Examples with OSRMonitorEnterNode org.graalvm.compiler.nodes.extended.OSRMonitorEnterNode used on opensource projects

Example 1 with OSRMonitorEnterNode

use of org.graalvm.compiler.nodes.extended.OSRMonitorEnterNode in project graal by oracle.

the class OnStackReplacementPhase method run.

@Override
@SuppressWarnings("try")
protected void run(StructuredGraph graph) {
    DebugContext debug = graph.getDebug();
    if (graph.getEntryBCI() == JVMCICompiler.INVOCATION_ENTRY_BCI) {
        // used.
        assert graph.getNodes(EntryMarkerNode.TYPE).isEmpty();
        return;
    }
    debug.dump(DebugContext.DETAILED_LEVEL, graph, "OnStackReplacement initial at bci %d", graph.getEntryBCI());
    EntryMarkerNode osr;
    int maxIterations = -1;
    int iterations = 0;
    final EntryMarkerNode originalOSRNode = getEntryMarker(graph);
    final LoopBeginNode originalOSRLoop = osrLoop(originalOSRNode);
    final boolean currentOSRWithLocks = osrWithLocks(originalOSRNode);
    if (originalOSRLoop == null) {
        /*
             * OSR with Locks: We do not have an OSR loop for the original OSR bci. Therefore we
             * cannot decide where to deopt and which framestate will be used. In the worst case the
             * framestate of the OSR entry would be used.
             */
        throw new PermanentBailoutException("OSR compilation without OSR entry loop.");
    }
    if (!supportOSRWithLocks(graph.getOptions()) && currentOSRWithLocks) {
        throw new PermanentBailoutException("OSR with locks disabled.");
    }
    do {
        osr = getEntryMarker(graph);
        LoopsData loops = new LoopsData(graph);
        // Find the loop that contains the EntryMarker
        Loop<Block> l = loops.getCFG().getNodeToBlock().get(osr).getLoop();
        if (l == null) {
            break;
        }
        iterations++;
        if (maxIterations == -1) {
            maxIterations = l.getDepth();
        } else if (iterations > maxIterations) {
            throw GraalError.shouldNotReachHere();
        }
        // Peel the outermost loop first
        while (l.getParent() != null) {
            l = l.getParent();
        }
        LoopTransformations.peel(loops.loop(l));
        osr.replaceAtUsages(InputType.Guard, AbstractBeginNode.prevBegin((FixedNode) osr.predecessor()));
        for (Node usage : osr.usages().snapshot()) {
            EntryProxyNode proxy = (EntryProxyNode) usage;
            proxy.replaceAndDelete(proxy.value());
        }
        GraphUtil.removeFixedWithUnusedInputs(osr);
        debug.dump(DebugContext.DETAILED_LEVEL, graph, "OnStackReplacement loop peeling result");
    } while (true);
    StartNode start = graph.start();
    FrameState osrState = osr.stateAfter();
    OSRStartNode osrStart;
    try (DebugCloseable context = osr.withNodeSourcePosition()) {
        osr.setStateAfter(null);
        osrStart = graph.add(new OSRStartNode());
        FixedNode next = osr.next();
        osr.setNext(null);
        osrStart.setNext(next);
        graph.setStart(osrStart);
        osrStart.setStateAfter(osrState);
        debug.dump(DebugContext.DETAILED_LEVEL, graph, "OnStackReplacement after setting OSR start");
        final int localsSize = osrState.localsSize();
        final int locksSize = osrState.locksSize();
        for (int i = 0; i < localsSize + locksSize; i++) {
            ValueNode value = null;
            if (i >= localsSize) {
                value = osrState.lockAt(i - localsSize);
            } else {
                value = osrState.localAt(i);
            }
            if (value instanceof EntryProxyNode) {
                EntryProxyNode proxy = (EntryProxyNode) value;
                /*
                     * We need to drop the stamp since the types we see during OSR may be too
                     * precise (if a branch was not parsed for example). In cases when this is
                     * possible, we insert a guard and narrow the OSRLocal stamp at its usages.
                     */
                Stamp narrowedStamp = proxy.value().stamp(NodeView.DEFAULT);
                Stamp unrestrictedStamp = proxy.stamp(NodeView.DEFAULT).unrestricted();
                ValueNode osrLocal;
                if (i >= localsSize) {
                    osrLocal = graph.addOrUnique(new OSRLockNode(i - localsSize, unrestrictedStamp));
                } else {
                    osrLocal = graph.addOrUnique(new OSRLocalNode(i, unrestrictedStamp));
                }
                // Speculate on the OSRLocal stamps that could be more precise.
                OSRLocalSpeculationReason reason = new OSRLocalSpeculationReason(osrState.bci, narrowedStamp, i);
                if (graph.getSpeculationLog().maySpeculate(reason) && osrLocal instanceof OSRLocalNode && value.getStackKind().equals(JavaKind.Object) && !narrowedStamp.isUnrestricted()) {
                    // Add guard.
                    LogicNode check = graph.addOrUniqueWithInputs(InstanceOfNode.createHelper((ObjectStamp) narrowedStamp, osrLocal, null, null));
                    JavaConstant constant = graph.getSpeculationLog().speculate(reason);
                    FixedGuardNode guard = graph.add(new FixedGuardNode(check, DeoptimizationReason.OptimizedTypeCheckViolated, DeoptimizationAction.InvalidateRecompile, constant, false));
                    graph.addAfterFixed(osrStart, guard);
                    // Replace with a more specific type at usages.
                    // We know that we are at the root,
                    // so we need to replace the proxy in the state.
                    proxy.replaceAtMatchingUsages(osrLocal, n -> n == osrState);
                    osrLocal = graph.addOrUnique(new PiNode(osrLocal, narrowedStamp, guard));
                }
                proxy.replaceAndDelete(osrLocal);
            } else {
                assert value == null || value instanceof OSRLocalNode;
            }
        }
        osr.replaceAtUsages(InputType.Guard, osrStart);
    }
    debug.dump(DebugContext.DETAILED_LEVEL, graph, "OnStackReplacement after replacing entry proxies");
    GraphUtil.killCFG(start);
    debug.dump(DebugContext.DETAILED_LEVEL, graph, "OnStackReplacement result");
    new DeadCodeEliminationPhase(Required).apply(graph);
    if (currentOSRWithLocks) {
        OsrWithLocksCount.increment(debug);
        try (DebugCloseable context = osrStart.withNodeSourcePosition()) {
            for (int i = osrState.monitorIdCount() - 1; i >= 0; --i) {
                MonitorIdNode id = osrState.monitorIdAt(i);
                ValueNode lockedObject = osrState.lockAt(i);
                OSRMonitorEnterNode osrMonitorEnter = graph.add(new OSRMonitorEnterNode(lockedObject, id));
                for (Node usage : id.usages()) {
                    if (usage instanceof AccessMonitorNode) {
                        AccessMonitorNode access = (AccessMonitorNode) usage;
                        access.setObject(lockedObject);
                    }
                }
                FixedNode oldNext = osrStart.next();
                oldNext.replaceAtPredecessor(null);
                osrMonitorEnter.setNext(oldNext);
                osrStart.setNext(osrMonitorEnter);
            }
        }
        debug.dump(DebugContext.DETAILED_LEVEL, graph, "After inserting OSR monitor enters");
        /*
             * Ensure balanced monitorenter - monitorexit
             *
             * Ensure that there is no monitor exit without a monitor enter in the graph. If there
             * is one this can only be done by bytecode as we have the monitor enter before the OSR
             * loop but the exit in a path of the loop that must be under a condition, else it will
             * throw an IllegalStateException anyway in the 2.iteration
             */
        for (MonitorExitNode exit : graph.getNodes(MonitorExitNode.TYPE)) {
            MonitorIdNode id = exit.getMonitorId();
            if (id.usages().filter(MonitorEnterNode.class).count() != 1) {
                throw new PermanentBailoutException("Unbalanced monitor enter-exit in OSR compilation with locks. Object is locked before the loop but released inside the loop.");
            }
        }
    }
    debug.dump(DebugContext.DETAILED_LEVEL, graph, "OnStackReplacement result");
    new DeadCodeEliminationPhase(Required).apply(graph);
    /*
         * There must not be any parameter nodes left after OSR compilation.
         */
    assert graph.getNodes(ParameterNode.TYPE).count() == 0 : "OSR Compilation contains references to parameters.";
}

Example 2 with OSRMonitorEnterNode

use of org.graalvm.compiler.nodes.extended.OSRMonitorEnterNode in project graal by oracle.

the class DefaultHotSpotLoweringProvider method lowerOSRStartNode.

private void lowerOSRStartNode(OSRStartNode osrStart) {
    StructuredGraph graph = osrStart.graph();
    if (graph.getGuardsStage() == StructuredGraph.GuardsStage.FIXED_DEOPTS) {
        StartNode newStart = graph.add(new StartNode());
        ParameterNode buffer = graph.addWithoutUnique(new ParameterNode(0, StampPair.createSingle(StampFactory.forKind(runtime.getTarget().wordJavaKind))));
        ForeignCallNode migrationEnd = graph.add(new ForeignCallNode(foreignCalls, OSR_MIGRATION_END, buffer));
        migrationEnd.setStateAfter(osrStart.stateAfter());
        newStart.setNext(migrationEnd);
        FixedNode next = osrStart.next();
        osrStart.setNext(null);
        migrationEnd.setNext(next);
        graph.setStart(newStart);
        final int wordSize = target.wordSize;
        // @formatter:off
        // taken from c2 locals_addr = osr_buf + (max_locals-1)*wordSize)
        // @formatter:on
        int localsOffset = (graph.method().getMaxLocals() - 1) * wordSize;
        for (OSRLocalNode osrLocal : graph.getNodes(OSRLocalNode.TYPE)) {
            int size = osrLocal.getStackKind().getSlotCount();
            int offset = localsOffset - (osrLocal.index() + size - 1) * wordSize;
            AddressNode address = createOffsetAddress(graph, buffer, offset);
            ReadNode load = graph.add(new ReadNode(address, any(), osrLocal.stamp(NodeView.DEFAULT), BarrierType.NONE));
            osrLocal.replaceAndDelete(load);
            graph.addBeforeFixed(migrationEnd, load);
        }
        // @formatter:off
        // taken from c2 monitors_addr = osr_buf + (max_locals+mcnt*2-1)*wordSize);
        // @formatter:on
        final int lockCount = osrStart.stateAfter().locksSize();
        final int locksOffset = (graph.method().getMaxLocals() + lockCount * 2 - 1) * wordSize;
        // buffer
        for (OSRMonitorEnterNode osrMonitorEnter : graph.getNodes(OSRMonitorEnterNode.TYPE)) {
            MonitorIdNode monitorID = osrMonitorEnter.getMonitorId();
            OSRLockNode lock = (OSRLockNode) osrMonitorEnter.object();
            final int index = lock.index();
            final int offsetDisplacedHeader = locksOffset - ((index * 2) + 1) * wordSize;
            final int offsetLockObject = locksOffset - index * 2 * wordSize;
            // load the displaced mark from the osr buffer
            AddressNode addressDisplacedHeader = createOffsetAddress(graph, buffer, offsetDisplacedHeader);
            ReadNode loadDisplacedHeader = graph.add(new ReadNode(addressDisplacedHeader, any(), lock.stamp(NodeView.DEFAULT), BarrierType.NONE));
            graph.addBeforeFixed(migrationEnd, loadDisplacedHeader);
            // we need to initialize the stack slot for the lock
            BeginLockScopeNode beginLockScope = graph.add(new BeginLockScopeNode(lock.getStackKind(), monitorID.getLockDepth()));
            graph.addBeforeFixed(migrationEnd, beginLockScope);
            // write the displaced mark to the correct stack slot
            AddressNode addressDisplacedMark = createOffsetAddress(graph, beginLockScope, runtime.getVMConfig().basicLockDisplacedHeaderOffset);
            WriteNode writeStackSlot = graph.add(new WriteNode(addressDisplacedMark, DISPLACED_MARK_WORD_LOCATION, loadDisplacedHeader, BarrierType.NONE));
            graph.addBeforeFixed(migrationEnd, writeStackSlot);
            // load the lock object from the osr buffer
            AddressNode addressLockObject = createOffsetAddress(graph, buffer, offsetLockObject);
            ReadNode loadObject = graph.add(new ReadNode(addressLockObject, any(), lock.stamp(NodeView.DEFAULT), BarrierType.NONE));
            lock.replaceAndDelete(loadObject);
            graph.addBeforeFixed(migrationEnd, loadObject);
        }
        osrStart.replaceAtUsagesAndDelete(newStart);
    }
}

Example 3 with OSRMonitorEnterNode

use of org.graalvm.compiler.nodes.extended.OSRMonitorEnterNode in project graal by oracle.

the class LockEliminationPhase method run.

@Override
protected void run(StructuredGraph graph) {
    for (MonitorExitNode monitorExitNode : graph.getNodes(MonitorExitNode.TYPE)) {
        FixedNode next = monitorExitNode.next();
        if ((next instanceof MonitorEnterNode || next instanceof RawMonitorEnterNode)) {
            // start
            assert !(next instanceof OSRMonitorEnterNode);
            AccessMonitorNode monitorEnterNode = (AccessMonitorNode) next;
            if (GraphUtil.unproxify(monitorEnterNode.object()) == GraphUtil.unproxify(monitorExitNode.object())) {
                /*
                     * We've coarsened the lock so use the same monitor id for the whole region,
                     * otherwise the monitor operations appear to be unrelated.
                     */
                MonitorIdNode enterId = monitorEnterNode.getMonitorId();
                MonitorIdNode exitId = monitorExitNode.getMonitorId();
                if (enterId != exitId) {
                    enterId.replaceAndDelete(exitId);
                }
                GraphUtil.removeFixedWithUnusedInputs(monitorEnterNode);
                GraphUtil.removeFixedWithUnusedInputs(monitorExitNode);
            }
        }
    }
}