Examples with VCImage cbit.image.VCImage used on opensource projects

Example 1 with VCImage

use of cbit.image.VCImage in project vcell by virtualcell.

the class SmoldynFileWriter method writeHighResVolumeSamples.

private void writeHighResVolumeSamples() throws SolverException {
    try {
        printWriter.println("# HighResVolumeSamples");
        printWriter.println(VCellSmoldynKeyword.start_highResVolumeSamples);
        Origin origin = resampledGeometry.getOrigin();
        Extent extent = resampledGeometry.getExtent();
        int numSamples = 10000000;
        ISize sampleSize = GeometrySpec.calulateResetSamplingSize(3, extent, numSamples);
        VCImage vcImage = RayCaster.sampleGeometry(resampledGeometry, sampleSize, true);
        printWriter.println(VCellSmoldynKeyword.Origin + " " + origin.getX() + " " + origin.getY() + " " + origin.getZ());
        printWriter.println(VCellSmoldynKeyword.Size + " " + extent.getX() + " " + extent.getY() + " " + extent.getZ());
        printWriter.println(VCellSmoldynKeyword.CompartmentHighResPixelMap + " " + resampledGeometry.getGeometrySpec().getNumSubVolumes());
        VCPixelClass[] pixelclasses = vcImage.getPixelClasses();
        if (pixelclasses != null && resampledGeometry.getGeometrySpec().getSubVolumes() != null && pixelclasses.length != resampledGeometry.getGeometrySpec().getSubVolumes().length) {
            throw new SolverException("Fast mesh sampling failed. Found " + pixelclasses.length + " of " + resampledGeometry.getGeometrySpec().getSubVolumes().length + " volume domains.\n");
        }
        for (SubVolume subVolume : resampledGeometry.getGeometrySpec().getSubVolumes()) {
            for (VCPixelClass vcPixelClass : pixelclasses) {
                if (vcPixelClass.getPixel() == subVolume.getHandle()) {
                    printWriter.println(subVolume.getName() + " " + vcPixelClass.getPixel());
                    break;
                }
            }
        }
        printWriter.println(VCellSmoldynKeyword.VolumeSamples + " " + sampleSize.getX() + " " + sampleSize.getY() + " " + sampleSize.getZ());
        if (vcImage != null) {
            ByteArrayOutputStream bos = new ByteArrayOutputStream();
            DeflaterOutputStream dos = new DeflaterOutputStream(bos);
            byte[] pixels = vcImage.getPixels();
            dos.write(pixels, 0, pixels.length);
            dos.close();
            byte[] compressedPixels = bos.toByteArray();
            String compressedStr = Hex.toString(compressedPixels);
            int strchar = 250;
            int length = compressedStr.length();
            for (int i = 0; i < Math.ceil(length * 1.0 / strchar); ++i) {
                printWriter.println(compressedStr.substring(i * strchar, Math.min(length, (i + 1) * strchar)));
            }
        }
        printWriter.println(VCellSmoldynKeyword.end_highResVolumeSamples);
        printWriter.println();
    } catch (Exception ex) {
        ex.printStackTrace(System.out);
        throw new RuntimeException("Error writing High Resolution Volume Samples: " + ex.getMessage());
    }
}

Example 2 with VCImage

use of cbit.image.VCImage in project vcell by virtualcell.

the class SBMLImporter method addGeometry.

protected void addGeometry() {
    // get a Geometry object via SpatialModelPlugin object.
    org.sbml.jsbml.ext.spatial.Geometry sbmlGeometry = getSbmlGeometry();
    if (sbmlGeometry == null) {
        return;
    }
    int dimension = 0;
    Origin vcOrigin = null;
    Extent vcExtent = null;
    {
        // local code block
        // get a CoordComponent object via the Geometry object.
        ListOf<CoordinateComponent> listOfCoordComps = sbmlGeometry.getListOfCoordinateComponents();
        if (listOfCoordComps == null) {
            throw new RuntimeException("Cannot have 0 coordinate compartments in geometry");
        }
        // coord component
        double ox = 0.0;
        double oy = 0.0;
        double oz = 0.0;
        double ex = 1.0;
        double ey = 1.0;
        double ez = 1.0;
        for (CoordinateComponent coordComponent : listOfCoordComps) {
            double minValue = coordComponent.getBoundaryMinimum().getValue();
            double maxValue = coordComponent.getBoundaryMaximum().getValue();
            switch(coordComponent.getType()) {
                case cartesianX:
                    {
                        ox = minValue;
                        ex = maxValue - minValue;
                        break;
                    }
                case cartesianY:
                    {
                        oy = minValue;
                        ey = maxValue - minValue;
                        break;
                    }
                case cartesianZ:
                    {
                        oz = minValue;
                        ez = maxValue - minValue;
                        break;
                    }
            }
            dimension++;
        }
        vcOrigin = new Origin(ox, oy, oz);
        vcExtent = new Extent(ex, ey, ez);
    }
    // from geometry definition, find out which type of geometry : image or
    // analytic or CSG
    AnalyticGeometry analyticGeometryDefinition = null;
    CSGeometry csGeometry = null;
    SampledFieldGeometry segmentedSampledFieldGeometry = null;
    SampledFieldGeometry distanceMapSampledFieldGeometry = null;
    ParametricGeometry parametricGeometry = null;
    for (int i = 0; i < sbmlGeometry.getListOfGeometryDefinitions().size(); i++) {
        GeometryDefinition gd_temp = sbmlGeometry.getListOfGeometryDefinitions().get(i);
        if (!gd_temp.isSetIsActive()) {
            continue;
        }
        if (gd_temp instanceof AnalyticGeometry) {
            analyticGeometryDefinition = (AnalyticGeometry) gd_temp;
        } else if (gd_temp instanceof SampledFieldGeometry) {
            SampledFieldGeometry sfg = (SampledFieldGeometry) gd_temp;
            String sfn = sfg.getSampledField();
            ListOf<SampledField> sampledFields = sbmlGeometry.getListOfSampledFields();
            if (sampledFields.size() > 1) {
                throw new RuntimeException("only one sampled field supported");
            }
            InterpolationKind ik = sampledFields.get(0).getInterpolationType();
            switch(ik) {
                case linear:
                    distanceMapSampledFieldGeometry = sfg;
                    break;
                case nearestneighbor:
                    segmentedSampledFieldGeometry = sfg;
                    break;
                default:
                    lg.warn("Unsupported " + sampledFields.get(0).getName() + " interpolation type " + ik);
            }
        } else if (gd_temp instanceof CSGeometry) {
            csGeometry = (CSGeometry) gd_temp;
        } else if (gd_temp instanceof ParametricGeometry) {
            parametricGeometry = (ParametricGeometry) gd_temp;
        } else {
            throw new RuntimeException("unsupported geometry definition type " + gd_temp.getClass().getSimpleName());
        }
    }
    if (analyticGeometryDefinition == null && segmentedSampledFieldGeometry == null && distanceMapSampledFieldGeometry == null && csGeometry == null) {
        throw new SBMLImportException("VCell supports only Analytic, Image based (segmentd or distance map) or Constructed Solid Geometry at this time.");
    }
    GeometryDefinition selectedGeometryDefinition = null;
    if (csGeometry != null) {
        selectedGeometryDefinition = csGeometry;
    } else if (analyticGeometryDefinition != null) {
        selectedGeometryDefinition = analyticGeometryDefinition;
    } else if (segmentedSampledFieldGeometry != null) {
        selectedGeometryDefinition = segmentedSampledFieldGeometry;
    } else if (distanceMapSampledFieldGeometry != null) {
        selectedGeometryDefinition = distanceMapSampledFieldGeometry;
    } else if (parametricGeometry != null) {
        selectedGeometryDefinition = parametricGeometry;
    } else {
        throw new SBMLImportException("no geometry definition found");
    }
    Geometry vcGeometry = null;
    if (selectedGeometryDefinition == analyticGeometryDefinition || selectedGeometryDefinition == csGeometry) {
        vcGeometry = new Geometry("spatialGeom", dimension);
    } else if (selectedGeometryDefinition == distanceMapSampledFieldGeometry || selectedGeometryDefinition == segmentedSampledFieldGeometry) {
        SampledFieldGeometry sfg = (SampledFieldGeometry) selectedGeometryDefinition;
        // get image from sampledFieldGeometry
        // get a sampledVol object via the listOfSampledVol (from
        // SampledGeometry) object.
        // gcw gcw gcw
        String sfn = sfg.getSampledField();
        SampledField sf = null;
        for (SampledField sampledField : sbmlGeometry.getListOfSampledFields()) {
            if (sampledField.getSpatialId().equals(sfn)) {
                sf = sampledField;
            }
        }
        int numX = sf.getNumSamples1();
        int numY = sf.getNumSamples2();
        int numZ = sf.getNumSamples3();
        int[] samples = new int[sf.getSamplesLength()];
        StringTokenizer tokens = new StringTokenizer(sf.getSamples(), " ");
        int count = 0;
        while (tokens.hasMoreTokens()) {
            int sample = Integer.parseInt(tokens.nextToken());
            samples[count++] = sample;
        }
        byte[] imageInBytes = new byte[samples.length];
        if (selectedGeometryDefinition == distanceMapSampledFieldGeometry) {
            // 
            for (int i = 0; i < imageInBytes.length; i++) {
                // if (interpolation(samples[i])<0){
                if (samples[i] < 0) {
                    imageInBytes[i] = -1;
                } else {
                    imageInBytes[i] = 1;
                }
            }
        } else {
            for (int i = 0; i < imageInBytes.length; i++) {
                imageInBytes[i] = (byte) samples[i];
            }
        }
        try {
            // System.out.println("ident " + sf.getId() + " " + sf.getName());
            VCImage vcImage = null;
            CompressionKind ck = sf.getCompression();
            DataKind dk = sf.getDataType();
            if (ck == CompressionKind.deflated) {
                vcImage = new VCImageCompressed(null, imageInBytes, vcExtent, numX, numY, numZ);
            } else {
                switch(dk) {
                    case UINT8:
                    case UINT16:
                    case UINT32:
                        vcImage = new VCImageUncompressed(null, imageInBytes, vcExtent, numX, numY, numZ);
                    default:
                }
            }
            if (vcImage == null) {
                throw new SbmlException("Unsupported type combination " + ck + ", " + dk + " for sampled field " + sf.getName());
            }
            vcImage.setName(sf.getId());
            ListOf<SampledVolume> sampledVolumes = sfg.getListOfSampledVolumes();
            final int numSampledVols = sampledVolumes.size();
            if (numSampledVols == 0) {
                throw new RuntimeException("Cannot have 0 sampled volumes in sampledField (image_based) geometry");
            }
            // check to see if values are uniquely integer , add set up scaling if necessary
            double scaleFactor = checkPixelScaling(sampledVolumes, 1);
            if (scaleFactor != 1) {
                double checkScaleFactor = checkPixelScaling(sampledVolumes, scaleFactor);
                VCAssert.assertTrue(checkScaleFactor != scaleFactor, "Scale factor check failed");
            }
            VCPixelClass[] vcpixelClasses = new VCPixelClass[numSampledVols];
            // get pixel classes for geometry
            for (int i = 0; i < numSampledVols; i++) {
                SampledVolume sVol = sampledVolumes.get(i);
                // from subVolume, get pixelClass?
                final int scaled = (int) (scaleFactor * sVol.getSampledValue());
                vcpixelClasses[i] = new VCPixelClass(null, sVol.getDomainType(), scaled);
            }
            vcImage.setPixelClasses(vcpixelClasses);
            // now create image geometry
            vcGeometry = new Geometry("spatialGeom", vcImage);
        } catch (Exception e) {
            e.printStackTrace(System.out);
            throw new RuntimeException("Unable to create image from SampledFieldGeometry : " + e.getMessage());
        }
    }
    GeometrySpec vcGeometrySpec = vcGeometry.getGeometrySpec();
    vcGeometrySpec.setOrigin(vcOrigin);
    try {
        vcGeometrySpec.setExtent(vcExtent);
    } catch (PropertyVetoException e) {
        e.printStackTrace(System.out);
        throw new SBMLImportException("Unable to set extent on VC geometry : " + e.getMessage(), e);
    }
    // get listOfDomainTypes via the Geometry object.
    ListOf<DomainType> listOfDomainTypes = sbmlGeometry.getListOfDomainTypes();
    if (listOfDomainTypes == null || listOfDomainTypes.size() < 1) {
        throw new SBMLImportException("Cannot have 0 domainTypes in geometry");
    }
    // get a listOfDomains via the Geometry object.
    ListOf<Domain> listOfDomains = sbmlGeometry.getListOfDomains();
    if (listOfDomains == null || listOfDomains.size() < 1) {
        throw new SBMLImportException("Cannot have 0 domains in geometry");
    }
    // ListOfGeometryDefinitions listOfGeomDefns =
    // sbmlGeometry.getListOfGeometryDefinitions();
    // if ((listOfGeomDefns == null) ||
    // (sbmlGeometry.getNumGeometryDefinitions() > 1)) {
    // throw new
    // RuntimeException("Can have only 1 geometry definition in geometry");
    // }
    // use the boolean bAnalytic to create the right kind of subvolume.
    // First match the somVol=domainTypes for spDim=3. Deal witl spDim=2
    // afterwards.
    GeometrySurfaceDescription vcGsd = vcGeometry.getGeometrySurfaceDescription();
    Vector<DomainType> surfaceClassDomainTypesVector = new Vector<DomainType>();
    try {
        for (DomainType dt : listOfDomainTypes) {
            if (dt.getSpatialDimensions() == 3) {
                // subvolume
                if (selectedGeometryDefinition == analyticGeometryDefinition) {
                    // will set expression later - when reading in Analytic
                    // Volumes in GeometryDefinition
                    vcGeometrySpec.addSubVolume(new AnalyticSubVolume(dt.getId(), new Expression(1.0)));
                } else {
                // add SubVolumes later for CSG and Image-based
                }
            } else if (dt.getSpatialDimensions() == 2) {
                surfaceClassDomainTypesVector.add(dt);
            }
        }
        // analytic vol is needed to get the expression for subVols
        if (selectedGeometryDefinition == analyticGeometryDefinition) {
            // get an analyticVol object via the listOfAnalyticVol (from
            // AnalyticGeometry) object.
            ListOf<AnalyticVolume> aVolumes = analyticGeometryDefinition.getListOfAnalyticVolumes();
            if (aVolumes.size() < 1) {
                throw new SBMLImportException("Cannot have 0 Analytic volumes in analytic geometry");
            }
            for (AnalyticVolume analyticVol : aVolumes) {
                // get subVol from VC geometry using analyticVol spatialId;
                // set its expr using analyticVol's math.
                SubVolume vcSubvolume = vcGeometrySpec.getSubVolume(analyticVol.getDomainType());
                CastInfo<AnalyticSubVolume> ci = BeanUtils.attemptCast(AnalyticSubVolume.class, vcSubvolume);
                if (!ci.isGood()) {
                    throw new RuntimeException("analytic volume '" + analyticVol.getId() + "' does not map to any VC subvolume.");
                }
                AnalyticSubVolume asv = ci.get();
                try {
                    Expression subVolExpr = getExpressionFromFormula(analyticVol.getMath());
                    asv.setExpression(subVolExpr);
                } catch (ExpressionException e) {
                    e.printStackTrace(System.out);
                    throw new SBMLImportException("Unable to set expression on subVolume '" + asv.getName() + "'. " + e.getMessage(), e);
                }
            }
        }
        SampledFieldGeometry sfg = BeanUtils.downcast(SampledFieldGeometry.class, selectedGeometryDefinition);
        if (sfg != null) {
            ListOf<SampledVolume> sampledVolumes = sfg.getListOfSampledVolumes();
            int numSampledVols = sampledVolumes.size();
            if (numSampledVols == 0) {
                throw new SBMLImportException("Cannot have 0 sampled volumes in sampledField (image_based) geometry");
            }
            VCPixelClass[] vcpixelClasses = new VCPixelClass[numSampledVols];
            ImageSubVolume[] vcImageSubVols = new ImageSubVolume[numSampledVols];
            // get pixel classes for geometry
            int idx = 0;
            for (SampledVolume sVol : sampledVolumes) {
                // from subVolume, get pixelClass?
                final String name = sVol.getDomainType();
                final int pixelValue = SBMLUtils.ignoreZeroFraction(sVol.getSampledValue());
                VCPixelClass pc = new VCPixelClass(null, name, pixelValue);
                vcpixelClasses[idx] = pc;
                // Create the new Image SubVolume - use index of this for
                // loop as 'handle' for ImageSubVol?
                ImageSubVolume isv = new ImageSubVolume(null, pc, idx);
                isv.setName(name);
                vcImageSubVols[idx++] = isv;
            }
            vcGeometry.getGeometrySpec().setSubVolumes(vcImageSubVols);
        }
        if (selectedGeometryDefinition == csGeometry) {
            ListOf<org.sbml.jsbml.ext.spatial.CSGObject> listOfcsgObjs = csGeometry.getListOfCSGObjects();
            ArrayList<org.sbml.jsbml.ext.spatial.CSGObject> sbmlCSGs = new ArrayList<org.sbml.jsbml.ext.spatial.CSGObject>(listOfcsgObjs);
            // we want the CSGObj with highest ordinal to be the first
            // element in the CSG subvols array.
            Collections.sort(sbmlCSGs, new Comparator<org.sbml.jsbml.ext.spatial.CSGObject>() {

                @Override
                public int compare(org.sbml.jsbml.ext.spatial.CSGObject lhs, org.sbml.jsbml.ext.spatial.CSGObject rhs) {
                    // minus one to reverse sort
                    return -1 * Integer.compare(lhs.getOrdinal(), rhs.getOrdinal());
                }
            });
            int n = sbmlCSGs.size();
            CSGObject[] vcCSGSubVolumes = new CSGObject[n];
            for (int i = 0; i < n; i++) {
                org.sbml.jsbml.ext.spatial.CSGObject sbmlCSGObject = sbmlCSGs.get(i);
                CSGObject vcellCSGObject = new CSGObject(null, sbmlCSGObject.getDomainType(), i);
                vcellCSGObject.setRoot(getVCellCSGNode(sbmlCSGObject.getCSGNode()));
            }
            vcGeometry.getGeometrySpec().setSubVolumes(vcCSGSubVolumes);
        }
        // Call geom.geomSurfDesc.updateAll() to automatically generate
        // surface classes.
        // vcGsd.updateAll();
        vcGeometry.precomputeAll(new GeometryThumbnailImageFactoryAWT(), true, true);
    } catch (Exception e) {
        e.printStackTrace(System.out);
        throw new SBMLImportException("Unable to create VC subVolumes from SBML domainTypes : " + e.getMessage(), e);
    }
    // should now map each SBML domain to right VC geometric region.
    GeometricRegion[] vcGeomRegions = vcGsd.getGeometricRegions();
    ISize sampleSize = vcGsd.getVolumeSampleSize();
    RegionInfo[] regionInfos = vcGsd.getRegionImage().getRegionInfos();
    int numX = sampleSize.getX();
    int numY = sampleSize.getY();
    int numZ = sampleSize.getZ();
    double ox = vcOrigin.getX();
    double oy = vcOrigin.getY();
    double oz = vcOrigin.getZ();
    for (Domain domain : listOfDomains) {
        String domainType = domain.getDomainType();
        InteriorPoint interiorPt = domain.getListOfInteriorPoints().get(0);
        if (interiorPt == null) {
            DomainType currDomainType = null;
            for (DomainType dt : sbmlGeometry.getListOfDomainTypes()) {
                if (dt.getSpatialId().equals(domainType)) {
                    currDomainType = dt;
                }
            }
            if (currDomainType.getSpatialDimensions() == 2) {
                continue;
            }
        }
        Coordinate sbmlInteriorPtCoord = new Coordinate(interiorPt.getCoord1(), interiorPt.getCoord2(), interiorPt.getCoord3());
        for (int j = 0; j < vcGeomRegions.length; j++) {
            if (vcGeomRegions[j] instanceof VolumeGeometricRegion) {
                int regionID = ((VolumeGeometricRegion) vcGeomRegions[j]).getRegionID();
                for (int k = 0; k < regionInfos.length; k++) {
                    // (using gemoRegion regionID).
                    if (regionInfos[k].getRegionIndex() == regionID) {
                        int volIndx = 0;
                        Coordinate nearestPtCoord = null;
                        double minDistance = Double.MAX_VALUE;
                        // represented by SBML 'domain[i]'.
                        for (int z = 0; z < numZ; z++) {
                            for (int y = 0; y < numY; y++) {
                                for (int x = 0; x < numX; x++) {
                                    if (regionInfos[k].isIndexInRegion(volIndx)) {
                                        double unit_z = (numZ > 1) ? ((double) z) / (numZ - 1) : 0.5;
                                        double coordZ = oz + vcExtent.getZ() * unit_z;
                                        double unit_y = (numY > 1) ? ((double) y) / (numY - 1) : 0.5;
                                        double coordY = oy + vcExtent.getY() * unit_y;
                                        double unit_x = (numX > 1) ? ((double) x) / (numX - 1) : 0.5;
                                        double coordX = ox + vcExtent.getX() * unit_x;
                                        // for now, find the shortest dist
                                        // coord. Can refine algo later.
                                        Coordinate vcCoord = new Coordinate(coordX, coordY, coordZ);
                                        double distance = sbmlInteriorPtCoord.distanceTo(vcCoord);
                                        if (distance < minDistance) {
                                            minDistance = distance;
                                            nearestPtCoord = vcCoord;
                                        }
                                    }
                                    volIndx++;
                                }
                            // end - for x
                            }
                        // end - for y
                        }
                        // with domain name
                        if (nearestPtCoord != null) {
                            GeometryClass geomClassSBML = vcGeometry.getGeometryClass(domainType);
                            // we know vcGeometryReg[j] is a VolGeomRegion
                            GeometryClass geomClassVC = ((VolumeGeometricRegion) vcGeomRegions[j]).getSubVolume();
                            if (geomClassSBML.compareEqual(geomClassVC)) {
                                vcGeomRegions[j].setName(domain.getId());
                            }
                        }
                    }
                // end if (regInfoIndx = regId)
                }
            // end - for regInfo
            }
        }
    // end for - vcGeomRegions
    }
    // deal with surfaceClass:spDim2-domainTypes
    for (int i = 0; i < surfaceClassDomainTypesVector.size(); i++) {
        DomainType surfaceClassDomainType = surfaceClassDomainTypesVector.elementAt(i);
        // 'surfaceClassDomainType'
        for (Domain d : listOfDomains) {
            if (d.getDomainType().equals(surfaceClassDomainType.getId())) {
                // get the adjacent domains of this 'surface' domain
                // (surface domain + its 2 adj vol domains)
                Set<Domain> adjacentDomainsSet = getAssociatedAdjacentDomains(sbmlGeometry, d);
                // get the domain types of the adjacent domains in SBML and
                // store the corresponding subVol counterparts from VC for
                // adj vol domains
                Vector<SubVolume> adjacentSubVolumesVector = new Vector<SubVolume>();
                Vector<VolumeGeometricRegion> adjVolGeomRegionsVector = new Vector<VolumeGeometricRegion>();
                Iterator<Domain> iterator = adjacentDomainsSet.iterator();
                while (iterator.hasNext()) {
                    Domain dom = iterator.next();
                    DomainType dt = getBySpatialID(sbmlGeometry.getListOfDomainTypes(), dom.getDomainType());
                    if (dt.getSpatialDimensions() == 3) {
                        // for domain type with sp. dim = 3, get
                        // correspoinding subVol from VC geometry.
                        GeometryClass gc = vcGeometry.getGeometryClass(dt.getId());
                        adjacentSubVolumesVector.add((SubVolume) gc);
                        // store volGeomRegions corresponding to this (vol)
                        // geomClass in adjVolGeomRegionsVector : this
                        // should return ONLY 1 region for subVol.
                        GeometricRegion[] geomRegion = vcGsd.getGeometricRegions(gc);
                        adjVolGeomRegionsVector.add((VolumeGeometricRegion) geomRegion[0]);
                    }
                }
                // there should be only 2 subVols in this vector
                if (adjacentSubVolumesVector.size() != 2) {
                    throw new RuntimeException("Cannot have more or less than 2 subvolumes that are adjacent to surface (membrane) '" + d.getId() + "'");
                }
                // get the surface class with these 2 adj subVols. Set its
                // name to that of 'surfaceClassDomainType'
                SurfaceClass surfacClass = vcGsd.getSurfaceClass(adjacentSubVolumesVector.get(0), adjacentSubVolumesVector.get(1));
                surfacClass.setName(surfaceClassDomainType.getSpatialId());
                // get surfaceGeometricRegion that has adjVolGeomRegions as
                // its adjacent vol geom regions and set its name from
                // domain 'd'
                SurfaceGeometricRegion surfaceGeomRegion = getAssociatedSurfaceGeometricRegion(vcGsd, adjVolGeomRegionsVector);
                if (surfaceGeomRegion != null) {
                    surfaceGeomRegion.setName(d.getId());
                }
            }
        // end if - domain.domainType == surfaceClassDomainType
        }
    // end for - numDomains
    }
    // structureMappings in VC from compartmentMappings in SBML
    try {
        // set geometry first and then set structureMappings?
        vcBioModel.getSimulationContext(0).setGeometry(vcGeometry);
        // update simContextName ...
        vcBioModel.getSimulationContext(0).setName(vcBioModel.getSimulationContext(0).getName() + "_" + vcGeometry.getName());
        Model vcModel = vcBioModel.getSimulationContext(0).getModel();
        ModelUnitSystem vcModelUnitSystem = vcModel.getUnitSystem();
        Vector<StructureMapping> structMappingsVector = new Vector<StructureMapping>();
        SpatialCompartmentPlugin cplugin = null;
        for (int i = 0; i < sbmlModel.getNumCompartments(); i++) {
            Compartment c = sbmlModel.getCompartment(i);
            String cname = c.getName();
            cplugin = (SpatialCompartmentPlugin) c.getPlugin(SBMLUtils.SBML_SPATIAL_NS_PREFIX);
            CompartmentMapping compMapping = cplugin.getCompartmentMapping();
            if (compMapping != null) {
                // final String id = compMapping.getId();
                // final String name = compMapping.getName();
                CastInfo<Structure> ci = SBMLHelper.getTypedStructure(Structure.class, vcModel, cname);
                if (ci.isGood()) {
                    Structure struct = ci.get();
                    String domainType = compMapping.getDomainType();
                    GeometryClass geometryClass = vcGeometry.getGeometryClass(domainType);
                    double unitSize = compMapping.getUnitSize();
                    Feature feat = BeanUtils.downcast(Feature.class, struct);
                    if (feat != null) {
                        FeatureMapping featureMapping = new FeatureMapping(feat, vcBioModel.getSimulationContext(0), vcModelUnitSystem);
                        featureMapping.setGeometryClass(geometryClass);
                        if (geometryClass instanceof SubVolume) {
                            featureMapping.getVolumePerUnitVolumeParameter().setExpression(new Expression(unitSize));
                        } else if (geometryClass instanceof SurfaceClass) {
                            featureMapping.getVolumePerUnitAreaParameter().setExpression(new Expression(unitSize));
                        }
                        structMappingsVector.add(featureMapping);
                    } else if (struct instanceof Membrane) {
                        MembraneMapping membraneMapping = new MembraneMapping((Membrane) struct, vcBioModel.getSimulationContext(0), vcModelUnitSystem);
                        membraneMapping.setGeometryClass(geometryClass);
                        if (geometryClass instanceof SubVolume) {
                            membraneMapping.getAreaPerUnitVolumeParameter().setExpression(new Expression(unitSize));
                        } else if (geometryClass instanceof SurfaceClass) {
                            membraneMapping.getAreaPerUnitAreaParameter().setExpression(new Expression(unitSize));
                        }
                        structMappingsVector.add(membraneMapping);
                    }
                }
            }
        }
        StructureMapping[] structMappings = structMappingsVector.toArray(new StructureMapping[0]);
        vcBioModel.getSimulationContext(0).getGeometryContext().setStructureMappings(structMappings);
        // if type from SBML parameter Boundary Condn is not the same as the
        // boundary type of the
        // structureMapping of structure of paramSpContext, set the boundary
        // condn type of the structureMapping
        // to the value of 'type' from SBML parameter Boundary Condn.
        ListOf<Parameter> listOfGlobalParams = sbmlModel.getListOfParameters();
        for (Parameter sbmlGlobalParam : sbmlModel.getListOfParameters()) {
            SpatialParameterPlugin spplugin = (SpatialParameterPlugin) sbmlGlobalParam.getPlugin(SBMLUtils.SBML_SPATIAL_NS_PREFIX);
            ParameterType paramType = spplugin.getParamType();
            if (!(paramType instanceof BoundaryCondition)) {
                continue;
            }
            BoundaryCondition bCondn = (BoundaryCondition) paramType;
            if (bCondn.isSetVariable()) {
                // get the var of boundaryCondn; find appropriate spContext
                // in vcell;
                SpeciesContext paramSpContext = vcBioModel.getSimulationContext(0).getModel().getSpeciesContext(bCondn.getVariable());
                if (paramSpContext != null) {
                    Structure s = paramSpContext.getStructure();
                    StructureMapping sm = vcBioModel.getSimulationContext(0).getGeometryContext().getStructureMapping(s);
                    if (sm != null) {
                        BoundaryConditionType bct = null;
                        switch(bCondn.getType()) {
                            case Dirichlet:
                                {
                                    bct = BoundaryConditionType.DIRICHLET;
                                    break;
                                }
                            case Neumann:
                                {
                                    bct = BoundaryConditionType.NEUMANN;
                                    break;
                                }
                            case Robin_inwardNormalGradientCoefficient:
                            case Robin_sum:
                            case Robin_valueCoefficient:
                            default:
                                throw new RuntimeException("boundary condition type " + bCondn.getType().name() + " not supported");
                        }
                        for (CoordinateComponent coordComp : getSbmlGeometry().getListOfCoordinateComponents()) {
                            if (bCondn.getSpatialRef().equals(coordComp.getBoundaryMinimum().getSpatialId())) {
                                switch(coordComp.getType()) {
                                    case cartesianX:
                                        {
                                            sm.setBoundaryConditionTypeXm(bct);
                                        }
                                    case cartesianY:
                                        {
                                            sm.setBoundaryConditionTypeYm(bct);
                                        }
                                    case cartesianZ:
                                        {
                                            sm.setBoundaryConditionTypeZm(bct);
                                        }
                                }
                            }
                            if (bCondn.getSpatialRef().equals(coordComp.getBoundaryMaximum().getSpatialId())) {
                                switch(coordComp.getType()) {
                                    case cartesianX:
                                        {
                                            sm.setBoundaryConditionTypeXm(bct);
                                        }
                                    case cartesianY:
                                        {
                                            sm.setBoundaryConditionTypeYm(bct);
                                        }
                                    case cartesianZ:
                                        {
                                            sm.setBoundaryConditionTypeZm(bct);
                                        }
                                }
                            }
                        }
                    } else // sm != null
                    {
                        logger.sendMessage(VCLogger.Priority.MediumPriority, VCLogger.ErrorType.OverallWarning, "No structure " + s.getName() + " requested by species context " + paramSpContext.getName());
                    }
                }
            // end if (paramSpContext != null)
            }
        // end if (bCondn.isSetVar())
        }
        // end for (sbmlModel.numParams)
        vcBioModel.getSimulationContext(0).getGeometryContext().refreshStructureMappings();
        vcBioModel.getSimulationContext(0).refreshSpatialObjects();
    } catch (Exception e) {
        e.printStackTrace(System.out);
        throw new SBMLImportException("Unable to create VC structureMappings from SBML compartment mappings : " + e.getMessage(), e);
    }
}

Example 3 with VCImage

use of cbit.image.VCImage in project vcell by virtualcell.

the class ClientRequestManager method createVCImageFromUnsignedShorts.

public static VCImage createVCImageFromUnsignedShorts(short[] dataToSegment, Extent extent, ISize isize, BitSet uniquePixelBS) throws Exception {
    // auto segment
    int minVal = dataToSegment[0] & 0x0000FFFF;
    int maxVal = minVal;
    for (int i = 0; i < dataToSegment.length; i++) {
        int usIntVal = (int) (dataToSegment[i] & 0x0000FFFF);
        minVal = Math.min(usIntVal, minVal);
        maxVal = Math.max(usIntVal, maxVal);
    }
    byte[] byteData = new byte[dataToSegment.length];
    if (maxVal >= MAX_NUMBER_OF_COLORS_IMPORTED_FILE) {
        if (uniquePixelBS.cardinality() <= MAX_NUMBER_OF_COLORS_IMPORTED_FILE) {
            int index = 0;
            int[] indexRef = new int[(int) Math.pow(2, Short.SIZE)];
            Arrays.fill(indexRef, -1);
            for (int i = 0; i < indexRef.length; i++) {
                if (uniquePixelBS.get(i)) {
                    indexRef[i] = index;
                    index++;
                }
            }
            for (int i = 0; i < dataToSegment.length; i++) {
                byteData[i] = (byte) indexRef[(int) (dataToSegment[i] & 0x0000FFFF)];
            }
        } else {
            for (int i = 0; i < dataToSegment.length; i++) {
                byteData[i] = (byte) (0xFF & (int) ((double) (dataToSegment[i] - minVal) / (double) (maxVal - minVal) * (MAX_NUMBER_OF_COLORS_IMPORTED_FILE - 1)));
            }
        }
    } else {
        for (int i = 0; i < byteData.length; i++) {
            byteData[i] = (byte) (dataToSegment[i] & 0xFF);
        }
    }
    VCImage autoSegmentVCImage = new VCImageUncompressed(null, byteData, extent, isize.getX(), isize.getY(), isize.getZ());
    return autoSegmentVCImage;
}

Example 4 with VCImage

use of cbit.image.VCImage in project vcell by virtualcell.

the class MathModel_SBMLExporter method addGeometry.

private static void addGeometry(Model sbmlModel, MathModel vcMathModel) {
    SpatialModelPlugin mplugin = (SpatialModelPlugin) sbmlModel.getPlugin(SBMLUtils.SBML_SPATIAL_NS_PREFIX);
    // Creates a geometry object via SpatialModelPlugin object.
    org.sbml.jsbml.ext.spatial.Geometry sbmlGeometry = mplugin.getGeometry();
    sbmlGeometry.setCoordinateSystem(GeometryKind.cartesian);
    Geometry vcGeometry = vcMathModel.getGeometry();
    // 
    // list of CoordinateComponents : 1 if geometry is 1-d, 2 if geometry is 2-d, 3 if geometry is 3-d
    // 
    int dimension = vcGeometry.getDimension();
    Extent vcExtent = vcGeometry.getExtent();
    Origin vcOrigin = vcGeometry.getOrigin();
    // add x coordinate component
    CoordinateComponent coordCompX = sbmlGeometry.createCoordinateComponent();
    coordCompX.setSpatialId("CoordCompX");
    coordCompX.setType(CoordinateKind.cartesianX);
    Boundary minX = coordCompX.getBoundaryMaximum();
    minX.setSpatialId("Xmin");
    minX.setValue(vcOrigin.getX());
    Boundary maxX = coordCompX.getBoundaryMaximum();
    maxX.setSpatialId("Xmax");
    maxX.setValue(vcOrigin.getX() + (vcExtent.getX()));
    Parameter parameterX = sbmlModel.createParameter();
    // note for exporting BioModels rather than MathModels, get ReservedSymbol from Model with Role of ReservedSymbolRole.X
    parameterX.setId(ReservedVariable.X.getName());
    SpatialSymbolReference coordXSpatialRef = new SpatialSymbolReference();
    coordXSpatialRef.setSpatialRef(coordCompX.getSpatialId());
    SpatialParameterPlugin parameterXSpatialPlugin = (SpatialParameterPlugin) parameterX.getPlugin(SBMLUtils.SBML_SPATIAL_NS_PREFIX);
    parameterXSpatialPlugin.setParamType(coordXSpatialRef);
    // add y coordinate component
    if (dimension == 2 || dimension == 3) {
        CoordinateComponent coordCompY = sbmlGeometry.createCoordinateComponent();
        coordCompY.setSpatialId("CoordCompY");
        coordCompY.setType(CoordinateKind.cartesianY);
        Boundary minY = coordCompY.getBoundaryMinimum();
        minY.setId("Ymin");
        minY.setValue(vcOrigin.getY());
        Boundary maxY = coordCompY.getBoundaryMaximum();
        maxY.setId("Ymax");
        maxY.setValue(vcOrigin.getY() + (vcExtent.getY()));
        Parameter parameterY = sbmlModel.createParameter();
        // note for exporting BioModels rather than MathModels, get ReservedSymbol from Model with Role of ReservedSymbolRole.Y
        parameterY.setId(ReservedVariable.Y.getName());
        SpatialSymbolReference coordYSpatialRef = new SpatialSymbolReference();
        coordYSpatialRef.setSpatialRef(coordCompY.getSpatialId());
        SpatialParameterPlugin parameterYSpatialPlugin = (SpatialParameterPlugin) parameterY.getPlugin(SBMLUtils.SBML_SPATIAL_NS_PREFIX);
        parameterYSpatialPlugin.setParamType(coordYSpatialRef);
    }
    // add z coordinate component
    if (dimension == 3) {
        CoordinateComponent coordCompZ = sbmlGeometry.createCoordinateComponent();
        coordCompZ.setSpatialId("CoordCompZ");
        coordCompZ.setType(CoordinateKind.cartesianZ);
        Boundary minZ = coordCompZ.getBoundaryMinimum();
        minZ.setId("Zmin");
        minZ.setValue(vcOrigin.getZ());
        Boundary maxZ = coordCompZ.getBoundaryMaximum();
        maxZ.setId("Zmax");
        maxZ.setValue(vcOrigin.getZ() + (vcExtent.getZ()));
        Parameter parameterZ = sbmlModel.createParameter();
        // note for exporting BioModels rather than MathModels, get ReservedSymbol from Model with Role of ReservedSymbolRole.Y
        parameterZ.setId(ReservedVariable.Z.getName());
        SpatialSymbolReference coordZSpatialRef = new SpatialSymbolReference();
        coordZSpatialRef.setSpatialRef(coordCompZ.getSpatialId());
        SpatialParameterPlugin parameterZSpatialPlugin = (SpatialParameterPlugin) parameterZ.getPlugin(SBMLUtils.SBML_SPATIAL_NS_PREFIX);
        parameterZSpatialPlugin.setParamType(coordZSpatialRef);
    }
    // 
    // list of domain types : subvolumes and surface classes from VC
    // Also create compartments - one compartment for each geometryClass. set id and spatialDimension based on type of geometryClass.
    // 
    boolean bAnalyticGeom = false;
    boolean bImageGeom = false;
    GeometryClass[] vcGeomClasses = vcGeometry.getGeometryClasses();
    int numVCGeomClasses = vcGeomClasses.length;
    for (int i = 0; i < numVCGeomClasses; i++) {
        DomainType domainType = sbmlGeometry.createDomainType();
        domainType.setId(vcGeomClasses[i].getName());
        if (vcGeomClasses[i] instanceof SubVolume) {
            if (((SubVolume) vcGeomClasses[i]) instanceof AnalyticSubVolume) {
                bAnalyticGeom = true;
            } else if (((SubVolume) vcGeomClasses[i]) instanceof ImageSubVolume) {
                bImageGeom = true;
            }
            domainType.setSpatialDimensions(3);
        } else if (vcGeomClasses[i] instanceof SurfaceClass) {
            domainType.setSpatialDimensions(2);
        }
    }
    // 
    // list of domains, adjacent domains : from VC geometricRegions
    // 
    GeometrySurfaceDescription vcGSD = vcGeometry.getGeometrySurfaceDescription();
    if (vcGSD.getRegionImage() == null) {
        try {
            vcGSD.updateAll();
        } catch (Exception e) {
            e.printStackTrace(System.out);
            throw new RuntimeException("Unable to generate region images for geometry");
        }
    }
    GeometricRegion[] vcGeometricRegions = vcGSD.getGeometricRegions();
    ISize sampleSize = vcGSD.getVolumeSampleSize();
    int numX = sampleSize.getX();
    int numY = sampleSize.getY();
    int numZ = sampleSize.getZ();
    double ox = vcOrigin.getX();
    double oy = vcOrigin.getY();
    double oz = vcOrigin.getZ();
    RegionInfo[] regionInfos = vcGSD.getRegionImage().getRegionInfos();
    Compartment compartment = null;
    for (int i = 0; i < vcGeometricRegions.length; i++) {
        // domains
        Domain domain = sbmlGeometry.createDomain();
        domain.setId(vcGeometricRegions[i].getName());
        compartment = sbmlModel.createCompartment();
        compartment.setId("compartment" + i);
        if (vcGeometricRegions[i] instanceof VolumeGeometricRegion) {
            domain.setDomainType(((VolumeGeometricRegion) vcGeometricRegions[i]).getSubVolume().getName());
            // domain.setImplicit(false);
            compartment.setSpatialDimensions(3);
            InteriorPoint interiorPt = domain.createInteriorPoint();
            int regionID = ((VolumeGeometricRegion) vcGeometricRegions[i]).getRegionID();
            boolean bFound = false;
            int regInfoIndx = 0;
            for (int j = 0; j < regionInfos.length; j++) {
                regInfoIndx = j;
                if (regionInfos[j].getRegionIndex() == regionID) {
                    int volIndx = 0;
                    for (int z = 0; z < numZ && !bFound; z++) {
                        for (int y = 0; y < numY && !bFound; y++) {
                            for (int x = 0; x < numX && !bFound; x++) {
                                if (regionInfos[j].isIndexInRegion(volIndx)) {
                                    bFound = true;
                                    double unit_z = (numZ > 1) ? ((double) z) / (numZ - 1) : 0.5;
                                    double coordZ = oz + vcExtent.getZ() * unit_z;
                                    double unit_y = (numY > 1) ? ((double) y) / (numY - 1) : 0.5;
                                    double coordY = oy + vcExtent.getY() * unit_y;
                                    double unit_x = (numX > 1) ? ((double) x) / (numX - 1) : 0.5;
                                    double coordX = ox + vcExtent.getX() * unit_x;
                                    interiorPt.setCoord1(coordX);
                                    interiorPt.setCoord2(coordY);
                                    interiorPt.setCoord3(coordZ);
                                }
                                volIndx++;
                            }
                        // end - for x
                        }
                    // end - for y
                    }
                // end - for z
                }
            // end if
            }
            // end for regionInfos
            if (!bFound) {
                throw new RuntimeException("Unable to find interior point for region '" + regionInfos[regInfoIndx].toString());
            }
        } else if (vcGeometricRegions[i] instanceof SurfaceGeometricRegion) {
            SurfaceGeometricRegion vcSurfaceGeomReg = (SurfaceGeometricRegion) vcGeometricRegions[i];
            GeometricRegion geomRegion0 = vcSurfaceGeomReg.getAdjacentGeometricRegions()[0];
            GeometricRegion geomRegion1 = vcSurfaceGeomReg.getAdjacentGeometricRegions()[1];
            SurfaceClass surfaceClass = vcGSD.getSurfaceClass(((VolumeGeometricRegion) geomRegion0).getSubVolume(), ((VolumeGeometricRegion) geomRegion1).getSubVolume());
            domain.setDomainType(surfaceClass.getName());
            // domain.setImplicit(true);
            compartment.setSpatialDimensions(2);
            // adjacent domains : 2 adjacent domain objects for each surfaceClass in VC.
            // adjacent domain 1
            AdjacentDomains adjDomain = sbmlGeometry.createAdjacentDomain();
            adjDomain.setId(TokenMangler.mangleToSName(vcSurfaceGeomReg.getName() + "_" + geomRegion0.getName()));
            adjDomain.setDomain1(vcSurfaceGeomReg.getName());
            adjDomain.setDomain2(geomRegion0.getName());
            // adjacent domain 2
            adjDomain = sbmlGeometry.createAdjacentDomain();
            adjDomain.setId(TokenMangler.mangleToSName(vcSurfaceGeomReg.getName() + "_" + geomRegion1.getName()));
            adjDomain.setDomain1(vcSurfaceGeomReg.getName());
            adjDomain.setDomain2(geomRegion1.getName());
        }
        // 
        // Mathmodel does not have structureMapping, hence creating compartmentMapping while creating domains.
        // @TODO : how to assign unitSize for compartmentMapping?
        // 
        SpatialCompartmentPlugin cplugin = (SpatialCompartmentPlugin) compartment.getPlugin(SBMLUtils.SBML_SPATIAL_NS_PREFIX);
        CompartmentMapping compMapping = cplugin.getCompartmentMapping();
        String compMappingId = TokenMangler.mangleToSName(domain.getDomainType() + "_" + compartment.getId());
        compMapping.setId(compMappingId);
        compMapping.setDomainType(TokenMangler.mangleToSName(domain.getDomainType()));
    // try {
    // compMapping.setUnitSize(1.0);
    // } catch (ExpressionException e) {
    // e.printStackTrace(System.out);
    // throw new RuntimeException("Unable to create compartment mapping for structureMapping '" + compMapping.getId() +"' : " + e.getMessage());
    // }
    }
    AnalyticGeometry sbmlAnalyticGeom = null;
    SampledFieldGeometry sbmlSFGeom = null;
    // both image and analytic subvolumes?? == not handled in SBML at this time.
    if (bAnalyticGeom && !bImageGeom) {
        sbmlAnalyticGeom = sbmlGeometry.createAnalyticGeometry();
        sbmlAnalyticGeom.setId(TokenMangler.mangleToSName(vcGeometry.getName()));
    } else if (bImageGeom && !bAnalyticGeom) {
        // assuming image based geometry if not analytic geometry
        sbmlSFGeom = sbmlGeometry.createSampledFieldGeometry();
        sbmlSFGeom.setId(TokenMangler.mangleToSName(vcGeometry.getName()));
    } else if (bAnalyticGeom && bImageGeom) {
        throw new RuntimeException("Export to SBML of a combination of Image-based and Analytic geometries is not supported yet.");
    } else if (!bAnalyticGeom && !bImageGeom) {
        throw new RuntimeException("Unknown geometry type.");
    }
    // 
    for (int i = 0; i < vcGeomClasses.length; i++) {
        if (vcGeomClasses[i] instanceof AnalyticSubVolume) {
            // add analytiVols to sbmlAnalyticGeometry
            if (sbmlAnalyticGeom != null) {
                AnalyticVolume analyticVol = sbmlAnalyticGeom.createAnalyticVolume();
                analyticVol.setId(vcGeomClasses[i].getName());
                analyticVol.setDomainType(vcGeomClasses[i].getName());
                analyticVol.setFunctionType(FunctionKind.layered);
                analyticVol.setOrdinal(i);
                Expression expr = ((AnalyticSubVolume) vcGeomClasses[i]).getExpression();
                try {
                    String mathMLStr = ExpressionMathMLPrinter.getMathML(expr, true);
                    ASTNode mathMLNode = ASTNode.readMathMLFromString(mathMLStr);
                    analyticVol.setMath(mathMLNode);
                } catch (Exception e) {
                    e.printStackTrace(System.out);
                    throw new RuntimeException("Error converting VC subvolume expression to mathML" + e.getMessage());
                }
            } else {
                throw new RuntimeException("SBML AnalyticGeometry is null.");
            }
        } else if (vcGeomClasses[i] instanceof ImageSubVolume) {
            // add sampledVols to sbmlSFGeometry
            if (sbmlSFGeom != null) {
                SampledVolume sampledVol = sbmlSFGeom.createSampledVolume();
                sampledVol.setId(vcGeomClasses[i].getName());
                sampledVol.setDomainType(vcGeomClasses[i].getName());
                sampledVol.setSampledValue(((ImageSubVolume) vcGeomClasses[i]).getPixelValue());
            } else {
                throw new RuntimeException("SBML SampledFieldGeometry is null.");
            }
        }
    }
    if (sbmlSFGeom != null) {
        // add sampledField to sampledFieldGeometry
        SampledField sampledField = sbmlGeometry.createSampledField();
        VCImage vcImage = vcGeometry.getGeometrySpec().getImage();
        sampledField.setId(vcImage.getName());
        sampledField.setNumSamples1(vcImage.getNumX());
        if (vcImage.getNumY() > 1) {
            sampledField.setNumSamples2(vcImage.getNumY());
        }
        if (vcImage.getNumZ() > 1) {
            sampledField.setNumSamples3(vcImage.getNumZ());
        }
        sampledField.setInterpolationType(InterpolationKind.nearestneighbor);
        sampledField.setDataType(DataKind.UINT8);
        // add image from vcGeometrySpec to sampledField.
        try {
            StringBuffer sb = new StringBuffer();
            byte[] imagePixelsBytes = vcImage.getPixelsCompressed();
            for (int i = 0; i < imagePixelsBytes.length; i++) {
                int uint8_sample = ((int) imagePixelsBytes[i]) & 0xff;
                sb.append(uint8_sample + " ");
            }
            sampledField.setSamplesLength(vcImage.getNumXYZ());
            sampledField.setSamples(sb.toString().trim());
        } catch (ImageException e) {
            e.printStackTrace(System.out);
            throw new RuntimeException("Unable to export image from VCell to SBML : " + e.getMessage());
        }
    }
}

Example 5 with VCImage

use of cbit.image.VCImage in project vcell by virtualcell.

the class XmlReader method getGeometry.

/**
 * This method returns a Geometry object from a XML representation.
 * Creation date: (4/26/2001 12:12:18 PM)
 * @return cbit.vcell.geometry.Geometry
 * @param param org.jdom.Element
 * @exception cbit.vcell.xml.XmlParseException The exception description.
 */
public Geometry getGeometry(Element param) throws XmlParseException {
    // Get the Extent object
    Extent newextent = getExtent(param.getChild(XMLTags.ExtentTag, vcNamespace));
    // Get VCimage information
    VCImage newimage = null;
    if (param.getChild(XMLTags.ImageTag, vcNamespace) != null) {
        try {
            newimage = getVCImage(param.getChild(XMLTags.ImageTag, vcNamespace), newextent);
        } catch (Throwable e) {
            e.printStackTrace();
            throw new XmlParseException(e);
        }
    }
    // Get attributes
    String name = unMangle(param.getAttributeValue(XMLTags.NameAttrTag));
    int newdimension = Integer.parseInt(param.getAttributeValue(XMLTags.DimensionAttrTag));
    // Get Version
    Version version = getVersion(param.getChild(XMLTags.VersionTag, vcNamespace));
    // Try to construct the geometry upon four different cases
    Geometry newgeometry = null;
    if (version != null && newimage != null) {
        newgeometry = new Geometry(version, newimage);
    } else if (version != null) {
        newgeometry = new Geometry(version, newdimension);
    } else if (newimage != null) {
        newgeometry = new Geometry(name, newimage);
    } else {
        newgeometry = new Geometry(name, newdimension);
    }
    // set attributes
    try {
        if (!newgeometry.getName().equalsIgnoreCase(name)) {
            newgeometry.setName(name);
        }
        // String annotation = param.getAttributeValue(XMLTags.AnnotationAttrTag);
        // if (annotation!=null) {
        // newgeometry.setDescription( unMangle(annotation) );
        // }
        // Add annotation
        String annotation = param.getChildText(XMLTags.AnnotationTag, vcNamespace);
        if (annotation != null && annotation.length() > 0) {
            newgeometry.setDescription(unMangle(annotation));
        }
    } catch (java.beans.PropertyVetoException e) {
        e.printStackTrace();
        throw new XmlParseException("A PropertyVetoException occurred when setting the name " + name + " to a Geometry object!", e);
    }
    // Add the Extent
    try {
        newgeometry.getGeometrySpec().setExtent(newextent);
    } catch (java.beans.PropertyVetoException e) {
        e.printStackTrace();
        throw new XmlParseException("A PropertyVetoException occurred while trying to set the Extent for the Geometry " + name, e);
    }
    // Add the Origin
    newgeometry.getGeometrySpec().setOrigin(getOrigin(param.getChild(XMLTags.OriginTag, vcNamespace)));
    // Add the SubVolumes
    List<Element> children = param.getChildren(XMLTags.SubVolumeTag, vcNamespace);
    SubVolume[] newsubvolumes = new SubVolume[children.size()];
    int subvolumeCounter = 0;
    for (Element child : children) {
        newsubvolumes[subvolumeCounter] = getSubVolume(child);
        subvolumeCounter++;
    }
    try {
        newgeometry.getGeometrySpec().setSubVolumes(newsubvolumes);
    } catch (java.beans.PropertyVetoException e) {
        e.printStackTrace();
        throw new XmlParseException("A PropertyVetoException was generated when ading the subvolumes to the Geometry " + name, e);
    }
    if (newgeometry.getDimension() > 0) {
        // Add SurfaceClasses
        List<Element> surfaceClassChildren = param.getChildren(XMLTags.SurfaceClassTag, vcNamespace);
        SurfaceClass[] newSurfaceClassArr = new SurfaceClass[surfaceClassChildren.size()];
        int surfClassCounter = 0;
        for (Element surfClassChild : surfaceClassChildren) {
            newSurfaceClassArr[surfClassCounter] = getSurfaceClass(surfClassChild, newgeometry);
            surfClassCounter++;
        }
        try {
            newgeometry.getGeometrySurfaceDescription().setSurfaceClasses(newSurfaceClassArr);
        } catch (java.beans.PropertyVetoException e) {
            e.printStackTrace();
            throw new XmlParseException("A PropertyVetoException was generated when ading the subvolumes to the Geometry " + name, e);
        }
    }
    // read Filaments (if any)
    Iterator<Element> iterator = param.getChildren(XMLTags.FilamentTag, vcNamespace).iterator();
    while (iterator.hasNext()) {
        Element tempElement = iterator.next();
        String filname = unMangle(tempElement.getAttributeValue(XMLTags.NameAttrTag));
        Iterator<Element> curveiterator = tempElement.getChildren().iterator();
        while (curveiterator.hasNext()) {
            ControlPointCurve curve = getControlPointCurve(curveiterator.next());
            newgeometry.getGeometrySpec().getFilamentGroup().addCurve(filname, curve);
        }
    }
    // read Surface description (if any)
    Element sd = param.getChild(XMLTags.SurfaceDescriptionTag, vcNamespace);
    if (sd != null) {
        GeometrySurfaceDescription dummy = getGeometrySurfaceDescription(sd, newgeometry);
    }
    try {
        newgeometry.precomputeAll(new GeometryThumbnailImageFactoryAWT(), false, false);
    } catch (GeometryException e) {
        e.printStackTrace(System.out);
    } catch (ImageException e) {
        e.printStackTrace(System.out);
    } catch (ExpressionException e) {
        e.printStackTrace(System.out);
    }
    return newgeometry;
}