Examples with ActionPushVlan org.opendaylight.genius.mdsalutil.actions.ActionPushVlan used on opensource projects

Example 1 with ActionPushVlan

use of org.opendaylight.genius.mdsalutil.actions.ActionPushVlan in project netvirt by opendaylight.

the class NaptEventHandler method prepareAndSendPacketOut.

private void prepareAndSendPacketOut(NAPTEntryEvent naptEntryEvent, Long routerId) {
    // Send Packetout - tcp or udp packets which got punted to controller.
    BigInteger metadata = naptEntryEvent.getPacketReceived().getMatch().getMetadata().getMetadata();
    byte[] inPayload = naptEntryEvent.getPacketReceived().getPayload();
    Ethernet ethPkt = new Ethernet();
    if (inPayload != null) {
        try {
            ethPkt.deserialize(inPayload, 0, inPayload.length * NetUtils.NUM_BITS_IN_A_BYTE);
        } catch (PacketException e) {
            LOG.error("prepareAndSendPacketOut : Failed to decode Packet", e);
            return;
        }
    }
    long portTag = MetaDataUtil.getLportFromMetadata(metadata).intValue();
    LOG.debug("prepareAndSendPacketOut : portTag from incoming packet is {}", portTag);
    String interfaceName = getInterfaceNameFromTag(portTag);
    LOG.debug("prepareAndSendPacketOut : interfaceName fetched from portTag is {}", interfaceName);
    org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.interfaces.rev140508.interfaces.Interface iface = null;
    int vlanId = 0;
    iface = interfaceManager.getInterfaceInfoFromConfigDataStore(interfaceName);
    if (iface == null) {
        LOG.error("prepareAndSendPacketOut : Unable to read interface {} from config DataStore", interfaceName);
        return;
    }
    List<ActionInfo> actionInfos = new ArrayList<>();
    IfL2vlan ifL2vlan = iface.getAugmentation(IfL2vlan.class);
    if (ifL2vlan != null && ifL2vlan.getVlanId() != null) {
        vlanId = ifL2vlan.getVlanId().getValue() == null ? 0 : ifL2vlan.getVlanId().getValue();
    }
    InterfaceInfo infInfo = interfaceManager.getInterfaceInfoFromOperationalDataStore(interfaceName);
    if (infInfo == null) {
        LOG.error("prepareAndSendPacketOut : error in getting interfaceInfo from Operation DS");
        return;
    }
    byte[] pktOut = buildNaptPacketOut(ethPkt);
    if (ethPkt.getEtherType() != (short) NwConstants.ETHTYPE_802_1Q) {
        // VLAN Access port
        LOG.debug("prepareAndSendPacketOut : vlanId is {}", vlanId);
        if (vlanId != 0) {
            // Push vlan
            actionInfos.add(new ActionPushVlan(0));
            actionInfos.add(new ActionSetFieldVlanVid(1, vlanId));
        } else {
            LOG.debug("prepareAndSendPacketOut : No vlanId {}, may be untagged", vlanId);
        }
    } else {
        // VLAN Trunk Port
        LOG.debug("prepareAndSendPacketOut : This is VLAN Trunk port case - need not do VLAN tagging again");
    }
    if (pktOut != null) {
        String routerName = NatUtil.getRouterName(dataBroker, routerId);
        long tunId = NatUtil.getTunnelIdForNonNaptToNaptFlow(dataBroker, elanManager, idManager, routerId, routerName);
        sendNaptPacketOut(pktOut, infInfo, actionInfos, tunId);
    } else {
        LOG.warn("prepareAndSendPacketOut : Unable to send Packet Out");
    }
}

Example 2 with ActionPushVlan

use of org.opendaylight.genius.mdsalutil.actions.ActionPushVlan in project netvirt by opendaylight.

the class NexthopManager method getEgressActionsForInterface.

protected List<ActionInfo> getEgressActionsForInterface(final String ifName, int actionKey) {
    List<ActionInfo> listActionInfo = new ArrayList<>();
    try {
        Future<RpcResult<GetEgressActionsForInterfaceOutput>> result = interfaceManager.getEgressActionsForInterface(new GetEgressActionsForInterfaceInputBuilder().setIntfName(ifName).build());
        RpcResult<GetEgressActionsForInterfaceOutput> rpcResult = result.get();
        if (!rpcResult.isSuccessful()) {
            LOG.error("RPC Call to Get egress actions for interface {} returned with Errors {}", ifName, rpcResult.getErrors());
        } else {
            List<org.opendaylight.yang.gen.v1.urn.opendaylight.action.types.rev131112.action.list.Action> actions = rpcResult.getResult().getAction();
            for (Action action : actions) {
                actionKey = action.getKey().getOrder() + actionKey;
                org.opendaylight.yang.gen.v1.urn.opendaylight.action.types.rev131112.action.Action actionClass = action.getAction();
                if (actionClass instanceof OutputActionCase) {
                    listActionInfo.add(new ActionOutput(actionKey, ((OutputActionCase) actionClass).getOutputAction().getOutputNodeConnector()));
                } else if (actionClass instanceof PushVlanActionCase) {
                    listActionInfo.add(new ActionPushVlan(actionKey));
                } else if (actionClass instanceof SetFieldCase) {
                    if (((SetFieldCase) actionClass).getSetField().getVlanMatch() != null) {
                        int vlanVid = ((SetFieldCase) actionClass).getSetField().getVlanMatch().getVlanId().getVlanId().getValue();
                        listActionInfo.add(new ActionSetFieldVlanVid(actionKey, vlanVid));
                    }
                } else if (actionClass instanceof NxActionResubmitRpcAddGroupCase) {
                    Short tableId = ((NxActionResubmitRpcAddGroupCase) actionClass).getNxResubmit().getTable();
                    listActionInfo.add(new ActionNxResubmit(actionKey, tableId));
                } else if (actionClass instanceof NxActionRegLoadNodesNodeTableFlowApplyActionsCase) {
                    NxRegLoad nxRegLoad = ((NxActionRegLoadNodesNodeTableFlowApplyActionsCase) actionClass).getNxRegLoad();
                    listActionInfo.add(new ActionRegLoad(actionKey, NxmNxReg6.class, nxRegLoad.getDst().getStart(), nxRegLoad.getDst().getEnd(), nxRegLoad.getValue().longValue()));
                }
            }
        }
    } catch (InterruptedException | ExecutionException e) {
        LOG.warn("Exception when egress actions for interface {}", ifName, e);
    }
    return listActionInfo;
}

Example 3 with ActionPushVlan

use of org.opendaylight.genius.mdsalutil.actions.ActionPushVlan in project genius by opendaylight.

the class IfmUtil method getEgressActionInfosForInterface.

/**
 * Returns the list of egress actions for a given interface.
 *
 * @param interfaceInfo the interface to look up
 * @param portNo port number
 * @param ifaceType the type of the interface
 * @param tunnelKey the tunnel key
 * @param actionKeyStart the start for the first key assigned for the new actions
 * @param isDefaultEgress if it is the default egress
 * @param ifIndex interface index
 * @param groupId group Id
 * @return list of actions for the interface
 */
// The following suppression is for javac, not for checkstyle
@SuppressWarnings("fallthrough")
@SuppressFBWarnings("SF_SWITCH_FALLTHROUGH")
public static List<ActionInfo> getEgressActionInfosForInterface(Interface interfaceInfo, String portNo, InterfaceInfo.InterfaceType ifaceType, Long tunnelKey, int actionKeyStart, boolean isDefaultEgress, int ifIndex, long groupId) {
    List<ActionInfo> result = new ArrayList<>();
    switch(ifaceType) {
        case MPLS_OVER_GRE:
        // fall through
        case GRE_TRUNK_INTERFACE:
            if (!isDefaultEgress) {
                // stores the value coming from a VXLAN tunnel
                if (tunnelKey == null) {
                    tunnelKey = 0L;
                }
            }
        // fall through
        case VXLAN_TRUNK_INTERFACE:
            if (!isDefaultEgress) {
                if (tunnelKey != null) {
                    result.add(new ActionSetFieldTunnelId(actionKeyStart++, BigInteger.valueOf(tunnelKey)));
                }
            } else {
                // For OF Tunnels default egress actions need to set tunnelIps
                IfTunnel ifTunnel = interfaceInfo.getAugmentation(IfTunnel.class);
                if (BooleanUtils.isTrue(ifTunnel.isTunnelRemoteIpFlow() && ifTunnel.getTunnelDestination() != null)) {
                    result.add(new ActionSetTunnelDestinationIp(actionKeyStart++, ifTunnel.getTunnelDestination()));
                }
                if (BooleanUtils.isTrue(ifTunnel.isTunnelSourceIpFlow() && ifTunnel.getTunnelSource() != null)) {
                    result.add(new ActionSetTunnelSourceIp(actionKeyStart++, ifTunnel.getTunnelSource()));
                }
            }
        // fall through
        case VLAN_INTERFACE:
            if (isDefaultEgress) {
                IfL2vlan vlanIface = interfaceInfo.getAugmentation(IfL2vlan.class);
                LOG.trace("get egress actions for l2vlan interface: {}", vlanIface);
                boolean isVlanTransparent = false;
                int vlanVid = 0;
                if (vlanIface != null) {
                    vlanVid = vlanIface.getVlanId() == null ? 0 : vlanIface.getVlanId().getValue();
                    isVlanTransparent = vlanIface.getL2vlanMode() == IfL2vlan.L2vlanMode.Transparent;
                }
                if (vlanVid != 0 && !isVlanTransparent) {
                    result.add(new ActionPushVlan(actionKeyStart++));
                    result.add(new ActionSetFieldVlanVid(actionKeyStart++, vlanVid));
                }
                result.add(new ActionOutput(actionKeyStart++, new Uri(portNo)));
            } else {
                addEgressActionInfosForInterface(ifIndex, actionKeyStart, result);
            }
            break;
        case LOGICAL_GROUP_INTERFACE:
            if (isDefaultEgress) {
                result.add(new ActionGroup(groupId));
            } else {
                addEgressActionInfosForInterface(ifIndex, actionKeyStart, result);
            }
            break;
        default:
            LOG.warn("Interface Type {} not handled yet", ifaceType);
            break;
    }
    return result;
}

Example 4 with ActionPushVlan

use of org.opendaylight.genius.mdsalutil.actions.ActionPushVlan in project netvirt by opendaylight.

the class NatUtil method getEgressActionsForInterface.

@Nonnull
public static List<ActionInfo> getEgressActionsForInterface(OdlInterfaceRpcService interfaceManager, String ifName, Long tunnelKey, int pos) {
    LOG.debug("getEgressActionsForInterface : called for interface {}", ifName);
    GetEgressActionsForInterfaceInputBuilder egressActionsBuilder = new GetEgressActionsForInterfaceInputBuilder().setIntfName(ifName);
    if (tunnelKey != null) {
        egressActionsBuilder.setTunnelKey(tunnelKey);
    }
    List<ActionInfo> listActionInfo = new ArrayList<>();
    try {
        Future<RpcResult<GetEgressActionsForInterfaceOutput>> result = interfaceManager.getEgressActionsForInterface(egressActionsBuilder.build());
        RpcResult<GetEgressActionsForInterfaceOutput> rpcResult = result.get();
        if (!rpcResult.isSuccessful()) {
            LOG.error("getEgressActionsForInterface : RPC Call to Get egress actions for interface {} " + "returned with Errors {}", ifName, rpcResult.getErrors());
        } else {
            List<Action> actions = rpcResult.getResult().getAction();
            for (Action action : actions) {
                org.opendaylight.yang.gen.v1.urn.opendaylight.action.types.rev131112.action.Action actionClass = action.getAction();
                if (actionClass instanceof OutputActionCase) {
                    listActionInfo.add(new ActionOutput(pos++, ((OutputActionCase) actionClass).getOutputAction().getOutputNodeConnector()));
                } else if (actionClass instanceof PushVlanActionCase) {
                    listActionInfo.add(new ActionPushVlan(pos++));
                } else if (actionClass instanceof SetFieldCase) {
                    if (((SetFieldCase) actionClass).getSetField().getVlanMatch() != null) {
                        int vlanVid = ((SetFieldCase) actionClass).getSetField().getVlanMatch().getVlanId().getVlanId().getValue();
                        listActionInfo.add(new ActionSetFieldVlanVid(pos++, vlanVid));
                    }
                } else if (actionClass instanceof NxActionResubmitRpcAddGroupCase) {
                    Short tableId = ((NxActionResubmitRpcAddGroupCase) actionClass).getNxResubmit().getTable();
                    listActionInfo.add(new ActionNxResubmit(pos++, tableId));
                } else if (actionClass instanceof NxActionRegLoadNodesNodeTableFlowApplyActionsCase) {
                    NxRegLoad nxRegLoad = ((NxActionRegLoadNodesNodeTableFlowApplyActionsCase) actionClass).getNxRegLoad();
                    listActionInfo.add(new ActionRegLoad(pos++, NxmNxReg6.class, nxRegLoad.getDst().getStart(), nxRegLoad.getDst().getEnd(), nxRegLoad.getValue().longValue()));
                }
            }
        }
    } catch (InterruptedException | ExecutionException e) {
        LOG.error("Exception when egress actions for interface {}", ifName, e);
    }
    return listActionInfo;
}

Example 5 with ActionPushVlan

use of org.opendaylight.genius.mdsalutil.actions.ActionPushVlan in project genius by opendaylight.

the class MdSalUtilTest method createGroupEntity.

public GroupEntity createGroupEntity(String nodeid, String inport, int vlanid) {
    List<BucketInfo> listBucketInfo = new ArrayList<>();
    List<ActionInfo> listActionInfo = new ArrayList<>();
    if (vlanid > 0) {
        listActionInfo.add(new ActionPushVlan());
        listActionInfo.add(new ActionSetFieldVlanVid(vlanid));
    }
    listActionInfo.add(new ActionOutput(new Uri(inport), 65535));
    listBucketInfo.add(new BucketInfo(listActionInfo));
    String groupName = "Test Group";
    BigInteger dpnId = new BigInteger(nodeid.split(":")[1]);
    long id = getUniqueValue(nodeid, inport);
    return MDSALUtil.buildGroupEntity(dpnId, id, groupName, GroupTypes.GroupIndirect, listBucketInfo);
}