Examples with Builder org.openkilda.server42.control.messaging.Control.CommandPacket.Builder used on opensource projects

Example 6 with Builder

use of org.openkilda.server42.control.messaging.Control.CommandPacket.Builder in project open-kilda by telstra.

the class Gate method removeFlow.

private void removeFlow(String flowId, FlowDirection direction) throws InvalidProtocolBufferException {
    Builder builder = CommandPacket.newBuilder();
    Flow flow = Flow.newBuilder().setFlowId(flowId).setDirection(FlowDirection.toBoolean(direction)).build();
    FlowRttControl.RemoveFlow removeFlow = FlowRttControl.RemoveFlow.newBuilder().setFlow(flow).build();
    builder.setType(Type.REMOVE_FLOW);
    builder.addCommand(Any.pack(removeFlow));
    CommandPacket packet = builder.build();
    zeroMqClient.send(packet);
}

Example 7 with Builder

use of org.openkilda.server42.control.messaging.Control.CommandPacket.Builder in project open-kilda by telstra.

the class Gate method listen.

@KafkaHandler
void listen(@Payload AddFlow data, @Header(KafkaHeaders.RECEIVED_MESSAGE_KEY) String switchIdKey) {
    SwitchId switchId = new SwitchId(switchIdKey);
    Builder builder = CommandPacket.newBuilder();
    Flow flow = Flow.newBuilder().setFlowId(data.getFlowId()).setEncapsulationType(Flow.EncapsulationType.VLAN).setTunnelId(data.getTunnelId()).setTransitEncapsulationType(Flow.EncapsulationType.VLAN).setInnerTunnelId(data.getInnerTunnelId()).setTransitTunnelId(switchToVlanMap.get(switchIdKey)).setDirection(FlowDirection.toBoolean(data.getDirection())).setUdpSrcPort(flowRttUdpSrcPortOffset + data.getPort()).setDstMac(switchId.toMacAddress()).setHashCode(data.hashCode()).build();
    FlowRttControl.AddFlow addFlow = FlowRttControl.AddFlow.newBuilder().setFlow(flow).build();
    builder.setType(Type.ADD_FLOW);
    builder.addCommand(Any.pack(addFlow));
    CommandPacket packet = builder.build();
    try {
        zeroMqClient.send(packet);
    } catch (InvalidProtocolBufferException e) {
        log.error("Marshalling error on {}", data);
    }
}

Example 8 with Builder

use of org.openkilda.server42.control.messaging.Control.CommandPacket.Builder in project open-kilda by telstra.

the class Gate method listen.

@KafkaHandler
void listen(ClearFlows data, @Header(KafkaHeaders.RECEIVED_MESSAGE_KEY) String switchIdKey) {
    Builder builder = CommandPacket.newBuilder();
    builder.setType(Type.CLEAR_FLOWS);
    SwitchId switchId = new SwitchId(switchIdKey);
    FlowRttControl.ClearFlowsFilter clearFlowsFilter = FlowRttControl.ClearFlowsFilter.newBuilder().setDstMac(switchId.toMacAddress()).build();
    builder.addCommand(Any.pack(clearFlowsFilter));
    try {
        zeroMqClient.send(builder.build());
    } catch (InvalidProtocolBufferException e) {
        log.error("Marshalling error on {}", data);
    }
}

Example 9 with Builder

use of org.openkilda.server42.control.messaging.Control.CommandPacket.Builder in project open-kilda by telstra.

the class GateTest method listFlowsTest.

@Test
public void listFlowsTest() throws Exception {
    Builder commandPacketResponseBuilded = CommandPacketResponse.newBuilder();
    Flow flow1 = Flow.newBuilder().setFlowId("some-flow-id-01").build();
    Flow flow2 = Flow.newBuilder().setFlowId("some-flow-id-02").build();
    commandPacketResponseBuilded.addResponse(Any.pack(flow1));
    commandPacketResponseBuilded.addResponse(Any.pack(flow2));
    CommandPacketResponse commandPacketResponse = commandPacketResponseBuilded.build();
    when(zeroMqClient.send(argThat(commandPacket -> commandPacket.getType() == Type.LIST_FLOWS))).thenReturn(commandPacketResponse);
    String switchId = "00:00:1b:45:18:d6:71:5a";
    Headers headers = Headers.builder().correlationId("some-correlation-id").build();
    gate.listen(new ListFlowsRequest(headers), switchId);
    ArgumentCaptor<ListFlowsResponse> argument = ArgumentCaptor.forClass(ListFlowsResponse.class);
    verify(template).send(eq(toStorm), argument.capture());
    ListFlowsResponse response = argument.getValue();
    assertThat(response.getFlowIds()).contains(flow1.getFlowId(), flow2.getFlowId());
}

Example 10 with Builder

use of org.openkilda.server42.control.messaging.Control.CommandPacket.Builder in project open-kilda by telstra.

the class ControlServer method run.

/**
 * We get commands from zmq socket and execute them one by one.
 */
@Override
public void run() {
    log.info("started");
    try (ZContext context = new ZContext()) {
        Socket server = context.createSocket(ZMQ.REP);
        server.bind(bindEndpoint);
        while (!isInterrupted()) {
            byte[] request = server.recv();
            try {
                CommandPacket commandPacket = CommandPacket.parseFrom(request);
                Builder builder = CommandPacketResponse.newBuilder();
                builder.setCommunicationId(commandPacket.getCommunicationId());
                log.info("command type {}", commandPacket.getType().toString());
                log.info("flow list before {}", flows.keySet().toString());
                switch(commandPacket.getType()) {
                    case ADD_FLOW:
                        for (Any any : commandPacket.getCommandList()) {
                            AddFlow addFlow = any.unpack(AddFlow.class);
                            flows.put(FlowKey.fromFlow(addFlow.getFlow()), addFlow.getFlow());
                            statsServer.addFlow(addFlow.getFlow());
                        }
                        break;
                    case REMOVE_FLOW:
                        for (Any any : commandPacket.getCommandList()) {
                            RemoveFlow removeFlow = any.unpack(RemoveFlow.class);
                            FlowKey flowKey = FlowKey.fromFlow(removeFlow.getFlow());
                            flows.remove(flowKey);
                            statsServer.removeFlow(flowKey);
                        }
                        break;
                    case CLEAR_FLOWS:
                        if (commandPacket.getCommandCount() > 0) {
                            Any command = commandPacket.getCommand(0);
                            ClearFlowsFilter filter = command.unpack(ClearFlowsFilter.class);
                            List<FlowKey> keys = flows.values().stream().filter(flow -> flow.getDstMac().equals(filter.getDstMac())).map(FlowKey::fromFlow).collect(Collectors.toList());
                            flows.keySet().removeAll(keys);
                            keys.forEach(statsServer::removeFlow);
                        } else {
                            flows.clear();
                            statsServer.clearFlows();
                        }
                        break;
                    case LIST_FLOWS:
                        if (commandPacket.getCommandCount() > 0) {
                            Any command = commandPacket.getCommand(0);
                            ListFlowsFilter filter = command.unpack(ListFlowsFilter.class);
                            flows.values().stream().filter(flow -> flow.getDstMac().equals(filter.getDstMac())).forEach(flow -> builder.addResponse(Any.pack(flow)));
                        } else {
                            for (Flow flow : flows.values()) {
                                builder.addResponse(Any.pack(flow));
                            }
                        }
                        break;
                    case PUSH_SETTINGS:
                        log.warn("will be shipped with stats application");
                        Any command = commandPacket.getCommand(0);
                        PushSettings settings = command.unpack(PushSettings.class);
                        log.info(settings.toString());
                        break;
                    case ADD_ISL:
                        for (Any any : commandPacket.getCommandList()) {
                            AddIsl addIsl = any.unpack(AddIsl.class);
                            IslEndpoint endpoint = addIsl.getIsl();
                            isls.computeIfAbsent(endpoint.getSwitchId(), k -> new HashSet<>()).add(endpoint.getPort());
                            statsServer.addIsl(endpoint.getSwitchId(), endpoint.getPort());
                        }
                        break;
                    case REMOVE_ISL:
                        for (Any any : commandPacket.getCommandList()) {
                            RemoveIsl removeIsl = any.unpack(RemoveIsl.class);
                            IslEndpoint endpoint = removeIsl.getIsl();
                            isls.getOrDefault(endpoint.getSwitchId(), emptySet()).remove(endpoint.getPort());
                            statsServer.removeIsl(endpoint.getSwitchId(), endpoint.getPort());
                        }
                        break;
                    case CLEAR_ISLS:
                        if (commandPacket.getCommandCount() > 0) {
                            ClearIslsFilter filter = commandPacket.getCommand(0).unpack(ClearIslsFilter.class);
                            Set<Integer> ports = Optional.ofNullable(isls.get(filter.getSwitchId())).orElse(emptySet());
                            isls.remove(filter.getSwitchId());
                            ports.forEach(p -> statsServer.removeIsl(filter.getSwitchId(), p));
                        } else {
                            isls.clear();
                            statsServer.clearIsls();
                        }
                        break;
                    case LIST_ISLS:
                        if (commandPacket.getCommandCount() > 0) {
                            ListIslsFilter filter = commandPacket.getCommand(0).unpack(ListIslsFilter.class);
                            Optional.ofNullable(isls.get(filter.getSwitchId())).orElse(emptySet()).forEach(port -> builder.addResponse(Any.pack(IslEndpoint.newBuilder().setSwitchId(filter.getSwitchId()).setPort(port).build())));
                        } else {
                            isls.forEach((switchId, ports) -> ports.forEach(port -> builder.addResponse(Any.pack(IslEndpoint.newBuilder().setSwitchId(switchId).setPort(port).build()))));
                        }
                        break;
                    case UNRECOGNIZED:
                    default:
                        log.error("Unknown command type");
                        break;
                }
                log.info("flow list after {}", flows.keySet().toString());
                server.send(builder.build().toByteArray());
            } catch (InvalidProtocolBufferException e) {
                log.error("marshalling error");
            }
        }
    }
}