use of com.taobao.android.dx.rop.code.SourcePosition in project atlas by alibaba.
the class BlockAddresses method setupArrays.
/**
* Sets up the address arrays.
*/
private void setupArrays(RopMethod method) {
BasicBlockList blocks = method.getBlocks();
int sz = blocks.size();
for (int i = 0; i < sz; i++) {
BasicBlock one = blocks.get(i);
int label = one.getLabel();
Insn insn = one.getInsns().get(0);
starts[label] = new CodeAddress(insn.getPosition());
SourcePosition pos = one.getLastInsn().getPosition();
lasts[label] = new CodeAddress(pos);
ends[label] = new CodeAddress(pos);
}
}
use of com.taobao.android.dx.rop.code.SourcePosition in project atlas by alibaba.
the class Ropper method addExceptionSetupBlocks.
/**
* Creates the exception handler setup blocks. "maxLocals"
* below is because that's the register number corresponding
* to the sole element on a one-deep stack (which is the
* situation at the start of an exception handler block).
*/
private void addExceptionSetupBlocks() {
int len = catchInfos.length;
for (int i = 0; i < len; i++) {
CatchInfo catches = catchInfos[i];
if (catches != null) {
for (ExceptionHandlerSetup one : catches.getSetups()) {
Insn proto = labelToBlock(i).getFirstInsn();
SourcePosition pos = proto.getPosition();
InsnList il = new InsnList(2);
Insn insn = new PlainInsn(Rops.opMoveException(one.getCaughtType()), pos, RegisterSpec.make(maxLocals, one.getCaughtType()), RegisterSpecList.EMPTY);
il.set(0, insn);
insn = new PlainInsn(Rops.GOTO, pos, null, RegisterSpecList.EMPTY);
il.set(1, insn);
il.setImmutable();
BasicBlock bb = new BasicBlock(one.getLabel(), il, IntList.makeImmutable(i), i);
addBlock(bb, startFrames[i].getSubroutines());
}
}
}
}
use of com.taobao.android.dx.rop.code.SourcePosition in project atlas by alibaba.
the class Ropper method addSynchExceptionHandlerBlock.
/**
* Constructs and adds, if necessary, the catch-all exception handler
* block to deal with unwinding the lock taken on entry to a synchronized
* method.
*/
private void addSynchExceptionHandlerBlock() {
if (!synchNeedsExceptionHandler) {
/*
* The method being converted either isn't synchronized or
* can't possibly throw exceptions in its main body, so
* there's no need for a synchronized method exception
* handler.
*/
return;
}
SourcePosition pos = method.makeSourcePosistion(0);
RegisterSpec exReg = RegisterSpec.make(0, Type.THROWABLE);
BasicBlock bb;
Insn insn;
InsnList insns = new InsnList(2);
insn = new PlainInsn(Rops.opMoveException(Type.THROWABLE), pos, exReg, RegisterSpecList.EMPTY);
insns.set(0, insn);
insn = new ThrowingInsn(Rops.MONITOR_EXIT, pos, RegisterSpecList.make(getSynchReg()), StdTypeList.EMPTY);
insns.set(1, insn);
insns.setImmutable();
int label2 = getSpecialLabel(SYNCH_CATCH_2);
bb = new BasicBlock(getSpecialLabel(SYNCH_CATCH_1), insns, IntList.makeImmutable(label2), label2);
addBlock(bb, IntList.EMPTY);
insns = new InsnList(1);
insn = new ThrowingInsn(Rops.THROW, pos, RegisterSpecList.make(exReg), StdTypeList.EMPTY);
insns.set(0, insn);
insns.setImmutable();
bb = new BasicBlock(label2, insns, IntList.EMPTY, -1);
addBlock(bb, IntList.EMPTY);
}
use of com.taobao.android.dx.rop.code.SourcePosition in project atlas by alibaba.
the class RopperMachine method run.
/**
* {@inheritDoc}
*/
@Override
public void run(Frame frame, int offset, int opcode) {
/*
* This is the stack pointer after the opcode's arguments have been
* popped.
*/
int stackPointer = maxLocals + frame.getStack().size();
// The sources have to be retrieved before super.run() gets called.
RegisterSpecList sources = getSources(opcode, stackPointer);
int sourceCount = sources.size();
super.run(frame, offset, opcode);
SourcePosition pos = method.makeSourcePosistion(offset);
RegisterSpec localTarget = getLocalTarget(opcode == ByteOps.ISTORE);
int destCount = resultCount();
RegisterSpec dest;
if (destCount == 0) {
dest = null;
switch(opcode) {
case ByteOps.POP:
case ByteOps.POP2:
{
// These simply don't appear in the rop form.
return;
}
}
} else if (localTarget != null) {
dest = localTarget;
} else if (destCount == 1) {
dest = RegisterSpec.make(stackPointer, result(0));
} else {
/*
* This clause only ever applies to the stack manipulation
* ops that have results (that is, dup* and swap but not
* pop*).
*
* What we do is first move all the source registers into
* the "temporary stack" area defined for the method, and
* then move stuff back down onto the main "stack" in the
* arrangement specified by the stack op pattern.
*
* Note: This code ends up emitting a lot of what will
* turn out to be superfluous moves (e.g., moving back and
* forth to the same local when doing a dup); however,
* that makes this code a bit easier (and goodness knows
* it doesn't need any extra complexity), and all the SSA
* stuff is going to want to deal with this sort of
* superfluous assignment anyway, so it should be a wash
* in the end.
*/
int scratchAt = ropper.getFirstTempStackReg();
RegisterSpec[] scratchRegs = new RegisterSpec[sourceCount];
for (int i = 0; i < sourceCount; i++) {
RegisterSpec src = sources.get(i);
TypeBearer type = src.getTypeBearer();
RegisterSpec scratch = src.withReg(scratchAt);
insns.add(new PlainInsn(Rops.opMove(type), pos, scratch, src));
scratchRegs[i] = scratch;
scratchAt += src.getCategory();
}
for (int pattern = getAuxInt(); pattern != 0; pattern >>= 4) {
int which = (pattern & 0x0f) - 1;
RegisterSpec scratch = scratchRegs[which];
TypeBearer type = scratch.getTypeBearer();
insns.add(new PlainInsn(Rops.opMove(type), pos, scratch.withReg(stackPointer), scratch));
stackPointer += type.getType().getCategory();
}
return;
}
TypeBearer destType = (dest != null) ? dest : Type.VOID;
Constant cst = getAuxCst();
int ropOpcode;
Rop rop;
Insn insn;
if (opcode == ByteOps.MULTIANEWARRAY) {
blockCanThrow = true;
// Add the extra instructions for handling multianewarray.
extraBlockCount = 6;
/*
* Add an array constructor for the int[] containing all the
* dimensions.
*/
RegisterSpec dimsReg = RegisterSpec.make(dest.getNextReg(), Type.INT_ARRAY);
rop = Rops.opFilledNewArray(Type.INT_ARRAY, sourceCount);
insn = new ThrowingCstInsn(rop, pos, sources, catches, CstType.INT_ARRAY);
insns.add(insn);
// Add a move-result for the new-filled-array
rop = Rops.opMoveResult(Type.INT_ARRAY);
insn = new PlainInsn(rop, pos, dimsReg, RegisterSpecList.EMPTY);
insns.add(insn);
/*
* Add a const-class instruction for the specified array
* class.
*/
/*
* Remove as many dimensions from the originally specified
* class as are given in the explicit list of dimensions,
* so as to pass the right component class to the standard
* Java library array constructor.
*/
Type componentType = ((CstType) cst).getClassType();
for (int i = 0; i < sourceCount; i++) {
componentType = componentType.getComponentType();
}
RegisterSpec classReg = RegisterSpec.make(dest.getReg(), Type.CLASS);
if (componentType.isPrimitive()) {
/*
* The component type is primitive (e.g., int as opposed
* to Integer), so we have to fetch the corresponding
* TYPE class.
*/
CstFieldRef typeField = CstFieldRef.forPrimitiveType(componentType);
insn = new ThrowingCstInsn(Rops.GET_STATIC_OBJECT, pos, RegisterSpecList.EMPTY, catches, typeField);
} else {
/*
* The component type is an object type, so just make a
* normal class reference.
*/
insn = new ThrowingCstInsn(Rops.CONST_OBJECT, pos, RegisterSpecList.EMPTY, catches, new CstType(componentType));
}
insns.add(insn);
// Add a move-result-pseudo for the get-static or const
rop = Rops.opMoveResultPseudo(classReg.getType());
insn = new PlainInsn(rop, pos, classReg, RegisterSpecList.EMPTY);
insns.add(insn);
/*
* Add a call to the "multianewarray method," that is,
* Array.newInstance(class, dims). Note: The result type
* of newInstance() is Object, which is why the last
* instruction in this sequence is a cast to the right
* type for the original instruction.
*/
RegisterSpec objectReg = RegisterSpec.make(dest.getReg(), Type.OBJECT);
insn = new ThrowingCstInsn(Rops.opInvokeStatic(MULTIANEWARRAY_METHOD.getPrototype()), pos, RegisterSpecList.make(classReg, dimsReg), catches, MULTIANEWARRAY_METHOD);
insns.add(insn);
// Add a move-result.
rop = Rops.opMoveResult(MULTIANEWARRAY_METHOD.getPrototype().getReturnType());
insn = new PlainInsn(rop, pos, objectReg, RegisterSpecList.EMPTY);
insns.add(insn);
/*
* And finally, set up for the remainder of this method to
* add an appropriate cast.
*/
opcode = ByteOps.CHECKCAST;
sources = RegisterSpecList.make(objectReg);
} else if (opcode == ByteOps.JSR) {
// JSR has no Rop instruction
hasJsr = true;
return;
} else if (opcode == ByteOps.RET) {
try {
returnAddress = (ReturnAddress) arg(0);
} catch (ClassCastException ex) {
throw new RuntimeException("Argument to RET was not a ReturnAddress", ex);
}
// RET has no Rop instruction.
return;
}
ropOpcode = jopToRopOpcode(opcode, cst);
rop = Rops.ropFor(ropOpcode, destType, sources, cst);
Insn moveResult = null;
if (dest != null && rop.isCallLike()) {
/*
* We're going to want to have a move-result in the next
* basic block.
*/
extraBlockCount++;
moveResult = new PlainInsn(Rops.opMoveResult(((CstMethodRef) cst).getPrototype().getReturnType()), pos, dest, RegisterSpecList.EMPTY);
dest = null;
} else if (dest != null && rop.canThrow()) {
/*
* We're going to want to have a move-result-pseudo in the
* next basic block.
*/
extraBlockCount++;
moveResult = new PlainInsn(Rops.opMoveResultPseudo(dest.getTypeBearer()), pos, dest, RegisterSpecList.EMPTY);
dest = null;
}
if (ropOpcode == RegOps.NEW_ARRAY) {
/*
* In the original bytecode, this was either a primitive
* array constructor "newarray" or an object array
* constructor "anewarray". In the former case, there is
* no explicit constant, and in the latter, the constant
* is for the element type and not the array type. The rop
* instruction form for both of these is supposed to be
* the resulting array type, so we initialize / alter
* "cst" here, accordingly. Conveniently enough, the rop
* opcode already gets constructed with the proper array
* type.
*/
cst = CstType.intern(rop.getResult());
} else if ((cst == null) && (sourceCount == 2)) {
TypeBearer firstType = sources.get(0).getTypeBearer();
TypeBearer lastType = sources.get(1).getTypeBearer();
if ((lastType.isConstant() || firstType.isConstant()) && advice.hasConstantOperation(rop, sources.get(0), sources.get(1))) {
if (lastType.isConstant()) {
/*
* The target architecture has an instruction that can
* build in the constant found in the second argument,
* so pull it out of the sources and just use it as a
* constant here.
*/
cst = (Constant) lastType;
sources = sources.withoutLast();
// For subtraction, change to addition and invert constant
if (rop.getOpcode() == RegOps.SUB) {
ropOpcode = RegOps.ADD;
CstInteger cstInt = (CstInteger) lastType;
cst = CstInteger.make(-cstInt.getValue());
}
} else {
/*
* The target architecture has an instruction that can
* build in the constant found in the first argument,
* so pull it out of the sources and just use it as a
* constant here.
*/
cst = (Constant) firstType;
sources = sources.withoutFirst();
}
rop = Rops.ropFor(ropOpcode, destType, sources, cst);
}
}
SwitchList cases = getAuxCases();
ArrayList<Constant> initValues = getInitValues();
boolean canThrow = rop.canThrow();
blockCanThrow |= canThrow;
if (cases != null) {
if (cases.size() == 0) {
// It's a default-only switch statement. It can happen!
insn = new PlainInsn(Rops.GOTO, pos, null, RegisterSpecList.EMPTY);
primarySuccessorIndex = 0;
} else {
IntList values = cases.getValues();
insn = new SwitchInsn(rop, pos, dest, sources, values);
primarySuccessorIndex = values.size();
}
} else if (ropOpcode == RegOps.RETURN) {
/*
* Returns get turned into the combination of a move (if
* non-void and if the return doesn't already mention
* register 0) and a goto (to the return block).
*/
if (sources.size() != 0) {
RegisterSpec source = sources.get(0);
TypeBearer type = source.getTypeBearer();
if (source.getReg() != 0) {
insns.add(new PlainInsn(Rops.opMove(type), pos, RegisterSpec.make(0, type), source));
}
}
insn = new PlainInsn(Rops.GOTO, pos, null, RegisterSpecList.EMPTY);
primarySuccessorIndex = 0;
updateReturnOp(rop, pos);
returns = true;
} else if (cst != null) {
if (canThrow) {
insn = new ThrowingCstInsn(rop, pos, sources, catches, cst);
catchesUsed = true;
primarySuccessorIndex = catches.size();
} else {
insn = new PlainCstInsn(rop, pos, dest, sources, cst);
}
} else if (canThrow) {
insn = new ThrowingInsn(rop, pos, sources, catches);
catchesUsed = true;
if (opcode == ByteOps.ATHROW) {
/*
* The op athrow is the only one where it's possible
* to have non-empty successors and yet not have a
* primary successor.
*/
primarySuccessorIndex = -1;
} else {
primarySuccessorIndex = catches.size();
}
} else {
insn = new PlainInsn(rop, pos, dest, sources);
}
insns.add(insn);
if (moveResult != null) {
insns.add(moveResult);
}
/*
* If initValues is non-null, it means that the parser has
* seen a group of compatible constant initialization
* bytecodes that are applied to the current newarray. The
* action we take here is to convert these initialization
* bytecodes into a single fill-array-data ROP which lays out
* all the constant values in a table.
*/
if (initValues != null) {
extraBlockCount++;
insn = new FillArrayDataInsn(Rops.FILL_ARRAY_DATA, pos, RegisterSpecList.make(moveResult.getResult()), initValues, cst);
insns.add(insn);
}
}
use of com.taobao.android.dx.rop.code.SourcePosition in project atlas by alibaba.
the class DebugInfoEncoder method emitPosition.
/**
* Emits the necessary byte sequences to emit the given position table
* entry. This will typically be a single special opcode, although
* it may also require DBG_ADVANCE_PC or DBG_ADVANCE_LINE.
*
* @param entry position entry to emit.
* @throws IOException
*/
private void emitPosition(PositionList.Entry entry) throws IOException {
SourcePosition pos = entry.getPosition();
int newLine = pos.getLine();
int newAddress = entry.getAddress();
int opcode;
int deltaLines = newLine - line;
int deltaAddress = newAddress - address;
if (deltaAddress < 0) {
throw new RuntimeException("Position entries must be in ascending address order");
}
if ((deltaLines < DBG_LINE_BASE) || (deltaLines > (DBG_LINE_BASE + DBG_LINE_RANGE - 1))) {
emitAdvanceLine(deltaLines);
deltaLines = 0;
}
opcode = computeOpcode(deltaLines, deltaAddress);
if ((opcode & ~0xff) > 0) {
emitAdvancePc(deltaAddress);
deltaAddress = 0;
opcode = computeOpcode(deltaLines, deltaAddress);
if ((opcode & ~0xff) > 0) {
emitAdvanceLine(deltaLines);
deltaLines = 0;
opcode = computeOpcode(deltaLines, deltaAddress);
}
}
output.writeByte(opcode);
line += deltaLines;
address += deltaAddress;
if (annotateTo != null || debugPrint != null) {
annotate(1, String.format("%04x: line %d", address, line));
}
}
Aggregations