Examples with DefaultFareServiceFactory org.opentripplanner.routing.impl.DefaultFareServiceFactory used on opensource projects

Example 1 with DefaultFareServiceFactory

use of org.opentripplanner.routing.impl.DefaultFareServiceFactory in project OpenTripPlanner by opentripplanner.

the class GTFSPatternHopFactory method run.

/**
 * Generate the edges. Assumes that there are already vertices in the graph for the stops.
 */
public void run(Graph graph) {
    if (fareServiceFactory == null) {
        fareServiceFactory = new DefaultFareServiceFactory();
    }
    fareServiceFactory.processGtfs(_dao);
    // TODO: Why are we loading stops? The Javadoc above says this method assumes stops are aleady loaded.
    loadStops(graph);
    loadPathways(graph);
    loadFeedInfo(graph);
    loadAgencies(graph);
    // TODO: Why is there cached "data", and why are we clearing it? Due to a general lack of comments, I have no idea.
    // Perhaps it is to allow name collisions with previously loaded feeds.
    clearCachedData();
    /* Assign 0-based numeric codes to all GTFS service IDs. */
    for (AgencyAndId serviceId : _dao.getAllServiceIds()) {
        // TODO: FIX Service code collision for multiple feeds.
        graph.serviceCodes.put(serviceId, graph.serviceCodes.size());
    }
    LOG.debug("building hops from trips");
    Collection<Trip> trips = _dao.getAllTrips();
    int tripCount = 0;
    /* First, record which trips are used by one or more frequency entries.
         * These trips will be ignored for the purposes of non-frequency routing, and
         * all the frequency entries referencing the same trip can be added at once to the same
         * Timetable/TripPattern.
         */
    ListMultimap<Trip, Frequency> frequenciesForTrip = ArrayListMultimap.create();
    for (Frequency freq : _dao.getAllFrequencies()) {
        frequenciesForTrip.put(freq.getTrip(), freq);
    }
    /* Then loop over all trips, handling each one as a frequency-based or scheduled trip. */
    int freqCount = 0;
    int nonFreqCount = 0;
    /* The hops don't actually exist when we build their geometries, but we have to build their geometries
         * below, before we throw away the modified stopTimes, saving only the tripTimes (which don't have enough
         * information to build a geometry). So we keep them here.
         *
         *  A trip pattern actually does not have a single geometry, but one per hop, so we store an array.
         *  FIXME _why_ doesn't it have a single geometry?
         */
    Map<TripPattern, LineString[]> geometriesByTripPattern = Maps.newHashMap();
    TRIP: for (Trip trip : trips) {
        if (++tripCount % 100000 == 0) {
            LOG.debug("loading trips {}/{}", tripCount, trips.size());
        }
        // TODO: move to a validator module
        if (!_calendarService.getServiceIds().contains(trip.getServiceId())) {
            LOG.warn(graph.addBuilderAnnotation(new TripUndefinedService(trip)));
            // Invalid trip, skip it, it will break later
            continue TRIP;
        }
        /* Fetch the stop times for this trip. Copy the list since it's immutable. */
        List<StopTime> stopTimes = new ArrayList<StopTime>(_dao.getStopTimesForTrip(trip));
        /* GTFS stop times frequently contain duplicate, missing, or incorrect entries. Repair them. */
        TIntList removedStopSequences = removeRepeatedStops(stopTimes);
        if (!removedStopSequences.isEmpty()) {
            LOG.warn(graph.addBuilderAnnotation(new RepeatedStops(trip, removedStopSequences)));
        }
        filterStopTimes(stopTimes, graph);
        interpolateStopTimes(stopTimes);
        /* If after filtering this trip does not contain at least 2 stoptimes, it does not serve any purpose. */
        if (stopTimes.size() < 2) {
            LOG.warn(graph.addBuilderAnnotation(new TripDegenerate(trip)));
            continue TRIP;
        }
        /* Try to get the direction id for the trip, set to -1 if not found */
        int directionId;
        try {
            directionId = Integer.parseInt(trip.getDirectionId());
        } catch (NumberFormatException e) {
            LOG.debug("Trip {} does not have direction id, defaults to -1");
            directionId = -1;
        }
        /* Get the existing TripPattern for this filtered StopPattern, or create one. */
        StopPattern stopPattern = new StopPattern(stopTimes);
        TripPattern tripPattern = findOrCreateTripPattern(stopPattern, trip.getRoute(), directionId);
        /* Create a TripTimes object for this list of stoptimes, which form one trip. */
        TripTimes tripTimes = new TripTimes(trip, stopTimes, graph.deduplicator);
        /* If this trip is referenced by one or more lines in frequencies.txt, wrap it in a FrequencyEntry. */
        List<Frequency> frequencies = frequenciesForTrip.get(trip);
        if (frequencies != null && !(frequencies.isEmpty())) {
            for (Frequency freq : frequencies) {
                tripPattern.add(new FrequencyEntry(freq, tripTimes));
                freqCount++;
            }
        // TODO replace: createGeometry(graph, trip, stopTimes, hops);
        } else /* This trip was not frequency-based. Add the TripTimes directly to the TripPattern's scheduled timetable. */
        {
            tripPattern.add(tripTimes);
            nonFreqCount++;
        }
        // there would be a trip pattern with no geometry yet because it failed some of these tests
        if (!geometriesByTripPattern.containsKey(tripPattern) && trip.getShapeId() != null && trip.getShapeId().getId() != null && !trip.getShapeId().getId().equals("")) {
            // save the geometry to later be applied to the hops
            geometriesByTripPattern.put(tripPattern, createGeometry(graph, trip, stopTimes));
        }
    }
    // end foreach TRIP
    LOG.info("Added {} frequency-based and {} single-trip timetable entries.", freqCount, nonFreqCount);
    graph.hasFrequencyService = graph.hasFrequencyService || freqCount > 0;
    graph.hasScheduledService = graph.hasScheduledService || nonFreqCount > 0;
    /* Generate unique human-readable names for all the TableTripPatterns. */
    TripPattern.generateUniqueNames(tripPatterns.values());
    /* Generate unique short IDs for all the TableTripPatterns. */
    TripPattern.generateUniqueIds(tripPatterns.values());
    /* Loop over all new TripPatterns, creating edges, setting the service codes and geometries, etc. */
    for (TripPattern tripPattern : tripPatterns.values()) {
        tripPattern.makePatternVerticesAndEdges(graph, context.stationStopNodes);
        // Add the geometries to the hop edges.
        LineString[] geom = geometriesByTripPattern.get(tripPattern);
        if (geom != null) {
            for (int i = 0; i < tripPattern.hopEdges.length; i++) {
                tripPattern.hopEdges[i].setGeometry(geom[i]);
            }
            // Make a geometry for the whole TripPattern from all its constituent hops.
            // This happens only if geometry is found in geometriesByTripPattern,
            // because that means that geometry was created from shapes instead "as crow flies"
            tripPattern.makeGeometry();
        }
        // TODO this could be more elegant
        tripPattern.setServiceCodes(graph.serviceCodes);
        /* Iterate over all stops in this pattern recording mode information. */
        TraverseMode mode = GtfsLibrary.getTraverseMode(tripPattern.route);
        for (TransitStop tstop : tripPattern.stopVertices) {
            tstop.addMode(mode);
            if (mode == TraverseMode.SUBWAY) {
                tstop.setStreetToStopTime(subwayAccessTime);
            }
            graph.addTransitMode(mode);
        }
    }
    /* Identify interlined trips and create the necessary edges. */
    interline(tripPatterns.values(), graph);
    /* Interpret the transfers explicitly defined in transfers.txt. */
    loadTransfers(graph);
    /* Store parent stops in graph, even if not linked. These are needed for clustering*/
    for (TransitStationStop stop : context.stationStopNodes.values()) {
        if (stop instanceof TransitStation) {
            TransitStation parentStopVertex = (TransitStation) stop;
            graph.parentStopById.put(parentStopVertex.getStopId(), parentStopVertex.getStop());
        }
    }
    // it is already done at deserialization, but standalone mode allows using graphs without serializing them.
    for (TripPattern tableTripPattern : tripPatterns.values()) {
        tableTripPattern.scheduledTimetable.finish();
    }
    // eh?
    clearCachedData();
    graph.putService(FareService.class, fareServiceFactory.makeFareService());
    graph.putService(OnBoardDepartService.class, new OnBoardDepartServiceImpl());
}