Examples with MeterRecord com.eveningoutpost.dexdrip.ImportedLibraries.dexcom.records.MeterRecord used on opensource projects

Example 1 with MeterRecord

use of com.eveningoutpost.dexdrip.ImportedLibraries.dexcom.records.MeterRecord in project xDrip by NightscoutFoundation.

the class ReadDataShare method ParsePage.

private <T> T ParsePage(byte[] data, int recordType, Action1<T> parsedPageReceiver) {
    int HEADER_LEN = 28;
    PageHeader pageHeader = new PageHeader(data);
    int NUM_REC_OFFSET = 4;
    int numRec = data[NUM_REC_OFFSET];
    int rec_len;
    switch(Constants.RECORD_TYPES.values()[recordType]) {
        case MANUFACTURING_DATA:
            GenericXMLRecord xmlRecord = new GenericXMLRecord(Arrays.copyOfRange(data, HEADER_LEN, data.length - 1));
            if (parsedPageReceiver != null) {
                Observable.just((T) xmlRecord).subscribe(parsedPageReceiver);
            } else {
                return (T) xmlRecord;
            }
            break;
        case SENSOR_DATA:
            rec_len = 20;
            SensorRecord[] sensorRecords = new SensorRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                sensorRecords[i] = new SensorRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            if (parsedPageReceiver != null) {
                Observable.just((T) sensorRecords).subscribe(parsedPageReceiver);
            } else {
                return (T) sensorRecords;
            }
            break;
        case EGV_DATA:
            rec_len = 13;
            EGVRecord[] egvRecords = new EGVRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                egvRecords[i] = new EGVRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            if (parsedPageReceiver != null) {
                Observable.just((T) egvRecords).subscribe(parsedPageReceiver);
            } else {
                return (T) egvRecords;
            }
            break;
        case METER_DATA:
            rec_len = 16;
            MeterRecord[] meterRecords = new MeterRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                meterRecords[i] = new MeterRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            if (parsedPageReceiver != null) {
                Observable.just((T) meterRecords).subscribe(parsedPageReceiver);
            } else {
                return (T) meterRecords;
            }
            break;
        case CAL_SET:
            rec_len = 249;
            if (pageHeader.getRevision() <= 2) {
                rec_len = 148;
            }
            CalRecord[] calRecords = new CalRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                calRecords[i] = new CalRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            if (parsedPageReceiver != null) {
                Observable.just((T) calRecords).subscribe(parsedPageReceiver);
            } else {
                return (T) calRecords;
            }
            break;
        default:
            break;
    }
    Observable.just((T) null).subscribe(parsedPageReceiver);
    return (T) null;
}

Example 2 with MeterRecord

use of com.eveningoutpost.dexdrip.ImportedLibraries.dexcom.records.MeterRecord in project xDrip by NightscoutFoundation.

the class ReadData method ParsePage.

private <T> T ParsePage(byte[] data, int recordType) {
    int HEADER_LEN = 28;
    PageHeader pageHeader = new PageHeader(data);
    int NUM_REC_OFFSET = 4;
    int numRec = data[NUM_REC_OFFSET];
    int rec_len;
    switch(Dex_Constants.RECORD_TYPES.values()[recordType]) {
        case MANUFACTURING_DATA:
            GenericXMLRecord xmlRecord = new GenericXMLRecord(Arrays.copyOfRange(data, HEADER_LEN, data.length - 1));
            return (T) xmlRecord;
        case SENSOR_DATA:
            rec_len = 20;
            SensorRecord[] sensorRecords = new SensorRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                sensorRecords[i] = new SensorRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            return (T) sensorRecords;
        case EGV_DATA:
            rec_len = 13;
            EGVRecord[] egvRecords = new EGVRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                egvRecords[i] = new EGVRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            return (T) egvRecords;
        case METER_DATA:
            rec_len = 16;
            MeterRecord[] meterRecords = new MeterRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                meterRecords[i] = new MeterRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            return (T) meterRecords;
        case CAL_SET:
            rec_len = 249;
            if (pageHeader.getRevision() <= 2) {
                rec_len = 148;
            }
            CalRecord[] calRecords = new CalRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                calRecords[i] = new CalRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            return (T) calRecords;
        default:
            // Throw error "Database record not supported"
            break;
    }
    return (T) null;
}

Example 3 with MeterRecord

use of com.eveningoutpost.dexdrip.ImportedLibraries.dexcom.records.MeterRecord in project xDrip-plus by jamorham.

the class SyncingService method sync.

private void sync(int numOfPages) {
    boolean broadcastSent;
    if (acquireSerialDevice()) {
        try {
            ReadData readData = new ReadData(mSerialDevice);
            // TODO: need to check if numOfPages if valid on ReadData side
            EGVRecord[] recentRecords = readData.getRecentEGVsPages(numOfPages);
            MeterRecord[] meterRecords = readData.getRecentMeterRecords();
            // TODO: need to check if numOfPages if valid on ReadData side
            SensorRecord[] sensorRecords = readData.getRecentSensorRecords(numOfPages);
            GlucoseDataSet[] glucoseDataSets = Utils.mergeGlucoseDataRecords(recentRecords, sensorRecords);
            // FIXME: This is a workaround for the new Dexcom AP which seems to have a new format
            SharedPreferences prefs = PreferenceManager.getDefaultSharedPreferences(mContext);
            CalRecord[] calRecords = new CalRecord[1];
            if (prefs.getBoolean("cloud_cal_data", false)) {
                calRecords = readData.getRecentCalRecords();
            }
            long timeSinceLastRecord = readData.getTimeSinceEGVRecord(recentRecords[recentRecords.length - 1]);
            // TODO: determine if the logic here is correct. I suspect it assumes the last record was less than 5
            // minutes ago. If a reading is skipped and the device is plugged in then nextUploadTime will be
            // set to a negative number. This situation will eventually correct itself.
            long nextUploadTime = (1000 * 60 * 5) - (timeSinceLastRecord * (1000));
            long displayTime = readData.readDisplayTime().getTime();
            // FIXME: Device seems to flake out on battery level reads. Removing for now.
            // int batLevel = readData.readBatteryLevel();
            int batLevel = 100;
            // convert into json for d3 plot
            JSONArray array = new JSONArray();
            for (int i = 0; i < recentRecords.length; i++) array.put(recentRecords[i].toJSON());
            EGVRecord recentEGV = recentRecords[recentRecords.length - 1];
            // broadcastSGVToUI(recentEGV, uploadStatus, nextUploadTime + TIME_SYNC_OFFSET,
            // displayTime, array ,batLevel);
            broadcastSent = true;
        } catch (ArrayIndexOutOfBoundsException e) {
            Log.wtf("Unable to read from the dexcom, maybe it will work next time", e);
        } catch (NegativeArraySizeException e) {
            Log.wtf("Negative array exception from receiver", e);
        } catch (IndexOutOfBoundsException e) {
            Log.wtf("IndexOutOfBounds exception from receiver", e);
        } catch (CRCFailRuntimeException e) {
            // FIXME: may consider localizing this catch at a lower level (like ReadData) so that
            // if the CRC check fails on one type of record we can capture the values if it
            // doesn't fail on other types of records. This means we'd need to broadcast back
            // partial results to the UI. Adding it to a lower level could make the ReadData class
            // more difficult to maintain - needs discussion.
            Log.wtf("CRC failed", e);
        } catch (Exception e) {
            Log.wtf("Unhandled exception caught", e);
        } finally {
            // Close serial
            try {
                mSerialDevice.getPorts().get(0).close();
            } catch (IOException e) {
                Log.e(TAG, "Unable to close", e);
            }
        }
    }
// if (!broadcastSent) broadcastSGVToUI();
}

Example 4 with MeterRecord

use of com.eveningoutpost.dexdrip.ImportedLibraries.dexcom.records.MeterRecord in project xDrip by NightscoutFoundation.

the class SyncingService method sync.

private void sync(int numOfPages) {
    boolean broadcastSent;
    if (acquireSerialDevice()) {
        try {
            ReadData readData = new ReadData(mSerialDevice);
            // TODO: need to check if numOfPages if valid on ReadData side
            EGVRecord[] recentRecords = readData.getRecentEGVsPages(numOfPages);
            MeterRecord[] meterRecords = readData.getRecentMeterRecords();
            // TODO: need to check if numOfPages if valid on ReadData side
            SensorRecord[] sensorRecords = readData.getRecentSensorRecords(numOfPages);
            GlucoseDataSet[] glucoseDataSets = Utils.mergeGlucoseDataRecords(recentRecords, sensorRecords);
            // FIXME: This is a workaround for the new Dexcom AP which seems to have a new format
            SharedPreferences prefs = PreferenceManager.getDefaultSharedPreferences(mContext);
            CalRecord[] calRecords = new CalRecord[1];
            if (prefs.getBoolean("cloud_cal_data", false)) {
                calRecords = readData.getRecentCalRecords();
            }
            long timeSinceLastRecord = readData.getTimeSinceEGVRecord(recentRecords[recentRecords.length - 1]);
            // TODO: determine if the logic here is correct. I suspect it assumes the last record was less than 5
            // minutes ago. If a reading is skipped and the device is plugged in then nextUploadTime will be
            // set to a negative number. This situation will eventually correct itself.
            long nextUploadTime = (1000 * 60 * 5) - (timeSinceLastRecord * (1000));
            long displayTime = readData.readDisplayTime().getTime();
            // FIXME: Device seems to flake out on battery level reads. Removing for now.
            // int batLevel = readData.readBatteryLevel();
            int batLevel = 100;
            // convert into json for d3 plot
            JSONArray array = new JSONArray();
            for (int i = 0; i < recentRecords.length; i++) array.put(recentRecords[i].toJSON());
            EGVRecord recentEGV = recentRecords[recentRecords.length - 1];
            // broadcastSGVToUI(recentEGV, uploadStatus, nextUploadTime + TIME_SYNC_OFFSET,
            // displayTime, array ,batLevel);
            broadcastSent = true;
        } catch (ArrayIndexOutOfBoundsException e) {
            Log.wtf("Unable to read from the dexcom, maybe it will work next time", e);
        } catch (NegativeArraySizeException e) {
            Log.wtf("Negative array exception from receiver", e);
        } catch (IndexOutOfBoundsException e) {
            Log.wtf("IndexOutOfBounds exception from receiver", e);
        } catch (CRCFailRuntimeException e) {
            // FIXME: may consider localizing this catch at a lower level (like ReadData) so that
            // if the CRC check fails on one type of record we can capture the values if it
            // doesn't fail on other types of records. This means we'd need to broadcast back
            // partial results to the UI. Adding it to a lower level could make the ReadData class
            // more difficult to maintain - needs discussion.
            Log.wtf("CRC failed", e);
        } catch (Exception e) {
            Log.wtf("Unhandled exception caught", e);
        } finally {
            // Close serial
            try {
                mSerialDevice.getPorts().get(0).close();
            } catch (IOException e) {
                Log.e(TAG, "Unable to close", e);
            }
        }
    }
// if (!broadcastSent) broadcastSGVToUI();
}

Example 5 with MeterRecord

use of com.eveningoutpost.dexdrip.ImportedLibraries.dexcom.records.MeterRecord in project xDrip-plus by jamorham.

the class ReadDataShare method ParsePage.

private <T> T ParsePage(byte[] data, int recordType, Action1<T> parsedPageReceiver) {
    int HEADER_LEN = 28;
    PageHeader pageHeader = new PageHeader(data);
    int NUM_REC_OFFSET = 4;
    int numRec = data[NUM_REC_OFFSET];
    int rec_len;
    switch(Constants.RECORD_TYPES.values()[recordType]) {
        case MANUFACTURING_DATA:
            GenericXMLRecord xmlRecord = new GenericXMLRecord(Arrays.copyOfRange(data, HEADER_LEN, data.length - 1));
            if (parsedPageReceiver != null) {
                Observable.just((T) xmlRecord).subscribe(parsedPageReceiver);
            } else {
                return (T) xmlRecord;
            }
            break;
        case SENSOR_DATA:
            rec_len = 20;
            SensorRecord[] sensorRecords = new SensorRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                sensorRecords[i] = new SensorRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            if (parsedPageReceiver != null) {
                Observable.just((T) sensorRecords).subscribe(parsedPageReceiver);
            } else {
                return (T) sensorRecords;
            }
            break;
        case EGV_DATA:
            rec_len = 13;
            EGVRecord[] egvRecords = new EGVRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                egvRecords[i] = new EGVRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            if (parsedPageReceiver != null) {
                Observable.just((T) egvRecords).subscribe(parsedPageReceiver);
            } else {
                return (T) egvRecords;
            }
            break;
        case METER_DATA:
            rec_len = 16;
            MeterRecord[] meterRecords = new MeterRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                meterRecords[i] = new MeterRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            if (parsedPageReceiver != null) {
                Observable.just((T) meterRecords).subscribe(parsedPageReceiver);
            } else {
                return (T) meterRecords;
            }
            break;
        case CAL_SET:
            rec_len = 249;
            if (pageHeader.getRevision() <= 2) {
                rec_len = 148;
            }
            CalRecord[] calRecords = new CalRecord[numRec];
            for (int i = 0; i < numRec; i++) {
                int startIdx = HEADER_LEN + rec_len * i;
                calRecords[i] = new CalRecord(Arrays.copyOfRange(data, startIdx, startIdx + rec_len - 1));
            }
            if (parsedPageReceiver != null) {
                Observable.just((T) calRecords).subscribe(parsedPageReceiver);
            } else {
                return (T) calRecords;
            }
            break;
        default:
            break;
    }
    Observable.just((T) null).subscribe(parsedPageReceiver);
    return (T) null;
}