use of won.bot.framework.eventbot.action.impl.lifecycle.SignalWorkDoneAction in project webofneeds by researchstudio-sat.
the class DuplicateMessageSendingConversationBot method initializeEventListeners.
@Override
protected void initializeEventListeners() {
EventListenerContext ctx = getDuplicateMessageSenderDecorator(getEventListenerContext());
final EventBus bus = getEventBus();
// we're not expecting any failure messages in this test:
bus.subscribe(FailureResponseEvent.class, new ActionOnEventListener(ctx, new BaseEventBotAction(ctx) {
@Override
protected void doRun(Event event, EventListener executingListener) throws Exception {
FailureResponseEvent failureResponseEvent = (FailureResponseEvent) event;
bus.publish(new TestFailedEvent(DuplicateMessageSendingConversationBot.this, "Message failed: " + failureResponseEvent.getOriginalMessageURI() + ": " + WonRdfUtils.MessageUtils.getTextMessage(failureResponseEvent.getFailureMessage())));
}
}));
// create needs every trigger execution until 2 needs are created
bus.subscribe(ActEvent.class, new ActionOnEventListener(ctx, new CreateNeedWithFacetsAction(ctx, getBotContextWrapper().getNeedCreateListName()), NO_OF_NEEDS));
// connect needs
bus.subscribe(NeedCreatedEvent.class, new ActionOnceAfterNEventsListener(ctx, "needConnector", NO_OF_NEEDS * 2, new ConnectFromListToListAction(ctx, getBotContextWrapper().getNeedCreateListName(), getBotContextWrapper().getNeedCreateListName(), FacetType.OwnerFacet.getURI(), FacetType.OwnerFacet.getURI(), MILLIS_BETWEEN_MESSAGES, "Hi!")));
// add a listener that is informed of the connect/open events and that auto-opens
// subscribe it to:
// * connect events - so it responds with open
// * open events - so it responds with open (if the open received was the first open, and we still need to accept the connection)
bus.subscribe(ConnectFromOtherNeedEvent.class, new ActionOnEventListener(ctx, new OpenConnectionAction(ctx, "Hi!")));
// add a listener that auto-responds to messages by a message
// after 10 messages, it unsubscribes from all events
// subscribe it to:
// * message events - so it responds
// * open events - so it initiates the chain reaction of responses
BaseEventListener autoResponder = new AutomaticMessageResponderListener(ctx, NO_OF_MESSAGES, MILLIS_BETWEEN_MESSAGES);
bus.subscribe(OpenFromOtherNeedEvent.class, autoResponder);
bus.subscribe(MessageFromOtherNeedEvent.class, autoResponder);
// add a listener that closes the connection after it has seen 10 messages
bus.subscribe(MessageFromOtherNeedEvent.class, new ActionOnceAfterNEventsListener(ctx, NO_OF_MESSAGES, new CloseConnectionAction(ctx, "Bye!")));
// add a listener that closes the connection when a failureEvent occurs
EventListener onFailureConnectionCloser = new ActionOnEventListener(ctx, new CloseConnectionAction(ctx, "Bye!"));
bus.subscribe(FailureResponseEvent.class, onFailureConnectionCloser);
// add a listener that auto-responds to a close message with a deactivation of both needs.
// subscribe it to:
// * close events
bus.subscribe(CloseFromOtherNeedEvent.class, new ActionOnEventListener(ctx, new MultipleActions(ctx, new DeactivateAllNeedsAction(ctx), new PublishEventAction(ctx, new TestPassedEvent(this))), 1));
// add a listener that counts two NeedDeactivatedEvents and then tells the
// framework that the bot's work is done
bus.subscribe(NeedDeactivatedEvent.class, new ActionOnceAfterNEventsListener(ctx, NO_OF_NEEDS, new SignalWorkDoneAction(ctx)));
}
use of won.bot.framework.eventbot.action.impl.lifecycle.SignalWorkDoneAction in project webofneeds by researchstudio-sat.
the class DuplicateMessageURIFailureBot method initializeEventListeners.
@Override
protected void initializeEventListeners() {
EventListenerContext ctx = getEventListenerContext();
EventBus bus = getEventBus();
// create needs every trigger execution until 2 needs are created
bus.subscribe(ActEvent.class, new ActionOnEventListener(ctx, new CreateNeedWithFacetsAction(// use a decorator that will cause the same need URI to be used in each create message
new ConstantNewEventURIDecorator(ctx, "constantMsgURI" + System.currentTimeMillis()), getBotContextWrapper().getNeedCreateListName()), 2));
// log error if we can create 2 needs
bus.subscribe(NeedCreatedEvent.class, new ActionOnceAfterNEventsListener(ctx, 2, new MultipleActions(ctx, new LogErrorAction(ctx, "Should not have been able to create 2 needs using message with identical URIs"), new PublishEventAction(ctx, new TestFailedEvent(this, "Should not have been able to create 2 needs with identical URI")))));
// log success if we could create 1 need
bus.subscribe(NeedCreatedEvent.class, new ActionOnFirstNEventsListener(ctx, 1, new MultipleActions(ctx, new LogAction(ctx, "Good: could create one need"), new PublishEventAction(ctx, new SuccessEvent()))));
// log success if we got an error for 2nd need
bus.subscribe(NeedCreationFailedEvent.class, new ActionOnFirstNEventsListener(ctx, 1, new MultipleActions(ctx, new LogAction(ctx, "Good: need creation failed for 2nd need."), new PublishEventAction(ctx, new SuccessEvent()))));
// when we have 2 SuccessEvents, we're done. Deacivate the needs and signal we're finished
bus.subscribe(SuccessEvent.class, new ActionOnceAfterNEventsListener(ctx, 2, new MultipleActions(ctx, new LogAction(ctx, "Test passed."), new PublishEventAction(ctx, new TestPassedEvent(this)), new DeactivateAllNeedsAction(ctx))));
// when we have a FailureEvent, we're done, too. Deacivate the needs and signal we're finished
bus.subscribe(TestFailedEvent.class, new ActionOnceAfterNEventsListener(ctx, 1, new MultipleActions(ctx, new LogAction(ctx, "Test failed."), new DeactivateAllNeedsAction(ctx))));
// wait for the needDeactivated event, then say we're done.
bus.subscribe(NeedDeactivatedEvent.class, new ActionOnceAfterNEventsListener(ctx, 1, new SignalWorkDoneAction(ctx, this)));
// TODO: fix: bot runs forever even if test fails.
// TODO: fix: need 1 is not deactivated if test fails.
}
use of won.bot.framework.eventbot.action.impl.lifecycle.SignalWorkDoneAction in project webofneeds by researchstudio-sat.
the class DuplicateNeedURIFailureBot method initializeEventListeners.
@Override
protected void initializeEventListeners() {
EventListenerContext ctx = getEventListenerContext();
EventBus bus = getEventBus();
// create needs every trigger execution until 2 needs are created
bus.subscribe(ActEvent.class, new ActionOnEventListener(ctx, new CreateNeedWithFacetsAction(// use a decorator that will cause the same need URI to be used in each create message
new ConstantNewNeedURIDecorator(ctx, "constantNeedURI" + System.currentTimeMillis()), getBotContextWrapper().getNeedCreateListName()), 2));
// log error if we can create 2 needs
bus.subscribe(NeedCreatedEvent.class, new ActionOnceAfterNEventsListener(ctx, 2, new MultipleActions(ctx, new LogErrorAction(ctx, "Should not have been able to create 2 needs with identical URI"), new PublishEventAction(ctx, new TestFailedEvent(this, "Should not have been able to create 2 needs with identical URI")))));
// log success if we could create 1 need
bus.subscribe(NeedCreatedEvent.class, new ActionOnFirstNEventsListener(ctx, 1, new MultipleActions(ctx, new LogAction(ctx, "Good: could create one need"), new PublishEventAction(ctx, new SuccessEvent()))));
// log success if we got an error for 2nd need
bus.subscribe(NeedCreationFailedEvent.class, new ActionOnFirstNEventsListener(ctx, 1, new MultipleActions(ctx, new LogAction(ctx, "Good: need creation failed for 2nd need."), new PublishEventAction(ctx, new SuccessEvent()))));
// when we have 2 SuccessEvents, we're done. Deacivate the needs and signal we're finished
bus.subscribe(SuccessEvent.class, new ActionOnceAfterNEventsListener(ctx, 2, new MultipleActions(ctx, new LogAction(ctx, "Test passed."), new PublishEventAction(ctx, new TestPassedEvent(this)), new DeactivateAllNeedsAction(ctx))));
// when we have a FailureEvent, we're done, too. Deacivate the needs and signal we're finished
bus.subscribe(TestFailedEvent.class, new ActionOnceAfterNEventsListener(ctx, 1, new MultipleActions(ctx, new LogAction(ctx, "Test failed."), new DeactivateAllNeedsAction(ctx))));
// wait for the needDeactivated event, then say we're done.
bus.subscribe(NeedDeactivatedEvent.class, new ActionOnceAfterNEventsListener(ctx, 1, new SignalWorkDoneAction(ctx, this)));
// TODO: fix: bot runs forever even if test fails.
// TODO: fix: need 1 is not deactivated if test fails.
}
use of won.bot.framework.eventbot.action.impl.lifecycle.SignalWorkDoneAction in project webofneeds by researchstudio-sat.
the class CommentBot method initializeEventListeners.
@Override
protected void initializeEventListeners() {
EventListenerContext ctx = getEventListenerContext();
final EventBus bus = getEventBus();
CommentBotContextWrapper botContextWrapper = (CommentBotContextWrapper) getBotContextWrapper();
// create needs every trigger execution until 2 needs are created
this.needCreator = new ActionOnEventListener(ctx, new CreateNeedWithFacetsAction(ctx, botContextWrapper.getNeedCreateListName()), NO_OF_NEEDS);
bus.subscribe(ActEvent.class, this.needCreator);
// count until 1 need is created, then create a comment facet
this.commentFacetCreator = new ActionOnEventListener(ctx, new CreateNeedWithFacetsAction(ctx, botContextWrapper.getCommentListName(), FacetType.CommentFacet.getURI()), 1);
bus.subscribe(NeedCreatedEvent.class, this.commentFacetCreator);
this.needConnector = new ActionOnceAfterNEventsListener(ctx, 2, new ConnectFromListToListAction(ctx, botContextWrapper.getNeedCreateListName(), botContextWrapper.getCommentListName(), FacetType.OwnerFacet.getURI(), FacetType.CommentFacet.getURI(), MILLIS_BETWEEN_MESSAGES, "Hi, I am the " + "CommentBot."));
bus.subscribe(NeedCreatedEvent.class, this.needConnector);
this.autoOpener = new ActionOnEventListener(ctx, new OpenConnectionAction(ctx, "Hi!"));
bus.subscribe(OpenFromOtherNeedEvent.class, this.autoOpener);
bus.subscribe(ConnectFromOtherNeedEvent.class, this.autoOpener);
BaseEventListener assertionRunner = new ActionOnceAfterNEventsListener(ctx, 1, new BaseEventBotAction(ctx) {
@Override
protected void doRun(final Event event, EventListener executingListener) throws Exception {
executeAssertionsForEstablishedConnectionInternal(bus);
}
});
bus.subscribe(OpenFromOtherNeedEvent.class, assertionRunner);
// deactivate all needs when the assertion was executed
this.allNeedsDeactivator = new ActionOnEventListener(ctx, new DeactivateAllNeedsAction(ctx), 1);
bus.subscribe(AssertionsExecutedEvent.class, this.allNeedsDeactivator);
// add a listener that counts two NeedDeactivatedEvents and then tells the
// framework that the bot's work is done
this.workDoneSignaller = new ActionOnceAfterNEventsListener(ctx, 2, new SignalWorkDoneAction(ctx));
bus.subscribe(NeedDeactivatedEvent.class, this.workDoneSignaller);
}
use of won.bot.framework.eventbot.action.impl.lifecycle.SignalWorkDoneAction in project webofneeds by researchstudio-sat.
the class ConversationBot method initializeEventListeners.
@Override
protected void initializeEventListeners() {
EventListenerContext ctx = getEventListenerContext();
EventBus bus = getEventBus();
// create needs every trigger execution until 2 needs are created
this.needCreator = new ActionOnEventListener(ctx, new CreateNeedWithFacetsAction(ctx, getBotContextWrapper().getNeedCreateListName()), NO_OF_NEEDS);
bus.subscribe(ActEvent.class, this.needCreator);
// count until 2 needs were created, then
// * connect the 2 needs
this.needConnector = new ActionOnceAfterNEventsListener(ctx, "needConnector", NO_OF_NEEDS, new ConnectFromListToListAction(ctx, ctx.getBotContextWrapper().getNeedCreateListName(), ctx.getBotContextWrapper().getNeedCreateListName(), FacetType.OwnerFacet.getURI(), FacetType.OwnerFacet.getURI(), MILLIS_BETWEEN_MESSAGES, "Hi, I am the ConversationBot."));
bus.subscribe(NeedCreatedEvent.class, this.needConnector);
// add a listener that is informed of the connect/open events and that auto-opens
// subscribe it to:
// * connect events - so it responds with open
// * open events - so it responds with open (if the open received was the first open, and we still need to accept the connection)
this.autoOpener = new ActionOnEventListener(ctx, new OpenConnectionAction(ctx, "Hi, I " + "am the ConversationBot, too!"));
bus.subscribe(ConnectFromOtherNeedEvent.class, this.autoOpener);
// add a listener that auto-responds to messages by a message
// after 10 messages, it unsubscribes from all events
// subscribe it to:
// * message events - so it responds
// * open events - so it initiates the chain reaction of responses
this.autoResponder = new AutomaticMessageResponderListener(ctx, NO_OF_MESSAGES, MILLIS_BETWEEN_MESSAGES);
bus.subscribe(OpenFromOtherNeedEvent.class, this.autoResponder);
bus.subscribe(MessageFromOtherNeedEvent.class, this.autoResponder);
// add a listener that closes the connection after it has seen 10 messages
this.connectionCloser = new ActionOnceAfterNEventsListener(ctx, NO_OF_MESSAGES, new CloseConnectionAction(ctx, "Bye!"));
bus.subscribe(MessageFromOtherNeedEvent.class, this.connectionCloser);
// add a listener that closes the connection when a failureEvent occurs
EventListener onFailureConnectionCloser = new ActionOnEventListener(ctx, new CloseConnectionAction(ctx, "Bye!"));
bus.subscribe(FailureResponseEvent.class, onFailureConnectionCloser);
// add a listener that auto-responds to a close message with a deactivation of both needs.
// subscribe it to:
// * close events
this.needDeactivator = new ActionOnEventListener(ctx, new DeactivateAllNeedsAction(ctx), 1);
bus.subscribe(CloseFromOtherNeedEvent.class, this.needDeactivator);
// add a listener that counts two NeedDeactivatedEvents and then tells the
// framework that the bot's work is done
this.workDoneSignaller = new ActionOnceAfterNEventsListener(ctx, NO_OF_NEEDS, new SignalWorkDoneAction(ctx));
bus.subscribe(NeedDeactivatedEvent.class, this.workDoneSignaller);
}
Aggregations