Examples with InstructionFinder org.apache.bcel.util.InstructionFinder used on opensource projects

Example 6 with InstructionFinder

use of org.apache.bcel.util.InstructionFinder in project jop by jop-devel.

the class ReplaceNativeAndCPIdx method replace.

private Method replace(Method method) {
    MethodGen mg = new MethodGen(method, clazz.getClassName(), cpoolgen);
    InstructionList il = mg.getInstructionList();
    InstructionFinder f = new InstructionFinder(il);
    String methodId = method.getName() + method.getSignature();
    OldMethodInfo mi = getCli().getMethodInfo(methodId);
    // find invokes first and replace call to Native by
    // JOP native instructions.
    String invokeStr = "InvokeInstruction";
    for (Iterator i = f.search(invokeStr); i.hasNext(); ) {
        InstructionHandle[] match = (InstructionHandle[]) i.next();
        InstructionHandle first = match[0];
        InvokeInstruction ii = (InvokeInstruction) first.getInstruction();
        if (ii.getClassName(cpoolgen).equals(JOPizer.nativeClass)) {
            short opid = (short) JopInstr.getNative(ii.getMethodName(cpoolgen));
            if (opid == -1) {
                System.err.println(method.getName() + ": cannot locate " + ii.getMethodName(cpoolgen) + ". Replacing with NOP.");
                first.setInstruction(new NOP());
            } else {
                first.setInstruction(new NativeInstruction(opid, (short) 1));
                ((JOPizer) ai).outTxt.println("\t" + first.getPosition());
                // then we remove pc+2 and pc+1 from the MGCI info
                if (JOPizer.dumpMgci) {
                    il.setPositions();
                    int pc = first.getPosition();
                    // important: take the high one first
                    GCRTMethodInfo.removePC(pc + 2, mi);
                    GCRTMethodInfo.removePC(pc + 1, mi);
                }
            }
        }
        if (ii instanceof INVOKESPECIAL) {
            // not an initializer
            if (!ii.getMethodName(cpoolgen).equals("<init>")) {
                // check if this is a super invoke
                // TODO this is just a hack, use InvokeSite.isInvokeSuper() when this is ported to the new framework!
                boolean isSuper = false;
                String declaredType = ii.getClassName(cpoolgen);
                JopClassInfo cls = getCli();
                OldClassInfo superClass = cls.superClass;
                while (superClass != null) {
                    if (superClass.clazz.getClassName().equals(declaredType)) {
                        isSuper = true;
                        break;
                    }
                    if ("java.lang.Object".equals(superClass.clazz.getClassName())) {
                        break;
                    }
                    superClass = superClass.superClass;
                }
                if (isSuper) {
                    Integer idx = ii.getIndex();
                    int new_index = getCli().cpoolUsed.indexOf(idx) + 1;
                    first.setInstruction(new JOPSYS_INVOKESUPER((short) new_index));
                // System.err.println("invokesuper "+ii.getClassName(cpoolgen)+"."+ii.getMethodName(cpoolgen));
                }
            }
        }
    }
    if (JOPizer.CACHE_INVAL) {
        f = new InstructionFinder(il);
        // find volatile reads and insert cache invalidation bytecode
        String fieldInstr = "GETFIELD|GETSTATIC|PUTFIELD|PUTSTATIC";
        for (Iterator i = f.search(fieldInstr); i.hasNext(); ) {
            InstructionHandle[] match = (InstructionHandle[]) i.next();
            InstructionHandle ih = match[0];
            FieldInstruction fi = (FieldInstruction) ih.getInstruction();
            JavaClass jc = JOPizer.jz.cliMap.get(fi.getClassName(cpoolgen)).clazz;
            Field field = null;
            while (field == null) {
                Field[] fields = jc.getFields();
                for (int k = 0; k < fields.length; k++) {
                    if (fields[k].getName().equals(fi.getFieldName(cpoolgen))) {
                        field = fields[k];
                        break;
                    }
                }
                if (field == null) {
                    try {
                        jc = jc.getSuperClass();
                    } catch (ClassNotFoundException e) {
                        e.printStackTrace();
                        throw new Error();
                    }
                }
            }
            if (field.isVolatile()) {
                if (field.getType().getSize() < 2) {
                    if (fi instanceof GETFIELD || fi instanceof GETSTATIC) {
                        ih.setInstruction(new InvalidateInstruction());
                        ih = il.append(ih, fi);
                    }
                } else {
                    // this only works because we do not throw a
                    // NullPointerException for monitorenter/-exit!
                    ih.setInstruction(new ACONST_NULL());
                    ih = il.append(ih, new MONITORENTER());
                    ih = il.append(ih, fi);
                    ih = il.append(ih, new ACONST_NULL());
                    ih = il.append(ih, new MONITOREXIT());
                }
            }
        }
    }
    f = new InstructionFinder(il);
    // find instructions that access the constant pool
    // and replace the index by the new value from ClassInfo
    String cpInstr = "CPInstruction";
    for (Iterator it = f.search(cpInstr); it.hasNext(); ) {
        InstructionHandle[] match = (InstructionHandle[]) it.next();
        InstructionHandle ih = match[0];
        CPInstruction cpii = (CPInstruction) ih.getInstruction();
        int index = cpii.getIndex();
        // we have to grab the information before we change
        // the CP index.
        FieldInstruction fi = null;
        Type ft = null;
        if (cpii instanceof FieldInstruction) {
            fi = (FieldInstruction) ih.getInstruction();
            ft = fi.getFieldType(cpoolgen);
        }
        Integer idx = new Integer(index);
        // pos is the new position in the reduced constant pool
        // idx is the position in the 'original' unresolved cpool
        int pos = getCli().cpoolUsed.indexOf(idx);
        int new_index = pos + 1;
        // and putfield and by address for getstatic and putstatic
        if (cpii instanceof GETFIELD || cpii instanceof PUTFIELD || cpii instanceof GETSTATIC || cpii instanceof PUTSTATIC) {
            // we use the offset instead of the CP index
            new_index = getFieldOffset(cp, index);
        } else {
            if (pos == -1) {
                System.out.println("Error: constant " + index + " " + cpoolgen.getConstant(index) + " not found");
                System.out.println("new cpool: " + getCli().cpoolUsed);
                System.out.println("original cpool: " + cpoolgen);
                System.exit(-1);
            }
        }
        // set new index, position starts at
        // 1 as cp points to the length of the pool
        cpii.setIndex(new_index);
        if (cpii instanceof FieldInstruction) {
            boolean isRef = ft instanceof ReferenceType;
            boolean isLong = ft == BasicType.LONG || ft == BasicType.DOUBLE;
            if (fi instanceof GETSTATIC) {
                if (isRef) {
                    ih.setInstruction(new GETSTATIC_REF((short) new_index));
                } else if (isLong) {
                    ih.setInstruction(new GETSTATIC_LONG((short) new_index));
                }
            } else if (fi instanceof PUTSTATIC) {
                if (isRef) {
                    if (!com.jopdesign.build.JOPizer.USE_RTTM) {
                        ih.setInstruction(new PUTSTATIC_REF((short) new_index));
                    }
                } else if (isLong) {
                    ih.setInstruction(new PUTSTATIC_LONG((short) new_index));
                }
            } else if (fi instanceof GETFIELD) {
                if (isRef) {
                    ih.setInstruction(new GETFIELD_REF((short) new_index));
                } else if (isLong) {
                    ih.setInstruction(new GETFIELD_LONG((short) new_index));
                }
            } else if (fi instanceof PUTFIELD) {
                if (isRef) {
                    if (!com.jopdesign.build.JOPizer.USE_RTTM) {
                        ih.setInstruction(new PUTFIELD_REF((short) new_index));
                    }
                } else if (isLong) {
                    ih.setInstruction(new PUTFIELD_LONG((short) new_index));
                }
            }
        }
    }
    Method m = mg.getMethod();
    il.dispose();
    return m;
}

Example 7 with InstructionFinder

use of org.apache.bcel.util.InstructionFinder in project jop by jop-devel.

the class ReplaceIinc method replace.

private void replace(MethodInfo method) {
    MethodCode mc = method.getCode();
    InstructionList il = mc.getInstructionList();
    InstructionFinder f = new InstructionFinder(il);
    for (Iterator i = f.search("IINC"); i.hasNext(); ) {
        InstructionHandle[] match = (InstructionHandle[]) i.next();
        InstructionHandle ih = match[0];
        IINC ii = (IINC) ih.getInstruction();
        int idx = ii.getIndex();
        int inc = ii.getIncrement();
        //  	    IINC rep = new IINC(idx, inc);
        ih.setInstruction(new ILOAD(idx));
        if (inc >= -1 && inc <= 5) {
            ih = il.append(ih, new ICONST(inc));
        } else if (inc >= -128 && inc < 127) {
            ih = il.append(ih, new BIPUSH((byte) inc));
        } else if (inc >= -32768 && inc < 32767) {
            ih = il.append(ih, new SIPUSH((short) inc));
        } else {
            System.out.println("IINC constant too big");
            System.exit(-1);
        }
        ih = il.append(ih, new IADD());
        ih = il.append(ih, new ISTORE(idx));
    }
    method.compile();
}

Example 8 with InstructionFinder

use of org.apache.bcel.util.InstructionFinder in project jop by jop-devel.

the class PeepholeOptimizer method optimizeBoolExpressions.

/**
     * Optimize some boolean expressions.
     * <p>
     * This code is taken directly from the BCEL manual, chapter 3.3.8.
     * </p>
     *
     * @param il the instruction list to optimize.
     */
private void optimizeBoolExpressions(InstructionList il) {
    InstructionFinder f = new InstructionFinder(il);
    String pat = "IfInstruction ICONST_0 GOTO ICONST_1 NOP(IFEQ|IFNE)";
    CodeConstraint constraint = new CodeConstraint() {

        @Override
        public boolean checkCode(InstructionHandle[] match) {
            IfInstruction if1 = (IfInstruction) match[0].getInstruction();
            GOTO g = (GOTO) match[2].getInstruction();
            return (if1.getTarget() == match[3]) && (g.getTarget() == match[4]);
        }
    };
    for (Iterator e = f.search(pat, constraint); e.hasNext(); ) {
        InstructionHandle[] match = (InstructionHandle[]) e.next();
        IfInstruction if1 = (IfInstruction) match[0].getInstruction();
        IfInstruction if2 = (IfInstruction) match[5].getInstruction();
        // Update target
        if1.setTarget(if2.getTarget());
        try {
            il.delete(match[1], match[5]);
        } catch (TargetLostException ex) {
            for (InstructionHandle target : ex.getTargets()) {
                for (InstructionTargeter t : target.getTargeters()) {
                    t.updateTarget(target, match[0]);
                }
            }
        }
        matchBoolExpressions++;
    }
}