Search in sources :

Example 1 with RunUnder

use of com.google.devtools.build.lib.analysis.config.RunUnder in project bazel by bazelbuild.

the class RunCommand method exec.

@Override
public ExitCode exec(CommandEnvironment env, OptionsProvider options) {
    RunOptions runOptions = options.getOptions(RunOptions.class);
    // This list should look like: ["//executable:target", "arg1", "arg2"]
    List<String> targetAndArgs = options.getResidue();
    // The user must at the least specify an executable target.
    if (targetAndArgs.isEmpty()) {
        env.getReporter().handle(Event.error("Must specify a target to run"));
        return ExitCode.COMMAND_LINE_ERROR;
    }
    String targetString = targetAndArgs.get(0);
    List<String> runTargetArgs = targetAndArgs.subList(1, targetAndArgs.size());
    RunUnder runUnder = options.getOptions(BuildConfiguration.Options.class).runUnder;
    OutErr outErr = env.getReporter().getOutErr();
    List<String> targets = (runUnder != null) && (runUnder.getLabel() != null) ? ImmutableList.of(targetString, runUnder.getLabel().toString()) : ImmutableList.of(targetString);
    BuildRequest request = BuildRequest.create(this.getClass().getAnnotation(Command.class).name(), options, env.getRuntime().getStartupOptionsProvider(), targets, outErr, env.getCommandId(), env.getCommandStartTime());
    currentRunUnder = runUnder;
    BuildResult result;
    try {
        result = processRequest(env, request);
    } finally {
        currentRunUnder = null;
    }
    if (!result.getSuccess()) {
        env.getReporter().handle(Event.error("Build failed. Not running target"));
        return result.getExitCondition();
    }
    // Make sure that we have exactly 1 built target (excluding --run_under),
    // and that it is executable.
    // These checks should only fail if keepGoing is true, because we already did
    // validation before the build began.  See {@link #validateTargets()}.
    Collection<ConfiguredTarget> targetsBuilt = result.getSuccessfulTargets();
    ConfiguredTarget targetToRun = null;
    ConfiguredTarget runUnderTarget = null;
    if (targetsBuilt != null) {
        int maxTargets = runUnder != null && runUnder.getLabel() != null ? 2 : 1;
        if (targetsBuilt.size() > maxTargets) {
            env.getReporter().handle(Event.error(SINGLE_TARGET_MESSAGE));
            return ExitCode.COMMAND_LINE_ERROR;
        }
        for (ConfiguredTarget target : targetsBuilt) {
            ExitCode targetValidation = fullyValidateTarget(env, target);
            if (!targetValidation.equals(ExitCode.SUCCESS)) {
                return targetValidation;
            }
            if (runUnder != null && target.getLabel().equals(runUnder.getLabel())) {
                if (runUnderTarget != null) {
                    env.getReporter().handle(Event.error(null, "Can't identify the run_under target from multiple options?"));
                    return ExitCode.COMMAND_LINE_ERROR;
                }
                runUnderTarget = target;
            } else if (targetToRun == null) {
                targetToRun = target;
            } else {
                env.getReporter().handle(Event.error(SINGLE_TARGET_MESSAGE));
                return ExitCode.COMMAND_LINE_ERROR;
            }
        }
    }
    // Handle target & run_under referring to the same target.
    if ((targetToRun == null) && (runUnderTarget != null)) {
        targetToRun = runUnderTarget;
    }
    if (targetToRun == null) {
        env.getReporter().handle(Event.error(NO_TARGET_MESSAGE));
        return ExitCode.COMMAND_LINE_ERROR;
    }
    Path executablePath = Preconditions.checkNotNull(targetToRun.getProvider(FilesToRunProvider.class).getExecutable().getPath());
    BuildConfiguration configuration = targetToRun.getConfiguration();
    if (configuration == null) {
        // The target may be an input file, which doesn't have a configuration. In that case, we
        // choose any target configuration.
        configuration = result.getBuildConfigurationCollection().getTargetConfigurations().get(0);
    }
    Path workingDir;
    try {
        workingDir = ensureRunfilesBuilt(env, targetToRun);
    } catch (CommandException e) {
        env.getReporter().handle(Event.error("Error creating runfiles: " + e.getMessage()));
        return ExitCode.LOCAL_ENVIRONMENTAL_ERROR;
    }
    List<String> args = runTargetArgs;
    FilesToRunProvider provider = targetToRun.getProvider(FilesToRunProvider.class);
    RunfilesSupport runfilesSupport = provider == null ? null : provider.getRunfilesSupport();
    if (runfilesSupport != null && runfilesSupport.getArgs() != null) {
        List<String> targetArgs = runfilesSupport.getArgs();
        if (!targetArgs.isEmpty()) {
            args = Lists.newArrayListWithCapacity(targetArgs.size() + runTargetArgs.size());
            args.addAll(targetArgs);
            args.addAll(runTargetArgs);
        }
    }
    String productName = env.getRuntime().getProductName();
    //
    // We now have a unique executable ready to be run.
    //
    // We build up two different versions of the command to run: one with an absolute path, which
    // we'll actually run, and a prettier one with the long absolute path to the executable
    // replaced with a shorter relative path that uses the symlinks in the workspace.
    PathFragment prettyExecutablePath = OutputDirectoryLinksUtils.getPrettyPath(executablePath, env.getWorkspaceName(), env.getWorkspace(), options.getOptions(BuildRequestOptions.class).getSymlinkPrefix(productName), productName);
    List<String> cmdLine = new ArrayList<>();
    if (runOptions.scriptPath == null) {
        PathFragment processWrapperPath = env.getBlazeWorkspace().getBinTools().getExecPath(PROCESS_WRAPPER);
        Preconditions.checkNotNull(processWrapperPath, PROCESS_WRAPPER + " not found in embedded tools");
        cmdLine.add(env.getExecRoot().getRelative(processWrapperPath).getPathString());
        cmdLine.add("-1");
        cmdLine.add("15");
        cmdLine.add("-");
        cmdLine.add("-");
    }
    List<String> prettyCmdLine = new ArrayList<>();
    // at the start of the command line.
    if (runUnder != null) {
        String runUnderValue = runUnder.getValue();
        if (runUnderTarget != null) {
            // --run_under specifies a target. Get the corresponding executable.
            // This must be an absolute path, because the run_under target is only
            // in the runfiles of test targets.
            runUnderValue = runUnderTarget.getProvider(FilesToRunProvider.class).getExecutable().getPath().getPathString();
            // If the run_under command contains any options, make sure to add them
            // to the command line as well.
            List<String> opts = runUnder.getOptions();
            if (!opts.isEmpty()) {
                runUnderValue += " " + ShellEscaper.escapeJoinAll(opts);
            }
        }
        cmdLine.add(configuration.getShellExecutable().getPathString());
        cmdLine.add("-c");
        cmdLine.add(runUnderValue + " " + executablePath.getPathString() + " " + ShellEscaper.escapeJoinAll(args));
        prettyCmdLine.add(configuration.getShellExecutable().getPathString());
        prettyCmdLine.add("-c");
        prettyCmdLine.add(runUnderValue + " " + prettyExecutablePath.getPathString() + " " + ShellEscaper.escapeJoinAll(args));
    } else {
        cmdLine.add(executablePath.getPathString());
        cmdLine.addAll(args);
        prettyCmdLine.add(prettyExecutablePath.getPathString());
        prettyCmdLine.addAll(args);
    }
    // Add a newline between the blaze output and the binary's output.
    outErr.printErrLn("");
    if (runOptions.scriptPath != null) {
        String unisolatedCommand = CommandFailureUtils.describeCommand(CommandDescriptionForm.COMPLETE_UNISOLATED, cmdLine, null, workingDir.getPathString());
        if (writeScript(env, runOptions.scriptPath, unisolatedCommand)) {
            return ExitCode.SUCCESS;
        } else {
            return ExitCode.RUN_FAILURE;
        }
    }
    env.getReporter().handle(Event.info(null, "Running command line: " + ShellEscaper.escapeJoinAll(prettyCmdLine)));
    com.google.devtools.build.lib.shell.Command command = new CommandBuilder().addArgs(cmdLine).setEnv(env.getClientEnv()).setWorkingDir(workingDir).build();
    try {
        // Restore a raw EventHandler if it is registered. This allows for blaze run to produce the
        // actual output of the command being run even if --color=no is specified.
        env.getReporter().switchToAnsiAllowingHandler();
        // The command API is a little strange in that the following statement
        // will return normally only if the program exits with exit code 0.
        // If it ends with any other code, we have to catch BadExitStatusException.
        command.execute(com.google.devtools.build.lib.shell.Command.NO_INPUT, com.google.devtools.build.lib.shell.Command.NO_OBSERVER, outErr.getOutputStream(), outErr.getErrorStream(), true).getTerminationStatus().getExitCode();
        return ExitCode.SUCCESS;
    } catch (BadExitStatusException e) {
        String message = "Non-zero return code '" + e.getResult().getTerminationStatus().getExitCode() + "' from command: " + e.getMessage();
        env.getReporter().handle(Event.error(message));
        return ExitCode.RUN_FAILURE;
    } catch (AbnormalTerminationException e) {
        // The process was likely terminated by a signal in this case.
        return ExitCode.INTERRUPTED;
    } catch (CommandException e) {
        env.getReporter().handle(Event.error("Error running program: " + e.getMessage()));
        return ExitCode.RUN_FAILURE;
    }
}
Also used : BuildRequestOptions(com.google.devtools.build.lib.buildtool.BuildRequest.BuildRequestOptions) RunUnder(com.google.devtools.build.lib.analysis.config.RunUnder) FilesToRunProvider(com.google.devtools.build.lib.analysis.FilesToRunProvider) ExitCode(com.google.devtools.build.lib.util.ExitCode) PathFragment(com.google.devtools.build.lib.vfs.PathFragment) ArrayList(java.util.ArrayList) BuildConfiguration(com.google.devtools.build.lib.analysis.config.BuildConfiguration) RunfilesSupport(com.google.devtools.build.lib.analysis.RunfilesSupport) AbnormalTerminationException(com.google.devtools.build.lib.shell.AbnormalTerminationException) BadExitStatusException(com.google.devtools.build.lib.shell.BadExitStatusException) Path(com.google.devtools.build.lib.vfs.Path) OutErr(com.google.devtools.build.lib.util.io.OutErr) ConfiguredTarget(com.google.devtools.build.lib.analysis.ConfiguredTarget) CommandException(com.google.devtools.build.lib.shell.CommandException) BuildRequest(com.google.devtools.build.lib.buildtool.BuildRequest) BuildResult(com.google.devtools.build.lib.buildtool.BuildResult) CommandBuilder(com.google.devtools.build.lib.util.CommandBuilder)

Example 2 with RunUnder

use of com.google.devtools.build.lib.analysis.config.RunUnder in project bazel by bazelbuild.

the class DarwinSandboxedStrategy method getRunUnderPath.

/**
   * If a --run_under= option is set and refers to a command via its path (as opposed to via its
   * label), we have to mount this. Note that this is best effort and works fine for shell scripts
   * and small binaries, but we can't track any further dependencies of this command.
   *
   * <p>If --run_under= refers to a label, it is automatically provided in the spawn's input files,
   * so mountInputs() will catch that case.
   */
private Path getRunUnderPath(Spawn spawn) {
    if (spawn.getResourceOwner() instanceof TestRunnerAction) {
        TestRunnerAction testRunnerAction = ((TestRunnerAction) spawn.getResourceOwner());
        RunUnder runUnder = testRunnerAction.getExecutionSettings().getRunUnder();
        if (runUnder != null && runUnder.getCommand() != null) {
            PathFragment sourceFragment = new PathFragment(runUnder.getCommand());
            Path mount;
            if (sourceFragment.isAbsolute()) {
                mount = blazeDirs.getFileSystem().getPath(sourceFragment);
            } else if (blazeDirs.getExecRoot().getRelative(sourceFragment).exists()) {
                mount = blazeDirs.getExecRoot().getRelative(sourceFragment);
            } else {
                List<Path> searchPath = SearchPath.parse(blazeDirs.getFileSystem(), clientEnv.get("PATH"));
                mount = SearchPath.which(searchPath, runUnder.getCommand());
            }
            // only need to hardlink when under workspace
            Path workspace = blazeDirs.getWorkspace();
            if (mount != null && mount.startsWith(workspace)) {
                return mount;
            }
        }
    }
    return null;
}
Also used : SearchPath(com.google.devtools.build.lib.vfs.SearchPath) Path(com.google.devtools.build.lib.vfs.Path) RunUnder(com.google.devtools.build.lib.analysis.config.RunUnder) PathFragment(com.google.devtools.build.lib.vfs.PathFragment) TestRunnerAction(com.google.devtools.build.lib.rules.test.TestRunnerAction) ImmutableList(com.google.common.collect.ImmutableList) List(java.util.List)

Example 3 with RunUnder

use of com.google.devtools.build.lib.analysis.config.RunUnder in project bazel by bazelbuild.

the class TestRunnerAction method computeKey.

@Override
protected String computeKey() {
    Fingerprint f = new Fingerprint();
    f.addString(GUID);
    f.addStrings(executionSettings.getArgs());
    f.addString(executionSettings.getTestFilter() == null ? "" : executionSettings.getTestFilter());
    RunUnder runUnder = executionSettings.getRunUnder();
    f.addString(runUnder == null ? "" : runUnder.getValue());
    f.addStringMap(getTestEnv());
    f.addString(testProperties.getSize().toString());
    f.addString(testProperties.getTimeout().toString());
    f.addStrings(testProperties.getTags());
    f.addInt(testProperties.isLocal() ? 1 : 0);
    f.addInt(shardNum);
    f.addInt(executionSettings.getTotalShards());
    f.addInt(runNumber);
    f.addInt(configuration.getRunsPerTestForLabel(getOwner().getLabel()));
    f.addInt(configuration.isCodeCoverageEnabled() ? 1 : 0);
    return f.hexDigestAndReset();
}
Also used : Fingerprint(com.google.devtools.build.lib.util.Fingerprint) RunUnder(com.google.devtools.build.lib.analysis.config.RunUnder)

Aggregations

RunUnder (com.google.devtools.build.lib.analysis.config.RunUnder)3 Path (com.google.devtools.build.lib.vfs.Path)2 PathFragment (com.google.devtools.build.lib.vfs.PathFragment)2 ImmutableList (com.google.common.collect.ImmutableList)1 ConfiguredTarget (com.google.devtools.build.lib.analysis.ConfiguredTarget)1 FilesToRunProvider (com.google.devtools.build.lib.analysis.FilesToRunProvider)1 RunfilesSupport (com.google.devtools.build.lib.analysis.RunfilesSupport)1 BuildConfiguration (com.google.devtools.build.lib.analysis.config.BuildConfiguration)1 BuildRequest (com.google.devtools.build.lib.buildtool.BuildRequest)1 BuildRequestOptions (com.google.devtools.build.lib.buildtool.BuildRequest.BuildRequestOptions)1 BuildResult (com.google.devtools.build.lib.buildtool.BuildResult)1 TestRunnerAction (com.google.devtools.build.lib.rules.test.TestRunnerAction)1 AbnormalTerminationException (com.google.devtools.build.lib.shell.AbnormalTerminationException)1 BadExitStatusException (com.google.devtools.build.lib.shell.BadExitStatusException)1 CommandException (com.google.devtools.build.lib.shell.CommandException)1 CommandBuilder (com.google.devtools.build.lib.util.CommandBuilder)1 ExitCode (com.google.devtools.build.lib.util.ExitCode)1 Fingerprint (com.google.devtools.build.lib.util.Fingerprint)1 OutErr (com.google.devtools.build.lib.util.io.OutErr)1 SearchPath (com.google.devtools.build.lib.vfs.SearchPath)1