Examples with CommandStackListener org.eclipse.emf.common.command.CommandStackListener used on opensource projects

Example 1 with CommandStackListener

use of org.eclipse.emf.common.command.CommandStackListener in project iobserve-analysis by research-iobserve.

the class cloudprofileEditor method initializeEditingDomain.

/**
 * This sets up the editing domain for the model editor.
 * <!-- begin-user-doc -->
 * <!-- end-user-doc -->
 * @generated
 */
protected void initializeEditingDomain() {
    // Create an adapter factory that yields item providers.
    // 
    adapterFactory = new ComposedAdapterFactory(ComposedAdapterFactory.Descriptor.Registry.INSTANCE);
    adapterFactory.addAdapterFactory(new ResourceItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new cloudprofileItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ReflectiveItemProviderAdapterFactory());
    // Create the command stack that will notify this editor as commands are executed.
    // 
    BasicCommandStack commandStack = new BasicCommandStack();
    // Add a listener to set the most recent command's affected objects to be the selection of the viewer with focus.
    // 
    commandStack.addCommandStackListener(new CommandStackListener() {

        public void commandStackChanged(final EventObject event) {
            getContainer().getDisplay().asyncExec(new Runnable() {

                public void run() {
                    firePropertyChange(IEditorPart.PROP_DIRTY);
                    // Try to select the affected objects.
                    // 
                    Command mostRecentCommand = ((CommandStack) event.getSource()).getMostRecentCommand();
                    if (mostRecentCommand != null) {
                        setSelectionToViewer(mostRecentCommand.getAffectedObjects());
                    }
                    for (Iterator<PropertySheetPage> i = propertySheetPages.iterator(); i.hasNext(); ) {
                        PropertySheetPage propertySheetPage = i.next();
                        if (propertySheetPage.getControl().isDisposed()) {
                            i.remove();
                        } else {
                            propertySheetPage.refresh();
                        }
                    }
                }
            });
        }
    });
    // Create the editing domain with a special command stack.
    // 
    editingDomain = new AdapterFactoryEditingDomain(adapterFactory, commandStack, new HashMap<Resource, Boolean>());
}

Example 2 with CommandStackListener

use of org.eclipse.emf.common.command.CommandStackListener in project iobserve-analysis by research-iobserve.

the class systemadaptationEditor method initializeEditingDomain.

/**
 * This sets up the editing domain for the model editor.
 * <!-- begin-user-doc -->
 * <!-- end-user-doc -->
 * @generated
 */
protected void initializeEditingDomain() {
    // Create an adapter factory that yields item providers.
    // 
    adapterFactory = new ComposedAdapterFactory(ComposedAdapterFactory.Descriptor.Registry.INSTANCE);
    adapterFactory.addAdapterFactory(new ResourceItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new systemadaptationItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new IdentifierItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new PcmItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new CoreItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new EntityItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new CompositionItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new UsagemodelItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new RepositoryItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ResourcetypeItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ProtocolItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ParameterItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ReliabilityItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new SeffItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new SeffPerformanceItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new SeffReliabilityItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new QosannotationsItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new QosPerformanceItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new QosReliabilityItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new SystemItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ResourceenvironmentItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new AllocationItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new SubsystemItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ProbfunctionItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new StoexItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new UnitsItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ReflectiveItemProviderAdapterFactory());
    // Create the command stack that will notify this editor as commands are executed.
    // 
    BasicCommandStack commandStack = new BasicCommandStack();
    // Add a listener to set the most recent command's affected objects to be the selection of the viewer with focus.
    // 
    commandStack.addCommandStackListener(new CommandStackListener() {

        public void commandStackChanged(final EventObject event) {
            getContainer().getDisplay().asyncExec(new Runnable() {

                public void run() {
                    firePropertyChange(IEditorPart.PROP_DIRTY);
                    // Try to select the affected objects.
                    // 
                    Command mostRecentCommand = ((CommandStack) event.getSource()).getMostRecentCommand();
                    if (mostRecentCommand != null) {
                        setSelectionToViewer(mostRecentCommand.getAffectedObjects());
                    }
                    for (Iterator<PropertySheetPage> i = propertySheetPages.iterator(); i.hasNext(); ) {
                        PropertySheetPage propertySheetPage = i.next();
                        if (propertySheetPage.getControl().isDisposed()) {
                            i.remove();
                        } else {
                            propertySheetPage.refresh();
                        }
                    }
                }
            });
        }
    });
    // Create the editing domain with a special command stack.
    // 
    editingDomain = new AdapterFactoryEditingDomain(adapterFactory, commandStack, new HashMap<Resource, Boolean>());
}

Example 3 with CommandStackListener

use of org.eclipse.emf.common.command.CommandStackListener in project InformationSystem by ObeoNetwork.

the class EcorebindingEditor method initializeEditingDomain.

/**
 * This sets up the editing domain for the model editor.
 * <!-- begin-user-doc -->
 * <!-- end-user-doc -->
 * @generated
 */
protected void initializeEditingDomain() {
    // Create an adapter factory that yields item providers.
    // 
    adapterFactory = new ComposedAdapterFactory(ComposedAdapterFactory.Descriptor.Registry.INSTANCE);
    adapterFactory.addAdapterFactory(new ResourceItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new EcorebindingItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new EcoreItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new EnvironmentItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new TechnicalIDItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ReflectiveItemProviderAdapterFactory());
    // Create the command stack that will notify this editor as commands are executed.
    // 
    BasicCommandStack commandStack = new BasicCommandStack();
    // Add a listener to set the most recent command's affected objects to be the selection of the viewer with focus.
    // 
    commandStack.addCommandStackListener(new CommandStackListener() {

        public void commandStackChanged(final EventObject event) {
            getContainer().getDisplay().asyncExec(new Runnable() {

                public void run() {
                    firePropertyChange(IEditorPart.PROP_DIRTY);
                    // Try to select the affected objects.
                    // 
                    Command mostRecentCommand = ((CommandStack) event.getSource()).getMostRecentCommand();
                    if (mostRecentCommand != null) {
                        setSelectionToViewer(mostRecentCommand.getAffectedObjects());
                    }
                    for (Iterator<PropertySheetPage> i = propertySheetPages.iterator(); i.hasNext(); ) {
                        PropertySheetPage propertySheetPage = i.next();
                        if (propertySheetPage.getControl().isDisposed()) {
                            i.remove();
                        } else {
                            propertySheetPage.refresh();
                        }
                    }
                }
            });
        }
    });
    // Create the editing domain with a special command stack.
    // 
    editingDomain = new AdapterFactoryEditingDomain(adapterFactory, commandStack, new HashMap<Resource, Boolean>());
}

Example 4 with CommandStackListener

use of org.eclipse.emf.common.command.CommandStackListener in project InformationSystem by ObeoNetwork.

the class GraalEditor method initializeEditingDomain.

/**
 * This sets up the editing domain for the model editor.
 * <!-- begin-user-doc -->
 * <!-- end-user-doc -->
 * @generated NOT
 */
protected void initializeEditingDomain() {
    // Create an adapter factory that yields item providers.
    // 
    adapterFactory = new ComposedAdapterFactory(ComposedAdapterFactory.Descriptor.Registry.INSTANCE);
    adapterFactory.addAdapterFactory(new ResourceItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new GraalItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new EntityItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ExtensionUtilitiesItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new EnvironmentItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new SoaItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ReflectiveItemProviderAdapterFactory());
    // Create the command stack that will notify this editor as commands are executed.
    // 
    BasicCommandStack commandStack = new BasicCommandStack();
    // Add a listener to set the most recent command's affected objects to be the selection of the viewer with focus.
    // 
    commandStack.addCommandStackListener(new CommandStackListener() {

        public void commandStackChanged(final EventObject event) {
            getContainer().getDisplay().asyncExec(new Runnable() {

                public void run() {
                    firePropertyChange(IEditorPart.PROP_DIRTY);
                    // Try to select the affected objects.
                    // 
                    Command mostRecentCommand = ((CommandStack) event.getSource()).getMostRecentCommand();
                    if (mostRecentCommand != null) {
                        setSelectionToViewer(mostRecentCommand.getAffectedObjects());
                    }
                    if (propertySheetPage != null && !propertySheetPage.getControl().isDisposed() && propertySheetPage.getCurrentTab() != null) {
                        propertySheetPage.refresh();
                    }
                }
            });
        }
    });
    // Create the editing domain with a special command stack.
    // 
    editingDomain = new AdapterFactoryEditingDomain(adapterFactory, commandStack, new HashMap<Resource, Boolean>());
}

Example 5 with CommandStackListener

use of org.eclipse.emf.common.command.CommandStackListener in project InformationSystem by ObeoNetwork.

the class ToolkitsEditor method initializeEditingDomain.

/**
 * This sets up the editing domain for the model editor.
 * <!-- begin-user-doc -->
 * <!-- end-user-doc -->
 * @generated
 */
protected void initializeEditingDomain() {
    // Create an adapter factory that yields item providers.
    // 
    adapterFactory = new ComposedAdapterFactory(ComposedAdapterFactory.Descriptor.Registry.INSTANCE);
    adapterFactory.addAdapterFactory(new ResourceItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new CinematicItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ViewItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new FlowItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ToolkitsItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new EnvironmentItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new TechnicalIDItemProviderAdapterFactory());
    adapterFactory.addAdapterFactory(new ReflectiveItemProviderAdapterFactory());
    // Create the command stack that will notify this editor as commands are executed.
    // 
    BasicCommandStack commandStack = new BasicCommandStack();
    // Add a listener to set the most recent command's affected objects to be the selection of the viewer with focus.
    // 
    commandStack.addCommandStackListener(new CommandStackListener() {

        public void commandStackChanged(final EventObject event) {
            getContainer().getDisplay().asyncExec(new Runnable() {

                public void run() {
                    firePropertyChange(IEditorPart.PROP_DIRTY);
                    // Try to select the affected objects.
                    // 
                    Command mostRecentCommand = ((CommandStack) event.getSource()).getMostRecentCommand();
                    if (mostRecentCommand != null) {
                        setSelectionToViewer(mostRecentCommand.getAffectedObjects());
                    }
                    for (Iterator<PropertySheetPage> i = propertySheetPages.iterator(); i.hasNext(); ) {
                        PropertySheetPage propertySheetPage = i.next();
                        if (propertySheetPage.getControl().isDisposed()) {
                            i.remove();
                        } else {
                            propertySheetPage.refresh();
                        }
                    }
                }
            });
        }
    });
    // Create the editing domain with a special command stack.
    // 
    editingDomain = new AdapterFactoryEditingDomain(adapterFactory, commandStack, new HashMap<Resource, Boolean>());
}