Search in sources :

Example 1 with MultiTurnViewportOffCommandHandler

use of org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOffCommandHandler in project nebula.widgets.nattable by eclipse.

the class _5044_HorizontalSplitViewportGridExample method createExampleControl.

@Override
public Control createExampleControl(Composite parent) {
    // property names of the Person class
    String[] propertyNames = { "firstName", "lastName", "gender", "married", "birthday", "address.street", "address.housenumber", "address.postalCode", "address.city" };
    // mapping from property to label, needed for column header labels
    Map<String, String> propertyToLabelMap = new HashMap<>();
    propertyToLabelMap.put("firstName", "Firstname");
    propertyToLabelMap.put("lastName", "Lastname");
    propertyToLabelMap.put("gender", "Gender");
    propertyToLabelMap.put("married", "Married");
    propertyToLabelMap.put("birthday", "Birthday");
    propertyToLabelMap.put("address.street", "Street");
    propertyToLabelMap.put("address.housenumber", "Housenumber");
    propertyToLabelMap.put("address.postalCode", "Postal Code");
    propertyToLabelMap.put("address.city", "City");
    IColumnPropertyAccessor<PersonWithAddress> columnPropertyAccessor = new ExtendedReflectiveColumnPropertyAccessor<>(propertyNames);
    final BodyLayerStack<PersonWithAddress> bodyLayer = new BodyLayerStack<>(PersonService.getPersonsWithAddress(50), columnPropertyAccessor);
    // build the row header layer
    IDataProvider rowHeaderDataProvider = new DefaultRowHeaderDataProvider(bodyLayer.getBodyDataProvider());
    DataLayer rowHeaderDataLayer = new DefaultRowHeaderDataLayer(rowHeaderDataProvider);
    final ILayer rowHeaderLayer = new RowHeaderLayer(rowHeaderDataLayer, bodyLayer, bodyLayer.getSelectionLayer());
    // build the column header layer
    IDataProvider columnHeaderDataProvider = new DefaultColumnHeaderDataProvider(propertyNames, propertyToLabelMap);
    final DataLayer columnHeaderDataLayer = new DefaultColumnHeaderDataLayer(columnHeaderDataProvider);
    final AbstractLayer columnHeaderLayer = new ColumnHeaderLayer(columnHeaderDataLayer, bodyLayer, bodyLayer.getSelectionLayer());
    // Use this special layer painter that supports rendering of split
    // viewports although the ColumnHeaderLayer is not split. Here is some
    // custom calculation included that might not work correctly in case
    // there are column groups or other spanning involved.
    columnHeaderLayer.setLayerPainter(new CellLayerPainter() {

        @Override
        protected boolean isClipLeft(int position) {
            // check position-1 because of the row header column count
            // as the body is a composite layer, the default transformation
            // for the grid is not working correctly
            int index = LayerUtil.convertColumnPosition(columnHeaderLayer, position - 1, columnHeaderDataLayer);
            return (index > SPLIT_COLUMN_INDEX);
        }

        @Override
        protected void paintCell(ILayerCell cell, GC gc, IConfigRegistry configRegistry) {
            ILayer layer = cell.getLayer();
            int columnPosition = cell.getColumnPosition();
            int rowPosition = cell.getRowPosition();
            ICellPainter cellPainter = layer.getCellPainter(columnPosition, rowPosition, cell, configRegistry);
            Rectangle adjustedCellBounds = layer.getLayerPainter().adjustCellBounds(columnPosition, rowPosition, cell.getBounds());
            if (cellPainter != null) {
                Rectangle originalClipping = gc.getClipping();
                int startX = getStartXOfColumnPosition(columnPosition);
                int startY = getStartYOfRowPosition(rowPosition);
                int endX = getStartXOfColumnPosition(cell.getOriginColumnPosition() + cell.getColumnSpan());
                int endY = getStartYOfRowPosition(cell.getOriginRowPosition() + cell.getRowSpan());
                // correct position of first column in right region
                // find the last visible column in left region
                int viewportBorderX = bodyLayer.getViewportLayerLeft().getClientAreaWidth() + rowHeaderLayer.getWidth();
                if (isClipLeft(columnPosition) && startX < viewportBorderX) {
                    startX = viewportBorderX;
                }
                if (!isClipLeft(columnPosition - 1) && startX > viewportBorderX) {
                    startX = viewportBorderX;
                }
                if (isClipLeft(cell.getOriginColumnPosition() + cell.getColumnSpan()) && endX < viewportBorderX) {
                    endX = viewportBorderX;
                }
                Rectangle cellClipBounds = originalClipping.intersection(new Rectangle(startX, startY, endX - startX, endY - startY));
                gc.setClipping(cellClipBounds.intersection(adjustedCellBounds));
                cellPainter.paintCell(cell, gc, adjustedCellBounds, configRegistry);
                gc.setClipping(originalClipping);
            }
        }
    });
    // build the corner layer
    IDataProvider cornerDataProvider = new DefaultCornerDataProvider(columnHeaderDataProvider, rowHeaderDataProvider);
    DataLayer cornerDataLayer = new DataLayer(cornerDataProvider);
    final ILayer cornerLayer = new CornerLayer(cornerDataLayer, rowHeaderLayer, columnHeaderLayer);
    // build the grid layer
    GridLayer gridLayer = new GridLayer(bodyLayer, columnHeaderLayer, rowHeaderLayer, cornerLayer);
    // in order to make printing and exporting work correctly you need to
    // register the following command handlers
    gridLayer.registerCommandHandler(new MultiTurnViewportOnCommandHandler(bodyLayer.getViewportLayerLeft(), bodyLayer.getViewportLayerRight()));
    gridLayer.registerCommandHandler(new MultiTurnViewportOffCommandHandler(bodyLayer.getViewportLayerLeft(), bodyLayer.getViewportLayerRight()));
    // Wrap NatTable in composite so we can slap on the external horizontal
    // sliders
    Composite composite = new Composite(parent, SWT.NONE);
    GridLayout gridLayout = new GridLayout(1, false);
    gridLayout.marginHeight = 0;
    gridLayout.marginWidth = 0;
    gridLayout.horizontalSpacing = 0;
    gridLayout.verticalSpacing = 0;
    composite.setLayout(gridLayout);
    NatTable natTable = new NatTable(composite, gridLayer, false);
    GridData gridData = new GridData();
    gridData.horizontalAlignment = GridData.FILL;
    gridData.verticalAlignment = GridData.FILL;
    gridData.grabExcessHorizontalSpace = true;
    gridData.grabExcessVerticalSpace = true;
    natTable.setLayoutData(gridData);
    createSplitSliders(composite, rowHeaderLayer, bodyLayer.getViewportLayerLeft(), bodyLayer.getViewportLayerRight());
    // add an IOverlayPainter to ensure the right border of the left
    // viewport always
    // this is necessary because the left border of layer stacks is not
    // rendered by default
    natTable.addOverlayPainter(new IOverlayPainter() {

        @Override
        public void paintOverlay(GC gc, ILayer layer) {
            Color beforeColor = gc.getForeground();
            gc.setForeground(GUIHelper.COLOR_GRAY);
            int viewportBorderX = bodyLayer.getViewportLayerLeft().getWidth() + rowHeaderLayer.getWidth() - 1;
            gc.drawLine(viewportBorderX, 0, viewportBorderX, layer.getHeight() - 1);
            gc.setForeground(beforeColor);
        }
    });
    natTable.addConfiguration(new DefaultNatTableStyleConfiguration());
    natTable.addConfiguration(new HeaderMenuConfiguration(natTable));
    natTable.configure();
    return composite;
}
Also used : AbstractLayer(org.eclipse.nebula.widgets.nattable.layer.AbstractLayer) HashMap(java.util.HashMap) ColumnHeaderLayer(org.eclipse.nebula.widgets.nattable.grid.layer.ColumnHeaderLayer) HeaderMenuConfiguration(org.eclipse.nebula.widgets.nattable.ui.menu.HeaderMenuConfiguration) Rectangle(org.eclipse.swt.graphics.Rectangle) DefaultCornerDataProvider(org.eclipse.nebula.widgets.nattable.grid.data.DefaultCornerDataProvider) IDataProvider(org.eclipse.nebula.widgets.nattable.data.IDataProvider) ICellPainter(org.eclipse.nebula.widgets.nattable.painter.cell.ICellPainter) MultiTurnViewportOffCommandHandler(org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOffCommandHandler) MultiTurnViewportOnCommandHandler(org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOnCommandHandler) DataLayer(org.eclipse.nebula.widgets.nattable.layer.DataLayer) DefaultRowHeaderDataLayer(org.eclipse.nebula.widgets.nattable.grid.layer.DefaultRowHeaderDataLayer) DefaultColumnHeaderDataLayer(org.eclipse.nebula.widgets.nattable.grid.layer.DefaultColumnHeaderDataLayer) GridLayout(org.eclipse.swt.layout.GridLayout) ExtendedReflectiveColumnPropertyAccessor(org.eclipse.nebula.widgets.nattable.data.ExtendedReflectiveColumnPropertyAccessor) DefaultNatTableStyleConfiguration(org.eclipse.nebula.widgets.nattable.config.DefaultNatTableStyleConfiguration) DefaultRowHeaderDataLayer(org.eclipse.nebula.widgets.nattable.grid.layer.DefaultRowHeaderDataLayer) NatTable(org.eclipse.nebula.widgets.nattable.NatTable) PersonWithAddress(org.eclipse.nebula.widgets.nattable.dataset.person.PersonWithAddress) GC(org.eclipse.swt.graphics.GC) Composite(org.eclipse.swt.widgets.Composite) IOverlayPainter(org.eclipse.nebula.widgets.nattable.painter.IOverlayPainter) ILayer(org.eclipse.nebula.widgets.nattable.layer.ILayer) Color(org.eclipse.swt.graphics.Color) DefaultRowHeaderDataProvider(org.eclipse.nebula.widgets.nattable.grid.data.DefaultRowHeaderDataProvider) DefaultColumnHeaderDataLayer(org.eclipse.nebula.widgets.nattable.grid.layer.DefaultColumnHeaderDataLayer) ILayerCell(org.eclipse.nebula.widgets.nattable.layer.cell.ILayerCell) Point(org.eclipse.swt.graphics.Point) RowHeaderLayer(org.eclipse.nebula.widgets.nattable.grid.layer.RowHeaderLayer) CornerLayer(org.eclipse.nebula.widgets.nattable.grid.layer.CornerLayer) CellLayerPainter(org.eclipse.nebula.widgets.nattable.painter.layer.CellLayerPainter) IConfigRegistry(org.eclipse.nebula.widgets.nattable.config.IConfigRegistry) GridData(org.eclipse.swt.layout.GridData) GridLayer(org.eclipse.nebula.widgets.nattable.grid.layer.GridLayer) DefaultColumnHeaderDataProvider(org.eclipse.nebula.widgets.nattable.grid.data.DefaultColumnHeaderDataProvider)

Example 2 with MultiTurnViewportOffCommandHandler

use of org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOffCommandHandler in project nebula.widgets.nattable by eclipse.

the class _5042_HorizontalSplitViewportExample method createExampleControl.

@Override
public Control createExampleControl(Composite parent) {
    // property names of the Person class
    String[] propertyNames = { "firstName", "lastName", "gender", "married", "birthday", "address.street", "address.housenumber", "address.postalCode", "address.city" };
    IColumnPropertyAccessor<PersonWithAddress> columnPropertyAccessor = new ExtendedReflectiveColumnPropertyAccessor<>(propertyNames);
    IDataProvider bodyDataProvider = new ListDataProvider<>(PersonService.getPersonsWithAddress(50), columnPropertyAccessor);
    DataLayer bodyDataLayer = new DataLayer(bodyDataProvider);
    // use a cell layer painter that is configured for left clipping
    // this ensures that the rendering works correctly for split viewports
    bodyDataLayer.setLayerPainter(new GridLineCellLayerPainter(true, false));
    // create a ViewportLayer for the left part of the table and configure
    // it to only contain the first 5 columns
    final ViewportLayer viewportLayerLeft = new ViewportLayer(bodyDataLayer);
    viewportLayerLeft.setMaxColumnPosition(5);
    // create a ViewportLayer for the right part of the table and configure
    // it to only contain the last 4 columns
    ViewportLayer viewportLayerRight = new ViewportLayer(bodyDataLayer);
    viewportLayerRight.setMinColumnPosition(5);
    // create a CompositeLayer that contains both ViewportLayers
    CompositeLayer compositeLayer = new CompositeLayer(2, 1);
    compositeLayer.setChildLayer("REGION_A", viewportLayerLeft, 0, 0);
    compositeLayer.setChildLayer("REGION_B", viewportLayerRight, 1, 0);
    // in order to make printing and exporting work correctly you need to
    // register the following command handlers
    // although in this example printing and exporting is not enabled, we
    // show the registering
    compositeLayer.registerCommandHandler(new MultiTurnViewportOnCommandHandler(viewportLayerLeft, viewportLayerRight));
    compositeLayer.registerCommandHandler(new MultiTurnViewportOffCommandHandler(viewportLayerLeft, viewportLayerRight));
    // set the width of the left viewport to only showing 2 columns at the
    // same time
    int leftWidth = bodyDataLayer.getStartXOfColumnPosition(2);
    // as the CompositeLayer is setting a IClientAreaProvider for the
    // composition we need to set a special ClientAreaAdapter after the
    // creation of the CompositeLayer to support split viewports
    ClientAreaAdapter leftClientAreaAdapter = new ClientAreaAdapter(viewportLayerLeft.getClientAreaProvider());
    leftClientAreaAdapter.setWidth(leftWidth);
    viewportLayerLeft.setClientAreaProvider(leftClientAreaAdapter);
    // Wrap NatTable in composite so we can slap on the external horizontal
    // sliders
    Composite composite = new Composite(parent, SWT.NONE);
    GridLayout gridLayout = new GridLayout(1, false);
    gridLayout.marginHeight = 0;
    gridLayout.marginWidth = 0;
    gridLayout.horizontalSpacing = 0;
    gridLayout.verticalSpacing = 0;
    composite.setLayout(gridLayout);
    NatTable natTable = new NatTable(composite, compositeLayer);
    GridData gridData = new GridData();
    gridData.horizontalAlignment = GridData.FILL;
    gridData.verticalAlignment = GridData.FILL;
    gridData.grabExcessHorizontalSpace = true;
    gridData.grabExcessVerticalSpace = true;
    natTable.setLayoutData(gridData);
    createSplitSliders(composite, viewportLayerLeft, viewportLayerRight);
    // add an IOverlayPainter to ensure the right border of the left
    // viewport always this is necessary because the left border of layer
    // stacks is not rendered by default
    natTable.addOverlayPainter(new IOverlayPainter() {

        @Override
        public void paintOverlay(GC gc, ILayer layer) {
            Color beforeColor = gc.getForeground();
            gc.setForeground(GUIHelper.COLOR_GRAY);
            int viewportBorderX = viewportLayerLeft.getWidth() - 1;
            gc.drawLine(viewportBorderX, 0, viewportBorderX, layer.getHeight() - 1);
            gc.setForeground(beforeColor);
        }
    });
    return composite;
}
Also used : ListDataProvider(org.eclipse.nebula.widgets.nattable.data.ListDataProvider) Composite(org.eclipse.swt.widgets.Composite) IOverlayPainter(org.eclipse.nebula.widgets.nattable.painter.IOverlayPainter) ILayer(org.eclipse.nebula.widgets.nattable.layer.ILayer) Color(org.eclipse.swt.graphics.Color) IDataProvider(org.eclipse.nebula.widgets.nattable.data.IDataProvider) ViewportLayer(org.eclipse.nebula.widgets.nattable.viewport.ViewportLayer) CompositeLayer(org.eclipse.nebula.widgets.nattable.layer.CompositeLayer) Point(org.eclipse.swt.graphics.Point) MultiTurnViewportOffCommandHandler(org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOffCommandHandler) MultiTurnViewportOnCommandHandler(org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOnCommandHandler) ClientAreaAdapter(org.eclipse.nebula.widgets.nattable.util.ClientAreaAdapter) DataLayer(org.eclipse.nebula.widgets.nattable.layer.DataLayer) GridLayout(org.eclipse.swt.layout.GridLayout) ExtendedReflectiveColumnPropertyAccessor(org.eclipse.nebula.widgets.nattable.data.ExtendedReflectiveColumnPropertyAccessor) GridData(org.eclipse.swt.layout.GridData) NatTable(org.eclipse.nebula.widgets.nattable.NatTable) PersonWithAddress(org.eclipse.nebula.widgets.nattable.dataset.person.PersonWithAddress) GridLineCellLayerPainter(org.eclipse.nebula.widgets.nattable.painter.layer.GridLineCellLayerPainter) GC(org.eclipse.swt.graphics.GC)

Example 3 with MultiTurnViewportOffCommandHandler

use of org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOffCommandHandler in project nebula.widgets.nattable by eclipse.

the class _5043_VerticalSplitViewportExample method createExampleControl.

@Override
public Control createExampleControl(Composite parent) {
    // property names of the Person class
    String[] propertyNames = { "firstName", "lastName", "gender", "married", "birthday", "address.street", "address.housenumber", "address.postalCode", "address.city" };
    IColumnPropertyAccessor<PersonWithAddress> columnPropertyAccessor = new ExtendedReflectiveColumnPropertyAccessor<>(propertyNames);
    IDataProvider bodyDataProvider = new ListDataProvider<>(PersonService.getPersonsWithAddress(50), columnPropertyAccessor);
    DataLayer bodyDataLayer = new DataLayer(bodyDataProvider);
    // use a cell layer painter that is configured for left clipping
    // this ensures that the rendering works correctly for split viewports
    bodyDataLayer.setLayerPainter(new GridLineCellLayerPainter(false, true));
    // create a ViewportLayer for the top part of the table and configure it
    // to only contain the first 10 rows
    final ViewportLayer viewportLayerTop = new ViewportLayer(bodyDataLayer);
    viewportLayerTop.setMaxRowPosition(10);
    // create a ViewportLayer for the bottom part of the table and configure
    // it to only contain the last rows
    ViewportLayer viewportLayerBottom = new ViewportLayer(bodyDataLayer);
    viewportLayerBottom.setMinRowPosition(10);
    // create a CompositeLayer that contains both ViewportLayers
    CompositeLayer compositeLayer = new CompositeLayer(1, 2);
    compositeLayer.setChildLayer("REGION_A", viewportLayerTop, 0, 0);
    compositeLayer.setChildLayer("REGION_B", viewportLayerBottom, 0, 1);
    // in order to make printing and exporting work correctly you need to
    // register the following command handlers although in this example
    // printing and exporting is not enabled, we show the registering
    compositeLayer.registerCommandHandler(new MultiTurnViewportOnCommandHandler(viewportLayerTop, viewportLayerBottom));
    compositeLayer.registerCommandHandler(new MultiTurnViewportOffCommandHandler(viewportLayerTop, viewportLayerBottom));
    // set the height of the top viewport to only showing 2 rows at the same
    // time
    int topHeight = bodyDataLayer.getStartYOfRowPosition(2);
    // as the CompositeLayer is setting a IClientAreaProvider for the
    // composition we need to set a special ClientAreaAdapter after the
    // creation of the CompositeLayer to support split viewports
    ClientAreaAdapter topClientAreaAdapter = new ClientAreaAdapter(viewportLayerTop.getClientAreaProvider());
    topClientAreaAdapter.setHeight(topHeight);
    viewportLayerTop.setClientAreaProvider(topClientAreaAdapter);
    // Wrap NatTable in composite so we can slap on the external vertical
    // sliders
    Composite composite = new Composite(parent, SWT.NONE);
    GridLayout gridLayout = new GridLayout(2, false);
    gridLayout.marginHeight = 0;
    gridLayout.marginWidth = 0;
    gridLayout.horizontalSpacing = 0;
    gridLayout.verticalSpacing = 0;
    composite.setLayout(gridLayout);
    NatTable natTable = new NatTable(composite, compositeLayer);
    GridData gridData = new GridData();
    gridData.horizontalAlignment = GridData.FILL;
    gridData.verticalAlignment = GridData.FILL;
    gridData.grabExcessHorizontalSpace = true;
    gridData.grabExcessVerticalSpace = true;
    natTable.setLayoutData(gridData);
    createSplitSliders(composite, viewportLayerTop, viewportLayerBottom);
    // add an IOverlayPainter to ensure the right border of the left
    // viewport always this is necessary because the left border of layer
    // stacks is not rendered by default
    natTable.addOverlayPainter(new IOverlayPainter() {

        @Override
        public void paintOverlay(GC gc, ILayer layer) {
            Color beforeColor = gc.getForeground();
            gc.setForeground(GUIHelper.COLOR_GRAY);
            int viewportBorderY = viewportLayerTop.getHeight() - 1;
            gc.drawLine(0, viewportBorderY, layer.getWidth() - 1, viewportBorderY);
            gc.setForeground(beforeColor);
        }
    });
    return composite;
}
Also used : ListDataProvider(org.eclipse.nebula.widgets.nattable.data.ListDataProvider) Composite(org.eclipse.swt.widgets.Composite) IOverlayPainter(org.eclipse.nebula.widgets.nattable.painter.IOverlayPainter) ILayer(org.eclipse.nebula.widgets.nattable.layer.ILayer) Color(org.eclipse.swt.graphics.Color) IDataProvider(org.eclipse.nebula.widgets.nattable.data.IDataProvider) ViewportLayer(org.eclipse.nebula.widgets.nattable.viewport.ViewportLayer) CompositeLayer(org.eclipse.nebula.widgets.nattable.layer.CompositeLayer) Point(org.eclipse.swt.graphics.Point) MultiTurnViewportOffCommandHandler(org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOffCommandHandler) MultiTurnViewportOnCommandHandler(org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOnCommandHandler) ClientAreaAdapter(org.eclipse.nebula.widgets.nattable.util.ClientAreaAdapter) DataLayer(org.eclipse.nebula.widgets.nattable.layer.DataLayer) GridLayout(org.eclipse.swt.layout.GridLayout) ExtendedReflectiveColumnPropertyAccessor(org.eclipse.nebula.widgets.nattable.data.ExtendedReflectiveColumnPropertyAccessor) GridData(org.eclipse.swt.layout.GridData) NatTable(org.eclipse.nebula.widgets.nattable.NatTable) PersonWithAddress(org.eclipse.nebula.widgets.nattable.dataset.person.PersonWithAddress) GridLineCellLayerPainter(org.eclipse.nebula.widgets.nattable.painter.layer.GridLineCellLayerPainter) GC(org.eclipse.swt.graphics.GC)

Aggregations

NatTable (org.eclipse.nebula.widgets.nattable.NatTable)3 ExtendedReflectiveColumnPropertyAccessor (org.eclipse.nebula.widgets.nattable.data.ExtendedReflectiveColumnPropertyAccessor)3 IDataProvider (org.eclipse.nebula.widgets.nattable.data.IDataProvider)3 PersonWithAddress (org.eclipse.nebula.widgets.nattable.dataset.person.PersonWithAddress)3 DataLayer (org.eclipse.nebula.widgets.nattable.layer.DataLayer)3 ILayer (org.eclipse.nebula.widgets.nattable.layer.ILayer)3 IOverlayPainter (org.eclipse.nebula.widgets.nattable.painter.IOverlayPainter)3 MultiTurnViewportOffCommandHandler (org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOffCommandHandler)3 MultiTurnViewportOnCommandHandler (org.eclipse.nebula.widgets.nattable.print.command.MultiTurnViewportOnCommandHandler)3 Color (org.eclipse.swt.graphics.Color)3 GC (org.eclipse.swt.graphics.GC)3 Point (org.eclipse.swt.graphics.Point)3 GridData (org.eclipse.swt.layout.GridData)3 GridLayout (org.eclipse.swt.layout.GridLayout)3 Composite (org.eclipse.swt.widgets.Composite)3 ListDataProvider (org.eclipse.nebula.widgets.nattable.data.ListDataProvider)2 CompositeLayer (org.eclipse.nebula.widgets.nattable.layer.CompositeLayer)2 GridLineCellLayerPainter (org.eclipse.nebula.widgets.nattable.painter.layer.GridLineCellLayerPainter)2 ClientAreaAdapter (org.eclipse.nebula.widgets.nattable.util.ClientAreaAdapter)2 ViewportLayer (org.eclipse.nebula.widgets.nattable.viewport.ViewportLayer)2