5.0, 25.0, 15.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|6.0|" + (BASE_TIME + 1) + "|16.0|" + (BASE_TIME + 2) + "|26.0\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "F", startTime, stopTime);
    checkStatistics(data, 6.0, 26.0, 16.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|7.0|" + (BASE_TIME + 1) + "|17.0|" + (BASE_TIME + 2) + "|27.0\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "G", startTime, stopTime);
    checkStatistics(data, 7.0, 27.0, 17.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|8.0|" + (BASE_TIME + 1) + "|18.0|" + (BASE_TIME + 2) + "|28.0\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "H", startTime, stopTime);
    checkStatistics(data, 8.0, 28.0, 18.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|9.0|" + (BASE_TIME + 1) + "|19.0|" + (BASE_TIME + 2) + "|29.0\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "I", startTime, stopTime);
    checkStatistics(data, 9.0, 29.0, 19.0, 10.0);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|10.0|" + (BASE_TIME + 1) + "|20.0|" + (BASE_TIME + 2) + "|30.0\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "J", startTime, stopTime);
    checkStatistics(data, 10.0, 30.0, 20.0, 10.0);
}

Example 3 with ComponentData

use of alma.acs.monitoring.DAO.ComponentData in project ACS by ACS-Community.

the class BlobberWorkerUnitTest method testTimestamps.

public void testTimestamps() throws Exception {
    // was 0, which is now illegal
    blobber.setCollectorIntervalSeconds(1);
    getTestWorker().setCanHandle(true);
    // Collector "TestCollector" is just a dummy to trick the worker to believe that 
    // there is a collector registered and start operating. "TestCollector" is not used at all.
    // The TestBlobberWorker creates its own single collector from which the blobber worker will get data. 
    getTestWorker().addCollector("TestCollector");
    String componentName = "CONTROL/DV01/PSA";
    String serialNumber = "3456328928847";
    String propertyName = "VOLTAGE_MID_1";
    long startTime1 = BASE_TIME + 2000000;
    long stopTime1 = BASE_TIME + 2010000;
    Any anyUp = create_any();
    int[] dataArrayUp1 = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
    enumBlobData[] dataUp = new enumBlobData[dataArrayUp1.length];
    int index = 0;
    for (int value : dataArrayUp1) {
        dataUp[index] = new enumBlobData(startTime1 + index, value);
        index++;
    }
    enumBlobDataSeqHelper.insert(anyUp, dataUp);
    MonitorBlob blobUp = new MonitorBlob(false, (short) 0, null, "wrong:" + propertyName, anyUp);
    MonitorBlob[] blobs = new MonitorBlob[1];
    blobs[0] = blobUp;
    MonitorDataBlock block = new MonitorDataBlock(startTime1, stopTime1, componentName, serialNumber, blobs);
    MonitorDataBlock[] blocks = new MonitorDataBlock[1];
    blocks[0] = block;
    blobber.setCollectorIntervalSeconds(2);
    getTestWorker().getCollector().setMonitorData(blocks);
    long startTime2 = BASE_TIME + 4000000;
    long stopTime2 = BASE_TIME + 4010000;
    anyUp = create_any();
    int[] dataArrayUp2 = { 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 };
    dataUp = new enumBlobData[dataArrayUp2.length];
    index = 0;
    for (int value : dataArrayUp2) {
        dataUp[index] = new enumBlobData(startTime2 + index, value);
        index++;
    }
    enumBlobDataSeqHelper.insert(anyUp, dataUp);
    blobUp = new MonitorBlob(false, (short) 0, null, "wrong:" + propertyName, anyUp);
    blobs = new MonitorBlob[1];
    blobs[0] = blobUp;
    block = new MonitorDataBlock(startTime2, stopTime2, componentName, serialNumber, blobs);
    blocks = new MonitorDataBlock[1];
    blocks[0] = block;
    getTestWorker().getCollector().setMonitorData(blocks);
    ComponentData data = getTestWorker().fetchData();
    String clob = startTime1 + "|1|" + (startTime1 + 1) + "|2|" + (startTime1 + 2) + "|3|" + (startTime1 + 3) + "|4|" + (startTime1 + 4) + "|5|" + (startTime1 + 5) + "|6|" + (startTime1 + 6) + "|7|" + (startTime1 + 7) + "|8|" + (startTime1 + 8) + "|9|" + (startTime1 + 9) + "|10\n";
    checkData(data, clob, 10, componentName, propertyName, serialNumber, startTime1, stopTime1);
    checkStatistics(data);
    data = getTestWorker().fetchData();
    clob = startTime2 + "|11|" + (startTime2 + 1) + "|12|" + (startTime2 + 2) + "|13|" + (startTime2 + 3) + "|14|" + (startTime2 + 4) + "|15|" + (startTime2 + 5) + "|16|" + (startTime2 + 6) + "|17|" + (startTime2 + 7) + "|18|" + (startTime2 + 8) + "|19|" + (startTime2 + 9) + "|20\n";
    checkData(data, clob, 10, componentName, propertyName, serialNumber, startTime2, stopTime2);
    checkStatistics(data);
    long startTime3 = BASE_TIME + 6000000;
    long stopTime3 = BASE_TIME + 6010000;
    anyUp = create_any();
    int[] dataArrayUp3 = { 21, 22, 23, 24, 25, 26, 27, 28, 29, 20 };
    dataUp = new enumBlobData[dataArrayUp3.length];
    index = 0;
    for (int value : dataArrayUp3) {
        dataUp[index] = new enumBlobData(startTime3 + index, value);
        index++;
    }
    enumBlobDataSeqHelper.insert(anyUp, dataUp);
    blobUp = new MonitorBlob(false, (short) 0, null, "wrong:" + propertyName, anyUp);
    blobs = new MonitorBlob[1];
    blobs[0] = blobUp;
    block = new MonitorDataBlock(startTime3, stopTime3, componentName, serialNumber, blobs);
    blocks = new MonitorDataBlock[1];
    blocks[0] = block;
    //blobber.setCollectorIntervalSeconds(0);
    getTestWorker().getCollector().setMonitorData(blocks);
    data = getTestWorker().fetchData();
    clob = startTime3 + "|21|" + (startTime3 + 1) + "|22|" + (startTime3 + 2) + "|23|" + (startTime3 + 3) + "|24|" + (startTime3 + 4) + "|25|" + (startTime3 + 5) + "|26|" + (startTime3 + 6) + "|27|" + (startTime3 + 7) + "|28|" + (startTime3 + 8) + "|29|" + (startTime3 + 9) + "|20\n";
    checkData(data, clob, 10, componentName, propertyName, serialNumber, startTime3, stopTime3);
    checkStatistics(data);
}

Example 4 with ComponentData

use of alma.acs.monitoring.DAO.ComponentData in project ACS by ACS-Community.

the class BlobberWorkerUnitTest method testCorrelatorString.

public void testCorrelatorString() throws Exception {
    // was 0, which is now illegal
    blobber.setCollectorIntervalSeconds(1);
    getTestWorker().setCanHandle(true);
    // Collector "TestCollector" is just a dummy to trick the worker to believe that 
    // there is a collector registered and start operating. "TestCollector" is not used at all.
    // The TestBlobberWorker creates its own single collector from which the blobber worker will get data. 
    getTestWorker().addCollector("TestCollector");
    String componentName = "CONTROL/DV01/PSA";
    String serialNumber = "3456328928847";
    String propertyName = "VOLTAGE_MID_1";
    // Note that CORBA ulonglong means Java long.
    Any anyUp = create_any();
    String[] dataArrayUp1 = { "R", "S", "T" };
    String[] dataArrayUp2 = { "U", "V", "W" };
    String[] dataArrayUp3 = { "X", "Y", "Z" };
    String[][] dataUpMatrix = { dataArrayUp1, dataArrayUp2, dataArrayUp3 };
    String[] serialNumbers = { "A", "B", "C" };
    stringSeqBlobData[] dataUp = new stringSeqBlobData[dataUpMatrix.length];
    int index = 0;
    for (String[] value : dataUpMatrix) {
        dataUp[index] = new stringSeqBlobData(BASE_TIME + index, value);
        index++;
    }
    stringSeqBlobDataSeqHelper.insert(anyUp, dataUp);
    MonitorBlob blobUp = new MonitorBlob(false, (short) 0, serialNumbers, "wrong:" + propertyName, anyUp);
    MonitorBlob[] blobs = new MonitorBlob[1];
    blobs[0] = blobUp;
    long startTime = BASE_TIME + 100;
    long stopTime = BASE_TIME + 101;
    MonitorDataBlock block = new MonitorDataBlock(startTime, stopTime, componentName, serialNumber, blobs);
    MonitorDataBlock[] blocks = new MonitorDataBlock[1];
    blocks[0] = block;
    getTestWorker().getCollector().setMonitorData(blocks);
    ComponentData data = getTestWorker().fetchData();
    String clob = BASE_TIME + "|R|" + (BASE_TIME + 1) + "|U|" + (BASE_TIME + 2) + "|X\n";
    checkData(data, clob, 3, componentName, propertyName, "A", startTime, stopTime);
    checkStatistics(data);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|S|" + (BASE_TIME + 1) + "|V|" + (BASE_TIME + 2) + "|Y\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "B", startTime, stopTime);
    checkStatistics(data);
    data = getTestWorker().fetchData();
    clob = BASE_TIME + "|T|" + (BASE_TIME + 1) + "|W|" + (BASE_TIME + 2) + "|Z\n";
    propertyName = "" + propertyName;
    checkData(data, clob, 3, componentName, propertyName, "C", startTime, stopTime);
    checkStatistics(data);
}

Example 5 with ComponentData

use of alma.acs.monitoring.DAO.ComponentData in project ACS by ACS-Community.

the class BlobberWorkerUnitTest method testStandardEnum.

public void testStandardEnum() throws Exception {
    // was 0, which is now illegal
    blobber.setCollectorIntervalSeconds(1);
    getTestWorker().setCanHandle(true);
    // Collector "TestCollector" is just a dummy to trick the worker to believe that 
    // there is a collector registered and start operating. "TestCollector" is not used at all.
    // The TestBlobberWorker creates its own single collector from which the blobber worker will get data. 
    getTestWorker().addCollector("TestCollector");
    String componentName = "CONTROL/DV01/PSA";
    String serialNumber = "3456328928847";
    String propertyName = "VOLTAGE_MID_1";
    Any anyUp = create_any();
    int[] dataArrayUp = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
    enumBlobData[] dataUp = new enumBlobData[dataArrayUp.length];
    int index = 0;
    for (int value : dataArrayUp) {
        dataUp[index] = new enumBlobData(BASE_TIME + index, value);
        index++;
    }
    enumBlobDataSeqHelper.insert(anyUp, dataUp);
    MonitorBlob blobUp = new MonitorBlob(false, (short) 0, null, "wrong:" + propertyName, anyUp);
    MonitorBlob[] blobs = new MonitorBlob[1];
    blobs[0] = blobUp;
    long startTime = BASE_TIME + 100;
    long stopTime = BASE_TIME + 101;
    MonitorDataBlock block = new MonitorDataBlock(startTime, stopTime, componentName, serialNumber, blobs);
    MonitorDataBlock[] blocks = new MonitorDataBlock[1];
    blocks[0] = block;
    getTestWorker().getCollector().setMonitorData(blocks);
    ComponentData data = getTestWorker().fetchData();
    String clob = BASE_TIME + "|1|" + (BASE_TIME + 1) + "|2|" + (BASE_TIME + 2) + "|3|" + (BASE_TIME + 3) + "|4|" + (BASE_TIME + 4) + "|5|" + (BASE_TIME + 5) + "|6|" + (BASE_TIME + 6) + "|7|" + (BASE_TIME + 7) + "|8|" + (BASE_TIME + 8) + "|9|" + (BASE_TIME + 9) + "|10\n";
    checkData(data, clob, 10, componentName, propertyName, serialNumber, startTime, stopTime);
    checkStatistics(data);
}