Examples with Ebms3Error com.helger.phase4.ebms3header.Ebms3Error used on opensource projects

Example 11 with Ebms3Error

use of com.helger.phase4.ebms3header.Ebms3Error in project phase4 by phax.

the class AS4IncomingHandler method _parseMessage.

@Nullable
private static IAS4MessageState _parseMessage(@Nonnull final IAS4CryptoFactory aCryptoFactory, @Nonnull final IPModeResolver aPModeResolver, @Nonnull final IAS4IncomingAttachmentFactory aIAF, @Nonnull final IAS4IncomingProfileSelector aAS4ProfileSelector, @Nonnull @WillNotClose final AS4ResourceHelper aResHelper, @Nullable final IPMode aSendingPMode, @Nonnull final Locale aLocale, @Nonnull final IAS4IncomingMessageMetadata aMessageMetadata, @Nonnull final HttpResponse aHttpResponse, @Nonnull final byte[] aResponsePayload, @Nullable final IAS4IncomingDumper aIncomingDumper) throws Phase4Exception {
    // This wrapper will take the result
    final Wrapper<IAS4MessageState> aRetWrapper = new Wrapper<>();
    // Handler for the parsed message
    final IAS4ParsedMessageCallback aCallback = (aHttpHeaders, aSoapDocument, eSoapVersion, aIncomingAttachments) -> {
        final ICommonsList<Ebms3Error> aErrorMessages = new CommonsArrayList<>();
        // Use the sending PMode as fallback, because from the incoming
        // receipt/error it is impossible to detect a PMode
        final SOAPHeaderElementProcessorRegistry aRegistry = SOAPHeaderElementProcessorRegistry.createDefault(aPModeResolver, aCryptoFactory, aSendingPMode);
        // Parse AS4, verify signature etc
        final IAS4MessageState aState = processEbmsMessage(aResHelper, aLocale, aRegistry, aHttpHeaders, aSoapDocument, eSoapVersion, aIncomingAttachments, aAS4ProfileSelector, aErrorMessages);
        if (aState.isSoapHeaderElementProcessingSuccessful()) {
            // Remember the parsed signal message
            aRetWrapper.set(aState);
        } else {
            throw new Phase4Exception("Error processing AS4 message", aState.getSoapWSS4JException());
        }
    };
    // Create header map from response headers
    final HttpHeaderMap aHttpHeaders = new HttpHeaderMap();
    for (final Header aHeader : aHttpResponse.getAllHeaders()) aHttpHeaders.addHeader(aHeader.getName(), aHeader.getValue());
    try (final NonBlockingByteArrayInputStream aPayloadIS = new NonBlockingByteArrayInputStream(aResponsePayload)) {
        // Parse incoming message
        parseAS4Message(aIAF, aResHelper, aMessageMetadata, aPayloadIS, aHttpHeaders, aCallback, aIncomingDumper);
    } catch (final Phase4Exception ex) {
        throw ex;
    } catch (final Exception ex) {
        throw new Phase4Exception("Error parsing AS4 message", ex);
    }
    // This one contains the result
    return aRetWrapper.get();
}

Example 12 with Ebms3Error

use of com.helger.phase4.ebms3header.Ebms3Error in project phase4 by phax.

the class AS4IncomingHandler method processEbmsMessage.

@Nonnull
public static IAS4MessageState processEbmsMessage(@Nonnull @WillNotClose final AS4ResourceHelper aResHelper, @Nonnull final Locale aLocale, @Nonnull final SOAPHeaderElementProcessorRegistry aRegistry, @Nonnull final HttpHeaderMap aHttpHeaders, @Nonnull final Document aSoapDocument, @Nonnull final ESoapVersion eSoapVersion, @Nonnull final ICommonsList<WSS4JAttachment> aIncomingAttachments, @Nonnull final IAS4IncomingProfileSelector aAS4ProfileSelector, @Nonnull final ICommonsList<Ebms3Error> aErrorMessagesTarget) throws Phase4Exception {
    ValueEnforcer.notNull(aResHelper, "ResHelper");
    ValueEnforcer.notNull(aLocale, "Locale");
    ValueEnforcer.notNull(aHttpHeaders, "HttpHeaders");
    ValueEnforcer.notNull(aSoapDocument, "SoapDocument");
    ValueEnforcer.notNull(eSoapVersion, "SoapVersion");
    ValueEnforcer.notNull(aIncomingAttachments, "IncomingAttachments");
    ValueEnforcer.notNull(aAS4ProfileSelector, "AS4ProfileSelector");
    ValueEnforcer.notNull(aErrorMessagesTarget, "aErrorMessagesTarget");
    if (LOGGER.isDebugEnabled()) {
        LOGGER.debug("Received the following SOAP " + eSoapVersion.getVersion() + " document:");
        LOGGER.debug(AS4XMLHelper.serializeXML(aSoapDocument));
        if (aIncomingAttachments.isEmpty()) {
            LOGGER.debug("Without any incoming attachments");
        } else {
            LOGGER.debug("Including the following " + aIncomingAttachments.size() + " attachments:");
            LOGGER.debug(aIncomingAttachments.toString());
        }
    }
    // This is where all data from the SOAP headers is stored to
    final AS4MessageState aState = new AS4MessageState(eSoapVersion, aResHelper, aLocale);
    // Handle all headers - modifies the state
    _processSoapHeaderElements(aRegistry, aSoapDocument, aIncomingAttachments, aState, aErrorMessagesTarget);
    // Remember if header processing was successful or not
    final boolean bSoapHeaderElementProcessingSuccess = aErrorMessagesTarget.isEmpty();
    aState.setSoapHeaderElementProcessingSuccessful(bSoapHeaderElementProcessingSuccess);
    if (bSoapHeaderElementProcessingSuccess) {
        // Every message can only contain 1 User message or 1 pull message
        // aUserMessage can be null on incoming Pull-Message!
        final Ebms3UserMessage aEbmsUserMessage = aState.getEbmsUserMessage();
        final Ebms3Error aEbmsError = aState.getEbmsError();
        final Ebms3PullRequest aEbmsPullRequest = aState.getEbmsPullRequest();
        final Ebms3Receipt aEbmsReceipt = aState.getEbmsReceipt();
        // Check payload consistency
        final int nCountData = (aEbmsUserMessage != null ? 1 : 0) + (aEbmsPullRequest != null ? 1 : 0) + (aEbmsReceipt != null ? 1 : 0) + (aEbmsError != null ? 1 : 0);
        if (nCountData != 1) {
            LOGGER.error("Expected a UserMessage(" + (aEbmsUserMessage != null ? 1 : 0) + "), a PullRequest(" + (aEbmsPullRequest != null ? 1 : 0) + "), a Receipt(" + (aEbmsReceipt != null ? 1 : 0) + ") or an Error(" + (aEbmsError != null ? 1 : 0) + ")");
            // send EBMS:0001 error back
            aErrorMessagesTarget.add(EEbmsError.EBMS_VALUE_NOT_RECOGNIZED.getAsEbms3Error(aLocale, aState.getMessageID()));
        }
        // Determine AS4 profile ID (since 0.13.0)
        final String sProfileID = aAS4ProfileSelector.getAS4ProfileID(aState);
        if (LOGGER.isDebugEnabled())
            LOGGER.debug("Determined AS4 profile ID '" + sProfileID + "' for current message");
        aState.setProfileID(sProfileID);
        final IPMode aPMode = aState.getPMode();
        final PModeLeg aEffectiveLeg = aState.getEffectivePModeLeg();
        if (aEbmsUserMessage != null) {
            // User message requires PMode
            if (aPMode == null)
                throw new Phase4Exception("No AS4 P-Mode configuration found for user-message!");
            // Only check leg if the message is a usermessage
            if (aEffectiveLeg == null)
                throw new Phase4Exception("No AS4 P-Mode leg could be determined!");
            // Only do profile checks if a profile is set
            if (StringHelper.hasText(sProfileID)) {
                // Resolve profile ID
                final IAS4Profile aProfile = MetaAS4Manager.getProfileMgr().getProfileOfID(sProfileID);
                if (aProfile == null)
                    throw new IllegalStateException("The configured AS4 profile '" + sProfileID + "' does not exist.");
                // Profile Checks gets set when started with Server
                final IAS4ProfileValidator aValidator = aProfile.getValidator();
                if (aValidator != null) {
                    if (aAS4ProfileSelector.validateAgainstProfile()) {
                        final ErrorList aErrorList = new ErrorList();
                        aValidator.validatePMode(aPMode, aErrorList);
                        aValidator.validateUserMessage(aEbmsUserMessage, aErrorList);
                        if (aErrorList.isNotEmpty()) {
                            throw new Phase4Exception("Error validating incoming AS4 message with the profile " + aProfile.getDisplayName() + "\n Following errors are present: " + aErrorList.getAllErrors().getAllTexts(aLocale));
                        }
                    } else {
                        LOGGER.warn("The AS4 profile '" + sProfileID + "' has a validation configured, but the usage was disabled using the AS4ProfileSelector");
                    }
                }
            } else {
                if (LOGGER.isDebugEnabled())
                    LOGGER.debug("AS4 state contains no AS4 profile ID - therefore no consistency checks are performed");
            }
            // Ensure the decrypted attachments are used
            final ICommonsList<WSS4JAttachment> aDecryptedAttachments = aState.hasDecryptedAttachments() ? aState.getDecryptedAttachments() : aState.getOriginalAttachments();
            // Decompress attachments (if compressed)
            // Result is directly in the decrypted attachments list!
            _decompressAttachments(aDecryptedAttachments, aEbmsUserMessage, aState);
        } else {
            // Pull-request also requires PMode
            if (aEbmsPullRequest != null && aPMode == null)
                throw new Phase4Exception("No AS4 P-Mode configuration found for pull-request!");
        }
        final boolean bUseDecryptedSOAP = aState.hasDecryptedSoapDocument();
        final Document aRealSOAPDoc = bUseDecryptedSOAP ? aState.getDecryptedSoapDocument() : aSoapDocument;
        assert aRealSOAPDoc != null;
        // Find SOAP body (mandatory according to SOAP XSD)
        final Node aBodyNode = XMLHelper.getFirstChildElementOfName(aRealSOAPDoc.getDocumentElement(), eSoapVersion.getNamespaceURI(), eSoapVersion.getBodyElementName());
        if (aBodyNode == null)
            throw new Phase4Exception((bUseDecryptedSOAP ? "Decrypted" : "Original") + " SOAP document is missing a Body element");
        aState.setSoapBodyPayloadNode(aBodyNode.getFirstChild());
        final boolean bIsPingMessage = AS4Helper.isPingMessage(aPMode);
        aState.setPingMessage(bIsPingMessage);
        if (bIsPingMessage)
            LOGGER.info("Received an AS4 Ping message - meaning it will NOT be handled by the custom handlers.");
    }
    return aState;
}

Example 13 with Ebms3Error

use of com.helger.phase4.ebms3header.Ebms3Error in project phase4 by phax.

the class SOAPHeaderElementProcessorExtractEbms3Messaging method processHeaderElement.

@Nonnull
public ESuccess processHeaderElement(@Nonnull final Document aSOAPDoc, @Nonnull final Element aElement, @Nonnull final ICommonsList<WSS4JAttachment> aAttachments, @Nonnull final AS4MessageState aState, @Nonnull final ErrorList aErrorList) {
    final IMPCManager aMPCMgr = MetaAS4Manager.getMPCMgr();
    IPMode aPMode = null;
    final ICommonsMap<String, EAS4CompressionMode> aCompressionAttachmentIDs = new CommonsHashMap<>();
    IMPC aEffectiveMPC = null;
    String sInitiatorID = null;
    String sResponderID = null;
    final Locale aLocale = aState.getLocale();
    // Parse EBMS3 Messaging object
    final CollectingValidationEventHandler aCVEH = new CollectingValidationEventHandler();
    final Ebms3Messaging aMessaging = Ebms3ReaderBuilder.ebms3Messaging().setValidationEventHandler(aCVEH).read(aElement);
    // wellformed
    if (aMessaging == null) {
        // Invalid Header == not wellformed/invalid xml
        for (final IError aError : aCVEH.getErrorList()) {
            LOGGER.error("Header error: " + aError.getAsString(aLocale));
            aErrorList.add(SingleError.builder(aError).errorID(EEbmsError.EBMS_INVALID_HEADER.getErrorCode()).build());
        }
        return ESuccess.FAILURE;
    }
    // Remember in state
    aState.setMessaging(aMessaging);
    // 0 or 1 are allowed
    final int nUserMessages = aMessaging.getUserMessageCount();
    if (nUserMessages > 1) {
        LOGGER.error("Too many UserMessage objects (" + nUserMessages + ") contained.");
        aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
        return ESuccess.FAILURE;
    }
    // 0 or 1 are allowed
    final int nSignalMessages = aMessaging.getSignalMessageCount();
    if (nSignalMessages > 1) {
        LOGGER.error("Too many SignalMessage objects (" + nSignalMessages + ") contained.");
        aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
        return ESuccess.FAILURE;
    }
    if (nUserMessages + nSignalMessages == 0) {
        // No Message was found
        LOGGER.error("Neither UserMessage nor SignalMessage object contained.");
        aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
        return ESuccess.FAILURE;
    }
    // Check if the usermessage has a PMode in the collaboration info
    final Ebms3UserMessage aUserMessage = CollectionHelper.getAtIndex(aMessaging.getUserMessage(), 0);
    if (aUserMessage != null) {
        final Ebms3MessageInfo aMsgInfo = aUserMessage.getMessageInfo();
        if (aMsgInfo != null) {
            // Set this is as early as possible, so that eventually occurring error
            // messages can use the "RefToMessageId" element properly
            aState.setMessageID(aMsgInfo.getMessageId());
            aState.setRefToMessageID(aMsgInfo.getRefToMessageId());
            aState.setMessageTimestamp(aMsgInfo.getTimestamp());
        }
        // PartyInfo is mandatory in UserMessage
        // From is mandatory in PartyInfo
        // To is mandatory in PartyInfo
        final List<Ebms3PartyId> aFromPartyIdList = aUserMessage.getPartyInfo().getFrom().getPartyId();
        final List<Ebms3PartyId> aToPartyIdList = aUserMessage.getPartyInfo().getTo().getPartyId();
        if (aFromPartyIdList.size() > 1 || aToPartyIdList.size() > 1) {
            LOGGER.error("More than one PartyId is containted in From or To Recipient please check the message.");
            aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
            return ESuccess.FAILURE;
        }
        // Setting Initiator and Responder id, Required values or else xsd will
        // throw an error
        sInitiatorID = aFromPartyIdList.get(0).getValue();
        sResponderID = aToPartyIdList.get(0).getValue();
        final Ebms3CollaborationInfo aCollaborationInfo = aUserMessage.getCollaborationInfo();
        if (aCollaborationInfo != null) {
            // Find PMode
            String sPModeID = null;
            String sAgreementRef = null;
            if (aCollaborationInfo.getAgreementRef() != null) {
                sPModeID = aCollaborationInfo.getAgreementRef().getPmode();
                sAgreementRef = aCollaborationInfo.getAgreementRef().getValue();
            }
            // Get responder address from properties file (may be null)
            final String sAddress = AS4Configuration.getThisEndpointAddress();
            aPMode = m_aPModeResolver.getPModeOfID(sPModeID, aCollaborationInfo.getService().getValue(), aCollaborationInfo.getAction(), sInitiatorID, sResponderID, sAgreementRef, sAddress);
            // Should be screened by the XSD conversion already
            if (aPMode == null) {
                LOGGER.error("Failed to resolve PMode '" + sPModeID + "' using resolver " + m_aPModeResolver);
                aErrorList.add(EEbmsError.EBMS_PROCESSING_MODE_MISMATCH.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
        }
        // to use the configuration for leg2
        PModeLeg aPModeLeg1 = null;
        PModeLeg aPModeLeg2 = null;
        // Needed for the compression check: it is not allowed to have a
        // compressed attachment and a SOAPBodyPayload
        boolean bHasSoapBodyPayload = false;
        if (aPMode != null) {
            aPModeLeg1 = aPMode.getLeg1();
            aPModeLeg2 = aPMode.getLeg2();
            // both are present
            if (aPMode.getMEPBinding().getRequiredLegs() == 2 && aPModeLeg2 == null) {
                LOGGER.error("Error processing the UserMessage, PMode does not contain leg 2.");
                aErrorList.add(EEbmsError.EBMS_PROCESSING_MODE_MISMATCH.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
            final boolean bUseLeg1 = _isUseLeg1(aUserMessage);
            final PModeLeg aEffectiveLeg = bUseLeg1 ? aPModeLeg1 : aPModeLeg2;
            final int nLegNum = bUseLeg1 ? 1 : 2;
            if (aEffectiveLeg == null) {
                LOGGER.error("Error processing the UserMessage, PMode does not contain effective leg " + nLegNum + ".");
                aErrorList.add(EEbmsError.EBMS_PROCESSING_MODE_MISMATCH.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
            aState.setEffectivePModeLeg(nLegNum, aEffectiveLeg);
            if (_checkMPCOfPMode(aEffectiveLeg, aMPCMgr, aLocale, aErrorList).isFailure())
                return ESuccess.FAILURE;
            bHasSoapBodyPayload = _checkSOAPBodyHasPayload(aEffectiveLeg, aSOAPDoc);
            final String sEffectiveMPCID = _getMPCIDOfUserMsg(aUserMessage, aEffectiveLeg);
            // PMode is valid
            // Now Check if MPC valid
            aEffectiveMPC = aMPCMgr.getMPCOrDefaultOfID(sEffectiveMPCID);
            if (aEffectiveMPC == null) {
                LOGGER.error("Error processing the UserMessage, effective MPC ID '" + sEffectiveMPCID + "' is unknown!");
                aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
        }
        // Remember in state
        aState.setSoapBodyPayloadPresent(bHasSoapBodyPayload);
        final Ebms3PayloadInfo aEbms3PayloadInfo = aUserMessage.getPayloadInfo();
        if (aEbms3PayloadInfo == null || aEbms3PayloadInfo.getPartInfo().isEmpty()) {
            if (bHasSoapBodyPayload) {
                LOGGER.error("No PayloadInfo/PartInfo is specified, so no SOAP body payload is allowed.");
                aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
            // attachments in the message
            if (aAttachments.isNotEmpty()) {
                LOGGER.error("No PayloadInfo/PartInfo is specified, so no attachments are allowed.");
                aErrorList.add(EEbmsError.EBMS_EXTERNAL_PAYLOAD_ERROR.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
        } else {
            // Check if there are more Attachments then specified
            if (aAttachments.size() > aEbms3PayloadInfo.getPartInfoCount()) {
                LOGGER.error("Error processing the UserMessage, the amount of specified attachments does not correlate with the actual attachments in the UserMessage. Expected " + aEbms3PayloadInfo.getPartInfoCount() + " but having " + aAttachments.size() + " attachments.");
                aErrorList.add(EEbmsError.EBMS_EXTERNAL_PAYLOAD_ERROR.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
            int nSpecifiedAttachments = 0;
            for (final Ebms3PartInfo aPartInfo : aEbms3PayloadInfo.getPartInfo()) {
                // If href is null or empty there has to be a SOAP Payload
                if (StringHelper.hasNoText(aPartInfo.getHref())) {
                    // Check if there is a BodyPayload as specified in the UserMessage
                    if (!bHasSoapBodyPayload) {
                        LOGGER.error("Error processing the UserMessage. Expected a SOAPBody Payload but there is none present.");
                        aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
                        return ESuccess.FAILURE;
                    }
                } else {
                    // Attachment
                    // To check attachments which are specified in the usermessage and
                    // the real amount in the mime message
                    nSpecifiedAttachments++;
                    final String sAttachmentID = StringHelper.trimStart(aPartInfo.getHref(), MessageHelperMethods.PREFIX_CID);
                    final WSS4JAttachment aIncomingAttachment = aAttachments.findFirst(x -> EqualsHelper.equals(x.getId(), sAttachmentID));
                    if (aIncomingAttachment == null) {
                        LOGGER.warn("Failed to resolve MIME attachment '" + sAttachmentID + "' in list of " + aAttachments.getAllMapped(WSS4JAttachment::getId));
                    }
                    boolean bMimeTypePresent = false;
                    boolean bCompressionTypePresent = false;
                    if (aPartInfo.getPartProperties() != null)
                        for (final Ebms3Property aEbms3Property : aPartInfo.getPartProperties().getProperty()) {
                            final String sPropertyName = aEbms3Property.getName();
                            final String sPropertyValue = aEbms3Property.getValue();
                            if (sPropertyName.equalsIgnoreCase(MessageHelperMethods.PART_PROPERTY_MIME_TYPE)) {
                                bMimeTypePresent = StringHelper.hasText(sPropertyValue);
                            } else if (sPropertyName.equalsIgnoreCase(MessageHelperMethods.PART_PROPERTY_COMPRESSION_TYPE)) {
                                // Only needed check here since AS4 does not support another
                                // CompressionType
                                // http://wiki.ds.unipi.gr/display/ESENS/PR+-+AS4
                                final EAS4CompressionMode eCompressionMode = EAS4CompressionMode.getFromMimeTypeStringOrNull(sPropertyValue);
                                if (eCompressionMode == null) {
                                    LOGGER.error("Error processing the UserMessage, CompressionType '" + sPropertyValue + "' of attachment '" + sAttachmentID + "' is not supported.");
                                    aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
                                    return ESuccess.FAILURE;
                                }
                                aCompressionAttachmentIDs.put(sAttachmentID, eCompressionMode);
                                bCompressionTypePresent = true;
                            } else if (sPropertyName.equalsIgnoreCase(MessageHelperMethods.PART_PROPERTY_CHARACTER_SET)) {
                                if (StringHelper.hasText(sPropertyValue)) {
                                    final Charset aCharset = CharsetHelper.getCharsetFromNameOrNull(sPropertyValue);
                                    if (aCharset == null) {
                                        LOGGER.error("Value '" + sPropertyValue + "' of property '" + MessageHelperMethods.PART_PROPERTY_CHARACTER_SET + "' of attachment '" + sAttachmentID + "' is not supported");
                                        aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
                                        return ESuccess.FAILURE;
                                    } else if (aIncomingAttachment != null)
                                        aIncomingAttachment.setCharset(aCharset);
                                }
                            }
                        // else we don't care about the property
                        }
                    // got compressed
                    if (bCompressionTypePresent && !bMimeTypePresent) {
                        LOGGER.error("Error processing the UserMessage, MimeType for a compressed attachment ('" + sAttachmentID + "') is not present.");
                        aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
                        return ESuccess.FAILURE;
                    }
                }
            }
            // This may also be an indicator for "external payloads"
            if (nSpecifiedAttachments != aAttachments.size()) {
                LOGGER.error("Error processing the UserMessage: the amount of specified attachments does not correlate with the actual attachments in the UserMessage. Expected " + aEbms3PayloadInfo.getPartInfoCount() + " but having " + aAttachments.size() + " attachments. This is an indicator, that an external attached was provided.");
                aErrorList.add(EEbmsError.EBMS_EXTERNAL_PAYLOAD_ERROR.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
        }
    } else {
        // Must be a SignalMessage
        // all vars stay null
        final Ebms3SignalMessage aSignalMessage = aMessaging.getSignalMessageAtIndex(0);
        final Ebms3MessageInfo aMsgInfo = aSignalMessage.getMessageInfo();
        if (aMsgInfo != null) {
            // Set this is as early as possible, so that eventually occurring error
            // messages can use the "RefToMessageId" element properly
            aState.setMessageID(aMsgInfo.getMessageId());
            aState.setRefToMessageID(aMsgInfo.getRefToMessageId());
            aState.setMessageTimestamp(aMsgInfo.getTimestamp());
        }
        final Ebms3PullRequest aEbms3PullRequest = aSignalMessage.getPullRequest();
        final Ebms3Receipt aEbms3Receipt = aSignalMessage.getReceipt();
        if (aEbms3PullRequest != null) {
            final String sMPC = aEbms3PullRequest.getMpc();
            final IMPC aMPC = aMPCMgr.getMPCOfID(sMPC);
            if (aMPC == null) {
                LOGGER.error("Failed to resolve the PullRequest MPC '" + sMPC + "'");
                // Return value not recognized when MPC is not currently saved
                aErrorList.add(EEbmsError.EBMS_VALUE_NOT_RECOGNIZED.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
            // Create SPI which returns a PMode
            for (final IAS4ServletPullRequestProcessorSPI aProcessor : AS4ServletPullRequestProcessorManager.getAllProcessors()) {
                aPMode = aProcessor.findPMode(aSignalMessage);
                if (aPMode != null) {
                    LOGGER.info("Found PMode '" + aPMode.getID() + "' for MPC '" + sMPC + "' in SignalMessage " + aSignalMessage);
                    break;
                }
            }
            if (aPMode == null) {
                LOGGER.error("Failed to resolve PMode for PullRequest with MPC '" + sMPC + "'");
                aErrorList.add(EEbmsError.EBMS_VALUE_NOT_RECOGNIZED.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
        } else if (aEbms3Receipt != null) {
            final String sRefToMessageID = aSignalMessage.getMessageInfo().getRefToMessageId();
            if (StringHelper.hasNoText(sRefToMessageID)) {
                LOGGER.error("The Receipt does not contain a RefToMessageId");
                aErrorList.add(EEbmsError.EBMS_INVALID_RECEIPT.getAsError(aLocale));
                return ESuccess.FAILURE;
            }
        } else {
            // Error Message
            if (!aSignalMessage.getError().isEmpty()) {
                for (final Ebms3Error aError : aSignalMessage.getError()) {
                    /*
               * Ebms 3 spec 6.2.6: This OPTIONAL attribute indicates the
               * MessageId of the message in error, for which this error is
               * raised.
               */
                    if (false)
                        if (StringHelper.hasNoText(aError.getRefToMessageInError())) {
                            aErrorList.add(EEbmsError.EBMS_VALUE_INCONSISTENT.getAsError(aLocale));
                            return ESuccess.FAILURE;
                        }
                }
            }
        }
    }
    // Remember in state
    aState.setPMode(aPMode);
    aState.setOriginalSoapDocument(aSOAPDoc);
    aState.setOriginalAttachments(aAttachments);
    aState.setCompressedAttachmentIDs(aCompressionAttachmentIDs);
    aState.setMPC(aEffectiveMPC);
    aState.setInitiatorID(sInitiatorID);
    aState.setResponderID(sResponderID);
    return ESuccess.SUCCESS;
}

Example 14 with Ebms3Error

use of com.helger.phase4.ebms3header.Ebms3Error in project phase4 by phax.

the class AS4DumpReader method decryptAS4In.

/**
 * Utility method to decrypt dumped .as4in message late.<br>
 * Note: this method was mainly created for internal use and does not win the
 * prize for the most sexy piece of software in the world ;-)
 *
 * @param aAS4InData
 *        The byte array with the dumped data.
 * @param aCF
 *        The Crypto factory to be used. This crypto factory must use use the
 *        private key that can be used to decrypt this particular message. May
 *        not be <code>null</code>.
 * @param aHttpHeaderConsumer
 *        An optional HTTP Header map consumer. May be <code>null</code>.
 * @param aDecryptedConsumer
 *        The consumer for the decrypted payload - whatever that is :). May
 *        not be <code>null</code>.
 * @throws WSSecurityException
 *         In case of error
 * @throws Phase4Exception
 *         In case of error
 * @throws IOException
 *         In case of error
 * @throws MessagingException
 *         In case of error
 */
public static void decryptAS4In(@Nonnull final byte[] aAS4InData, final IAS4CryptoFactory aCF, @Nullable final Consumer<HttpHeaderMap> aHttpHeaderConsumer, @Nonnull final Consumer<byte[]> aDecryptedConsumer) throws WSSecurityException, Phase4Exception, IOException, MessagingException {
    final HttpHeaderMap hm = new HttpHeaderMap();
    int nHttpStart = 0;
    int nHttpEnd = -1;
    boolean bLastWasCR = false;
    for (int i = 0; i < aAS4InData.length; ++i) {
        final byte b = aAS4InData[i];
        if (b == '\n') {
            if (bLastWasCR) {
                nHttpEnd = i;
                break;
            }
            bLastWasCR = true;
            final String sLine = new String(aAS4InData, nHttpStart, i - nHttpStart, StandardCharsets.ISO_8859_1);
            final String[] aParts = StringHelper.getExplodedArray(':', sLine, 2);
            hm.addHeader(aParts[0].trim(), aParts[1].trim());
            nHttpStart = i + 1;
        } else {
            if (b != '\r')
                bLastWasCR = false;
        }
    }
    if (aHttpHeaderConsumer != null)
        aHttpHeaderConsumer.accept(hm);
    LOGGER.info("Now at byte " + nHttpEnd + " having " + hm.getCount() + " HTTP headers");
    WebScopeManager.onGlobalBegin(MockServletContext.create());
    try (final WebScoped w = new WebScoped();
        final AS4RequestHandler rh = new AS4RequestHandler(aCF, DefaultPModeResolver.DEFAULT_PMODE_RESOLVER, IAS4IncomingAttachmentFactory.DEFAULT_INSTANCE, new AS4IncomingMessageMetadata(EAS4MessageMode.REQUEST))) {
        final IAS4ServletMessageProcessorSPI aSPI = new IAS4ServletMessageProcessorSPI() {

            public AS4MessageProcessorResult processAS4UserMessage(final IAS4IncomingMessageMetadata aMessageMetadata, final HttpHeaderMap aHttpHeaders, final Ebms3UserMessage aUserMessage, final IPMode aPMode, final Node aPayload, final ICommonsList<WSS4JAttachment> aIncomingAttachments, final IAS4MessageState aState, final ICommonsList<Ebms3Error> aProcessingErrorMessages) {
                try {
                    final byte[] aDecryptedBytes = StreamHelper.getAllBytes(aIncomingAttachments.getFirst().getInputStreamProvider());
                    aDecryptedConsumer.accept(aDecryptedBytes);
                    LOGGER.info("Handled decrypted payload with " + aDecryptedBytes.length + " bytes");
                    return AS4MessageProcessorResult.createSuccess();
                } catch (final Exception ex) {
                    throw new IllegalStateException(ex);
                }
            }

            public AS4SignalMessageProcessorResult processAS4SignalMessage(final IAS4IncomingMessageMetadata aMessageMetadata, final HttpHeaderMap aHttpHeaders, final Ebms3SignalMessage aSignalMessage, final IPMode aPMode, final IAS4MessageState aState, final ICommonsList<Ebms3Error> aProcessingErrorMessages) {
                LOGGER.error("Unexpected signal msg");
                return AS4SignalMessageProcessorResult.createSuccess();
            }
        };
        rh.setProcessorSupplier(() -> new CommonsArrayList<>(aSPI));
        rh.handleRequest(new NonBlockingByteArrayInputStream(aAS4InData, nHttpEnd, aAS4InData.length - nHttpEnd), hm, new IAS4ResponseAbstraction() {

            public void setStatus(final int nStatusCode) {
            }

            public void setMimeType(final IMimeType aMimeType) {
            }

            public void setContent(final HttpHeaderMap aHeaderMap, final IHasInputStream aHasIS) {
            }

            public void setContent(final byte[] aResultBytes, final Charset aCharset) {
            }
        });
    } finally {
        WebScopeManager.onGlobalEnd();
    }
}

Example 15 with Ebms3Error

use of com.helger.phase4.ebms3header.Ebms3Error in project phase4 by phax.

the class Phase4PeppolServletMessageProcessorSPI method processAS4UserMessage.

@Nonnull
public AS4MessageProcessorResult processAS4UserMessage(@Nonnull final IAS4IncomingMessageMetadata aMessageMetadata, @Nonnull final HttpHeaderMap aHttpHeaders, @Nonnull final Ebms3UserMessage aUserMessage, @Nonnull final IPMode aSrcPMode, @Nullable final Node aPayload, @Nullable final ICommonsList<WSS4JAttachment> aIncomingAttachments, @Nonnull final IAS4MessageState aState, @Nonnull final ICommonsList<Ebms3Error> aProcessingErrorMessages) {
    if (LOGGER.isDebugEnabled())
        LOGGER.debug("Invoking processAS4UserMessage");
    final String sMessageID = aUserMessage.getMessageInfo().getMessageId();
    final String sService = aUserMessage.getCollaborationInfo().getServiceValue();
    final String sAction = aUserMessage.getCollaborationInfo().getAction();
    final String sConversationID = aUserMessage.getCollaborationInfo().getConversationId();
    final String sLogPrefix = "[" + sMessageID + "] ";
    final Locale aDisplayLocale = aState.getLocale();
    // Debug log
    if (LOGGER.isDebugEnabled()) {
        if (aSrcPMode == null)
            LOGGER.debug(sLogPrefix + "  No Source PMode present");
        else
            LOGGER.debug(sLogPrefix + "  Source PMode = " + aSrcPMode.getID());
        LOGGER.debug(sLogPrefix + "  AS4 Message ID = '" + sMessageID + "'");
        LOGGER.debug(sLogPrefix + "  AS4 Service = '" + sService + "'");
        LOGGER.debug(sLogPrefix + "  AS4 Action = '" + sAction + "'");
        LOGGER.debug(sLogPrefix + "  AS4 ConversationId = '" + sConversationID + "'");
        // Log source properties
        if (aUserMessage.getMessageProperties() != null && aUserMessage.getMessageProperties().hasPropertyEntries()) {
            LOGGER.debug(sLogPrefix + "  AS4 MessageProperties:");
            for (final Ebms3Property p : aUserMessage.getMessageProperties().getProperty()) LOGGER.debug(sLogPrefix + "    [" + p.getName() + "] = [" + p.getValue() + "]");
        } else
            LOGGER.debug(sLogPrefix + "  No AS4 Mesage Properties present");
        if (aPayload == null)
            LOGGER.debug(sLogPrefix + "  No SOAP Body Payload present");
        else
            LOGGER.debug(sLogPrefix + "  SOAP Body Payload = " + XMLWriter.getNodeAsString(aPayload));
    }
    // Read all attachments
    final ICommonsList<ReadAttachment> aReadAttachments = new CommonsArrayList<>();
    if (aIncomingAttachments != null) {
        int nAttachmentIndex = 0;
        for (final IAS4Attachment aIncomingAttachment : aIncomingAttachments) {
            final ReadAttachment a = new ReadAttachment();
            a.m_sID = aIncomingAttachment.getId();
            a.m_sMimeType = aIncomingAttachment.getMimeType();
            a.m_sUncompressedMimeType = aIncomingAttachment.getUncompressedMimeType();
            a.m_aCharset = aIncomingAttachment.getCharset();
            a.m_eCompressionMode = aIncomingAttachment.getCompressionMode();
            try (final InputStream aSIS = aIncomingAttachment.getSourceStream()) {
                final NonBlockingByteArrayOutputStream aBAOS = new NonBlockingByteArrayOutputStream();
                if (StreamHelper.copyInputStreamToOutputStreamAndCloseOS(aSIS, aBAOS).isSuccess()) {
                    a.m_aPayloadBytes = aBAOS.getBufferOrCopy();
                }
            } catch (final IOException | AS4DecompressException ex) {
            // Fall through
            }
            if (a.m_aPayloadBytes == null) {
                LOGGER.error(sLogPrefix + "Failed to decompress the payload");
                aProcessingErrorMessages.add(EEbmsError.EBMS_DECOMPRESSION_FAILURE.getAsEbms3Error(aDisplayLocale, aState.getMessageID()));
                return AS4MessageProcessorResult.createFailure(null);
            }
            // Read data as SBDH
            // Hint for production systems: this may take a huge amount of memory,
            // if the payload is large
            final ErrorList aSBDHErrors = new ErrorList();
            a.m_aSBDH = SBDHReader.standardBusinessDocument().setValidationEventHandler(new WrappedCollectingValidationEventHandler(aSBDHErrors)).read(a.m_aPayloadBytes);
            if (a.m_aSBDH == null) {
                if (aSBDHErrors.isEmpty()) {
                    final String sMsg = "Failed to read the provided SBDH document";
                    LOGGER.error(sLogPrefix + sMsg);
                    aProcessingErrorMessages.add(EEbmsError.EBMS_OTHER.getAsEbms3Error(aDisplayLocale, aState.getMessageID(), sMsg));
                } else {
                    for (final IError aError : aSBDHErrors) {
                        final String sMsg = "Peppol SBDH Issue: " + aError.getAsString(aDisplayLocale);
                        LOGGER.error(sLogPrefix + sMsg);
                        aProcessingErrorMessages.add(EEbmsError.EBMS_OTHER.getAsEbms3Error(aDisplayLocale, aState.getMessageID(), sMsg));
                    }
                }
                return AS4MessageProcessorResult.createFailure(null);
            }
            aReadAttachments.add(a);
            if (LOGGER.isDebugEnabled())
                LOGGER.debug(sLogPrefix + "AS4 Attachment " + nAttachmentIndex + " with ID [" + a.m_sID + "] uses [" + a.m_sMimeType + (a.m_sUncompressedMimeType == null ? null : " - uncompressed " + a.m_sUncompressedMimeType) + "] and [" + StringHelper.getToString(a.m_aCharset, "no charset") + "] and length is " + (a.m_aPayloadBytes == null ? "<error>" : Integer.toString(a.m_aPayloadBytes.length)) + " bytes" + (a.m_eCompressionMode == null ? "" : " of compressed payload"));
            nAttachmentIndex++;
        }
    }
    if (aReadAttachments.size() != 1) {
        // In Peppol there must be exactly one payload
        final String sMsg = "In Peppol exactly one payload attachment is expected. This request has " + aReadAttachments.size() + " attachments";
        LOGGER.error(sLogPrefix + sMsg);
        return AS4MessageProcessorResult.createFailure(sMsg);
    }
    // The one and only
    final ReadAttachment aReadAttachment = aReadAttachments.getFirst();
    // Extract Peppol values from SBD
    final PeppolSBDHDocument aPeppolSBD;
    try {
        if (LOGGER.isDebugEnabled())
            LOGGER.debug(sLogPrefix + "Now evaluating the SBDH against Peppol rules");
        final boolean bPerformValueChecks = Phase4PeppolServletConfiguration.isPerformSBDHValueChecks();
        aPeppolSBD = new PeppolSBDHDocumentReader(SimpleIdentifierFactory.INSTANCE).setPerformValueChecks(bPerformValueChecks).extractData(aReadAttachment.standardBusinessDocument());
        if (LOGGER.isDebugEnabled())
            LOGGER.debug(sLogPrefix + "The provided SBDH is valid according to Peppol rules, with value checks being " + (bPerformValueChecks ? "enabled" : "disabled"));
    } catch (final PeppolSBDHDocumentReadException ex) {
        final String sMsg = "Failed to extract the Peppol data from SBDH. Technical details: " + ex.getClass().getName() + " - " + ex.getMessage();
        LOGGER.error(sLogPrefix + sMsg);
        return AS4MessageProcessorResult.createFailure(sMsg);
    }
    if (m_aHandlers.isEmpty()) {
        LOGGER.error(sLogPrefix + "No SPI handler is present - the message is unhandled and discarded");
    } else {
        // Start consistency checks?
        final Phase4PeppolReceiverCheckData aReceiverCheckData = m_aReceiverCheckData != null ? m_aReceiverCheckData : Phase4PeppolServletConfiguration.getAsReceiverCheckData();
        if (aReceiverCheckData != null) {
            if (LOGGER.isDebugEnabled())
                LOGGER.debug("Performing check if the provided data is registered in our SMP");
            try {
                // Get the endpoint information required from the recipient
                // Check if an endpoint is registered
                final IParticipantIdentifier aReceiverID = aPeppolSBD.getReceiverAsIdentifier();
                final IDocumentTypeIdentifier aDocTypeID = aPeppolSBD.getDocumentTypeAsIdentifier();
                final IProcessIdentifier aProcessID = aPeppolSBD.getProcessAsIdentifier();
                final EndpointType aReceiverEndpoint = _getReceiverEndpoint(sLogPrefix, aReceiverCheckData.getSMPClient(), aReceiverID, aDocTypeID, aProcessID);
                if (aReceiverEndpoint == null) {
                    final String sMsg = "Failed to resolve SMP endpoint for provided receiver ID (" + (aReceiverID == null ? "null" : aReceiverID.getURIEncoded()) + ")/documentType ID (" + (aDocTypeID == null ? "null" : aDocTypeID.getURIEncoded()) + ")/process ID (" + (aProcessID == null ? "null" : aProcessID.getURIEncoded()) + ")/transport profile (" + m_aTransportProfile.getID() + ") - not handling incoming AS4 document";
                    LOGGER.error(sLogPrefix + sMsg);
                    return AS4MessageProcessorResult.createFailure(sMsg);
                }
                // Check if the message is for us
                _checkIfReceiverEndpointURLMatches(sLogPrefix, aReceiverCheckData.getAS4EndpointURL(), aReceiverEndpoint);
                // Get the recipient certificate from the SMP
                _checkIfEndpointCertificateMatches(sLogPrefix, aReceiverCheckData.getAPCertificate(), aReceiverEndpoint);
            } catch (final Phase4Exception ex) {
                final String sMsg = "The addressing data contained in the SBDH could not be verified. Technical details: " + ex.getClass().getName() + " - " + ex.getMessage();
                LOGGER.error(sLogPrefix + sMsg);
                return AS4MessageProcessorResult.createFailure(sMsg);
            }
        } else {
            LOGGER.info(sLogPrefix + "Endpoint checks for incoming AS4 messages are disabled");
        }
        for (final IPhase4PeppolIncomingSBDHandlerSPI aHandler : m_aHandlers) {
            try {
                if (LOGGER.isDebugEnabled())
                    LOGGER.debug(sLogPrefix + "Invoking Peppol handler " + aHandler);
                aHandler.handleIncomingSBD(aMessageMetadata, aHttpHeaders.getClone(), aUserMessage.clone(), aReadAttachment.payloadBytes(), aReadAttachment.standardBusinessDocument(), aPeppolSBD, aState);
            } catch (final Exception ex) {
                LOGGER.error(sLogPrefix + "Error invoking Peppol handler " + aHandler, ex);
                if (aHandler.exceptionTranslatesToAS4Error()) {
                    final String sMsg = "The incoming Peppol message could not be processed. Technical details: " + ex.getClass().getName() + " - " + ex.getMessage();
                    LOGGER.error(sLogPrefix + sMsg);
                    return AS4MessageProcessorResult.createFailure(sMsg);
                }
            }
        }
    }
    return AS4MessageProcessorResult.createSuccess();
}