Examples with Liquibase liquibase.Liquibase used on opensource projects

Example 26 with Liquibase

use of liquibase.Liquibase in project stdlib by petergeneric.

the class LiquibaseCore method executeAction.

/**
 * Executes the Liquibase update.
 */
private static void executeAction(InitialContext jndi, GuiceApplicationValueContainer config, Map<String, String> parameters, LiquibaseAction action) throws NamingException, SQLException, LiquibaseException, IOException, ParserConfigurationException {
    // N.B. liquibase may create a databasechangeloglock / databasechangelog table if one does not already exist
    if (action.isWriteAction() && StringUtils.equalsIgnoreCase("true", config.getValue(HIBERNATE_IS_READONLY))) {
        log.info("Changing liquibase action from " + action + " to ASSERT_UPDATED because hibernate is set to read only mode");
        action = LiquibaseAction.ASSERT_UPDATED;
    }
    // Fail if hbm2ddl is enabled (Hibernate should not be involved in schema management)
    if (StringUtils.isNotEmpty(config.getValue(HIBERNATE_SCHEMA_MANAGEMENT)) && action != LiquibaseAction.GENERATE_CHANGELOG) {
        throw new RuntimeException("Liquibase is enabled but so is " + HIBERNATE_SCHEMA_MANAGEMENT + ". Only one of these schema management methods may be used at a time.");
    }
    final String dataSourceName = config.getDataSource();
    final String changeLogFile = config.getValue(GuiceProperties.LIQUIBASE_CHANGELOG);
    final String contexts = config.getValue(GuiceProperties.LIQUIBASE_CONTEXTS);
    final String labels = config.getValue(GuiceProperties.LIQUIBASE_LABELS);
    final String defaultSchema = config.getDefaultSchema();
    final String jdbcUrl = config.getValue(AvailableSettings.URL);
    final String jdbcUsername = config.getValue(AvailableSettings.USER);
    final String jdbcPassword = config.getValue(AvailableSettings.PASS);
    if (StringUtils.isEmpty(dataSourceName) && StringUtils.isEmpty(jdbcUrl))
        throw new RuntimeException("Cannot run Liquibase: no JNDI datasource or JDBC URL set");
    else if (changeLogFile == null)
        throw new RuntimeException("Cannot run Liquibase: " + GuiceProperties.LIQUIBASE_CHANGELOG + " is not set");
    int storedTransactionIsolation = Integer.MIN_VALUE;
    Connection connection = null;
    Database database = null;
    try {
        // Set up the resource accessor
        final ResourceAccessor resourceAccessor;
        {
            final CompositeResourceAccessor composite;
            {
                ClassLoader contextClassLoader = Thread.currentThread().getContextClassLoader();
                ResourceAccessor threadClFO = new ClassLoaderResourceAccessor(contextClassLoader);
                ResourceAccessor clFO = new ClassLoaderResourceAccessor();
                ResourceAccessor fsFO = new FileSystemResourceAccessor();
                composite = new CompositeResourceAccessor(clFO, fsFO, threadClFO);
            }
            // If loading a resource with an absolute path fails, re-try it as a path relative to /
            // This is for unit tests where /liquibase/changelog.xml needs to be accessed as liquibase/changelog.xml
            final ResourceAccessor fallback = new RetryAbsoluteAsRelativeResourceAccessor(composite);
            // Wrap the resource accessor in a filter that interprets ./ as the changeLogFile folder
            resourceAccessor = new RelativePathFilteringResourceAccessor(fallback, changeLogFile);
        }
        // Set up the database
        {
            if (StringUtils.isNotEmpty(dataSourceName)) {
                if (log.isDebugEnabled())
                    log.debug("Look up datasource for liquibase: " + dataSourceName);
                final DataSource dataSource = (DataSource) jndi.lookup(dataSourceName);
                connection = dataSource.getConnection();
            } else {
                if (log.isDebugEnabled())
                    log.debug("Create JDBC Connection directly: " + jdbcUrl);
                // N.B. do we need to call Class.forName on the JDBC Driver URL?
                // JDBC drivers should expose themselves using the service provider interface nowadays so this shouldn't be necessary
                connection = DriverManager.getConnection(jdbcUrl, jdbcUsername, jdbcPassword);
            }
            // Allow changing the transaction isolation away from the default for liquibase
            // This is a hack inserted for SQL Server where the SNAPSHOT isolation is being used
            // because in this mode it refuses to execute certain DDL statements because of metadata not being versioned
            {
                storedTransactionIsolation = connection.getTransactionIsolation();
                // In this case we change to READ UNCOMMITTED for the duration of the liquibase run
                if (storedTransactionIsolation == 4096) {
                    connection.setTransactionIsolation(Connection.TRANSACTION_READ_COMMITTED);
                }
            }
            database = DatabaseFactory.getInstance().findCorrectDatabaseImplementation(new JdbcConnection(connection));
            database.setDefaultSchemaName(defaultSchema);
        }
        Liquibase liquibase = new Liquibase(changeLogFile, resourceAccessor, database);
        for (Map.Entry<String, String> param : parameters.entrySet()) {
            liquibase.setChangeLogParameter(param.getKey(), param.getValue());
        }
        if (log.isDebugEnabled())
            log.debug("Execute liquibase action: " + action);
        switch(action) {
            case ASSERT_UPDATED:
                // Figure out which changesets need to be run
                List<ChangeSet> unrun = liquibase.listUnrunChangeSets(new Contexts(contexts), new LabelExpression(labels));
                if (log.isDebugEnabled())
                    log.debug("Pending changesets: " + unrun);
                // If any need to be run, fail
                if (unrun.size() > 0)
                    throw new LiquibaseChangesetsPending(unrun);
                else
                    return;
            case UPDATE:
                // Perform a schema update
                liquibase.update(new Contexts(contexts), new LabelExpression(labels));
                return;
            case MARK_UPDATED:
                // Mark all pending changesets as run
                liquibase.changeLogSync(new Contexts(contexts), new LabelExpression(labels));
                return;
            case GENERATE_CHANGELOG:
                CatalogAndSchema catalogueAndSchema = CatalogAndSchema.DEFAULT;
                DiffToChangeLog writer = new DiffToChangeLog(new DiffOutputControl(false, false, false, new CompareControl.SchemaComparison[0]));
                ByteArrayOutputStream bos = new ByteArrayOutputStream();
                PrintStream pw = new PrintStream(bos);
                liquibase.generateChangeLog(catalogueAndSchema, writer, pw);
                System.out.println("********** GENERATED CHANGELOG START **********");
                System.out.println(new String(bos.toByteArray()));
                System.out.println("********** GENERATED CHANGELOG END **********");
                break;
            default:
                throw new RuntimeException("Unknown liquibase action: " + action);
        }
    } finally {
        // N.B. we don't return to isolations < 0 (isolation at db defaults)
        if (connection != null && connection.getTransactionIsolation() != storedTransactionIsolation && storedTransactionIsolation >= 0) {
            connection.setTransactionIsolation(storedTransactionIsolation);
        }
        if (database != null)
            database.close();
        else if (connection != null)
            connection.close();
    }
}

Example 27 with Liquibase

use of liquibase.Liquibase in project api-core by ca-cwds.

the class BasePersistenceTest method runLiquibaseScript.

private void runLiquibaseScript(String script) throws LiquibaseException {
    try {
        Liquibase liquibase = new Liquibase(script, new ClassLoaderResourceAccessor(), getDatabase());
        liquibase.update((String) null);
    } catch (Exception e) {
        throw new LiquibaseException(e);
    }
}

Example 28 with Liquibase

use of liquibase.Liquibase in project dropwizard by dropwizard.

the class DbGenerateDocsCommandTest method testRun.

@Test
void testRun() throws Exception {
    Liquibase liquibase = Mockito.mock(Liquibase.class);
    generateDocsCommand.run(new Namespace(Collections.singletonMap("output", Collections.singletonList("/tmp/docs"))), liquibase);
    Mockito.verify(liquibase).generateDocumentation("/tmp/docs");
}

Example 29 with Liquibase

use of liquibase.Liquibase in project dropwizard by dropwizard.

the class DbClearChecksumsCommandTest method testRun.

@Test
void testRun() throws Exception {
    final Liquibase liquibase = Mockito.mock(Liquibase.class);
    clearChecksums.run(new Namespace(Collections.emptyMap()), liquibase);
    Mockito.verify(liquibase).clearCheckSums();
}

Example 30 with Liquibase

use of liquibase.Liquibase in project dropwizard by dropwizard.

the class DbLocksCommandTest method testListLocks.

@Test
void testListLocks() throws Exception {
    final PrintStream printStream = new PrintStream(new ByteArrayOutputStream());
    locksCommand.setPrintStream(printStream);
    // We can't create locks in the database, so use mocks
    final Liquibase liquibase = Mockito.mock(Liquibase.class);
    locksCommand.run(new Namespace(Maps.of("list", true, "release", false)), liquibase);
    Mockito.verify(liquibase).reportLocks(printStream);
}